Rubber Track for Skid Steer Loader 180*72*39

Rubber Track for Skid Steer Loader 180*72*39

滑移装载机橡胶履带180 * 72 * 39

2+
150 USD

加入意向
型号。 180*72*39
材料 橡胶和钢铁
宽度 180毫米
链接 39
保证 正常使用12个月
运输包装 裸包或托盘
起源 中国上海(大陆)
产品名称 橡胶履带
颜色 黑色
沥青 72毫米
重量 24.96公斤
商标 无标记或作为买方要求请求equests
规范 180*72*39
HS编码 8431499900

商品:橡胶履带(180mm * 72mm * 39链接)
橡胶履带的安装
A.力量太小:容易引起跳跃的牙齿,骑着牙齿或转向失效
引导轮和支撑轮和导轨跟踪脱轨或逃逸。
B.强度过大:由于过大的应变,履带钢丝在伸长时会发生变形
拉伸,这将使沥青变化,并跟踪铁芯和驱动轮
异常磨损,也会使牙齿触动,轨道损坏,机器功率损失
较大,轨道磨损加剧,皮带裂纹更容易,轨道寿命更短。赛后
是紧张的,最大下垂距离是10-15mm,正如下面的间距。
2.注意
为了延长橡胶履带的使用寿命,请完成以下工作:
A.不要急于在混凝土地板,砂石路,或者是锋利的路面上紧急地转动,以便
避免加速橡胶履带的磨损,扭曲和破裂。
B.尽量不要在腐烂的地方工作,避免橡胶履带滑动和磨损。
C.当石头或其他物体进入履带和底盘时,立即停止,
并清除砾石或障碍物。
警告
A.不要在充满石块,棘石,废铁等物体的路上行驶。
B.不要在河流,河流,海岸或任何坚固的道路上行驶。
C.不要使轨道无效登陆。
D.禁止积极驾驶。
避免快速转弯,请慢下来,逐渐转身。
关于我们:
我厂主要生产橡胶履带,特别适用于这类橡胶履带
机器:雪橇/雪地车,机器人,轮椅,(迷你)挖掘机,履带式装载机,沥青
摊铺机,农业,收割机,自卸车等。


宽度*间距(mm)
链接数量 宽度*间距(mm) 链接数量 宽度*间距(mm) 链接数量
130*72 28-53 300*52.5K 72-84 400 *72.5千瓦 68-92
150*60 28-49 300 *52.5千瓦 72-92 400*74 68-76
150*72 29-40 KB300 * 52.5 72-92 400*75.5K 74
170*60 30-40 KB300 * 52.5n 72-98 B400*86 52-55
180*60 30-40 jd300 * 52.5n 72-98 400*90 42-56
180*72 30-58 300*53K 80-84 Y400*142 36-37
180*72K 30-37 300*55 70-86 400*144 36-41
B180 * 72K 34-51 300*55.5K 76-82 Y400 * 144K 36-41
B180 * 72A 30-51 300*71K 72-55 420*100 50-58
H180*72 30-50 300*109N 25-42 450*71 76-88
190*60 30-40 K300*109 37-41 DW450 * 71 76-88
190*72 34-39 300 * 109wk 35-42 450*73.5 76-84
200*72 34-47 B300*84 78-52 450*76 80-84
200-*72K 37-47 T300 * 86K 48-52 450*81N 72-80
230*48 60-84 320*52.5 72-98 450*81W 72-78
230*48K 60-84 B320*52.5 68-98 kb450 * 81.5 72-80
230*72 42-56 320*54 70-84 K450*83.5 72-74
230*72K 42-56 B320*86 49-52 B450*84 53-56
230*96 30-48 320*90 52-56 B450*86 52-55
230*101 30-36 320*100 38-54 450*90 58-76
250*47K 84 320*100W 37-65 ku450 * 90 58-76
250*48.5K 80-88 Y320 * 106K 39-43 T450 * 100K 48-65
250*52.5K 72-78 350*52.5 70-92 K450*163 38
250*72 47-57 350*54.5K 80-86 485*92W 74
B250*72 34-60 B350 * 55K 77-98 500*90 76-82
B250 * 72B 42-58 350*56 80-86 500-92 72-84
E250*72 37-58 350*75.5K 74 500*92W 78-84
250*96 35-38 350*90 42-56 500*100 71
250*109 35-38 350*100 46-60 K500*146 35
260*55.5K 74-80 350*108 40-46 600*100 76-80
Y260*96 38-41 350*109 41-44 600*125 56-64
260*109 35-39 y370 * 107K 39-41 700*100 80-98
280*72 45-64 400*72.5N 70-80 750*150 66
Y280 * 106K 35-42 400*72.5W 68-92 800*125 80
300*52.5N 72-98 Y400 * 72.5k 72-74
300*52.5W 72-92 kb400 * 72.5k 68-76

模式:


客户订单:

作坊:


Model NO. 180*72*39
Material Rubber and Steel
Width 180mm
Links 39
Warranty 12 Months Under Normal Use
Transport Package Bare Package or Pallets
Origin Shanghai, China(Mainland)
Product Name Rubber Track
Color Black
Pitch 72mm
Weight 24.96kg
Trademark No Marks or As buyer′s requestsrequestsequests
Specification 180*72*39
HS Code 8431499900

Commodity: Rubber Track (180mm*72mm*39links)
1. Installation of the Rubber Tracks
A. Too small strength: Easily causes jumping teeth, riding a tooth or steering failure of the
guide wheels and supporting wheels and leads to track derailment or escapes.
B. Too large strength: Track wire will be deformed at the elongation by the excessive strain
tensile, which will make the pitch changed, and track core iron and the drive wheels
abnormally worn, also will make teeth touched and the track broken, the machine power loss
larger, track wear exacerbated, belt crack easier as well as the track life shorter. After the track
is strained, the maximum sag distance is 10-15mm, just as the pitch below.
2. Attention
In order to extend the life of rubber tracks, please complete the following work:
A. Never turn urgently on the concrete floor, gravel road, or hard and sharp road, in order to
avoid speeding up the wearing, twisting and chapping of the rubber track.
B. Try not to work in the rotten field, to avoid rubber track skid and wear.
C. When the stones or other objects come into the crawler and chassis, stop immediately,
and clear gravels or obstacles.
3. Warns
A. Do not travel on the road full of footstone, spinous-stone, scrap iron and other objects.
B. Do not drive in the rivers, streams and on the seacast or any rugged road.
C. Do not make the track unilaterial landing.
D. Forbid aggressive driving.
E. Avoid making a turn rapidly, please slow down and make a turn gradually.
About Us:
Our plant mainly produce Rubber Track which are specially good use for these kind of
Machine:Snowbower/Snowmobile, Robot, Wheelchair, (mini)Excavators, Track loaders, Pitch
Paver, Agricultural,Harvester, Dumpers...Etc.


Width*Pitch length(mm)
Number of Links Width*Pitch length(mm) Number of Links Width*Pitch length(mm) Number of Links
130*72 28-53 300*52.5K 72-84 400*72.5KW 68-92
150*60 28-49 300*52.5KW 72-92 400*74 68-76
150*72 29-40 KB300*52.5 72-92 400*75.5K 74
170*60 30-40 KB300*52.5N 72-98 B400*86 52-55
180*60 30-40 JD300*52.5N 72-98 400*90 42-56
180*72 30-58 300*53K 80-84 Y400*142 36-37
180*72K 30-37 300*55 70-86 400*144 36-41
B180*72K 34-51 300*55.5K 76-82 Y400*144K 36-41
B180*72A 30-51 300*71K 72-55 420*100 50-58
H180*72 30-50 300*109N 25-42 450*71 76-88
190*60 30-40 K300*109 37-41 DW450*71 76-88
190*72 34-39 300*109WK 35-42 450*73.5 76-84
200*72 34-47 B300*84 78-52 450*76 80-84
200-*72K 37-47 T300*86K 48-52 450*81N 72-80
230*48 60-84 320*52.5 72-98 450*81W 72-78
230*48K 60-84 B320*52.5 68-98 KB450*81.5 72-80
230*72 42-56 320*54 70-84 K450*83.5 72-74
230*72K 42-56 B320*86 49-52 B450*84 53-56
230*96 30-48 320*90 52-56 B450*86 52-55
230*101 30-36 320*100 38-54 450*90 58-76
250*47K 84 320*100W 37-65 KU450*90 58-76
250*48.5K 80-88 Y320*106K 39-43 T450*100K 48-65
250*52.5K 72-78 350*52.5 70-92 K450*163 38
250*72 47-57 350*54.5K 80-86 485*92W 74
B250*72 34-60 B350*55K 77-98 500*90 76-82
B250*72B 42-58 350*56 80-86 500-92 72-84
E250*72 37-58 350*75.5K 74 500*92W 78-84
250*96 35-38 350*90 42-56 500*100 71
250*109 35-38 350*100 46-60 K500*146 35
260*55.5K 74-80 350*108 40-46 600*100 76-80
Y260*96 38-41 350*109 41-44 600*125 56-64
260*109 35-39 Y370*107K 39-41 700*100 80-98
280*72 45-64 400*72.5N 70-80 750*150 66
Y280*106K 35-42 400*72.5W 68-92 800*125 80
300*52.5N 72-98 Y400*72.5K 72-74
300*52.5W 72-92 KB400*72.5K 68-76

Pattern:


Customers' order:

Workshop: