1100kW / 1375kVA中国50Hz 1000rpm中速发电机
250kVA - 3300kVA，60Hz，1200rpm，0.8PF，电压：400V，6300V，10500V，11000V
重庆科戈尔将重点生产具有环保型发展方向的大型马力发动机，节约能源。引领中国发动机领域的发展和优势，我们也将以世界先进技术为龙头。我们的产品主要用于发电机组，建筑，船舶，各种行业用途。

Googol引擎功能

所有发动机均为4冲程，P780系列为6缸，P890 / 1120/1340/1780系列将为V型8/10/12/16气缸，Q2160 / 3240/4320/5400系列将为V型8/12/16/20缸涡轮增压和水空气/空气中冷器技术体积更小，重量更轻

1，气缸盖

优质合金铸铁，具有刚性好，稳定性好，具有减少发动机工作振动和噪音的特点。湿气缸套具有良好的散热效果和工作性能，更容易更换。

曲轴钢

坚固，全平衡的曲轴设计，整体锻造更稳定，更高的强度和更长的使用寿命。主轴承采用世界领先的四级喷涂工艺生产，寿命长，可靠性高。

3.连接棒

连杆通过优点破碎式加工而成，精度更高。通过提高耐冲击性，连杆和轴承的使用寿命将延长。钢制活塞采用铝合金铸造，可提高耐用性，提高发动机输出功率。

气缸盖和阀门

2个P系列阀门和4个气缸Q系列，优化混合空气/燃油水平，导致出色的燃油消耗率和排放性能。高品质合金铸铁用于气缸盖，一缸一缸，容易用于维护和维修。

凸轮轴

用于PV系列发动机的单凸轮轴，安装在发动机中间位置，导致体积小，维护成本低。

进气和排气系统ystem

先进的涡轮增压器，水冷式或空气对冷却器技术，确保足够的进气和降低温度，提供优异的排放性能。脉冲排气歧管提高发动机在较低负载条件下运行时的效率，并导致优异燃油消耗率。

燃油系统

高压喷射系统使燃油喷射器的开启压力高于280bar，这导致了极好的燃油消耗。燃油管路中的止回阀提高了可靠性。

8.润滑系统

齿轮油泵将为所有轴承提供润滑油，并通过冷却喷嘴冷却活塞内部。

9.冷却系统

大流量水泵提供有效的冷却。 Q系列发动机采用两台水泵设计，提高了高负荷条件下的性能，并提供出色的排放性能。

电气系统

24V直流启动电机和45A电池充电系统。

标准配件
普通钢基架，减震器，排气消音器，柔性管，电池连接线，操作手册和文件。
可选附件
断路器，起动电池，发动机冷却液和油加热器，发电机空间加热器，换热器冷却，带RS232 / 485通讯接口的控制系统，主供电电池充电器，燃油水分离器，每日燃油箱，ATS和并联系统，隔音罩和移动拖车.

1100kW/1375kVA China 50Hz 1000rpm Middle Speed Generator
250kVA - 3300kVA, 60Hz, 1200rpm, 0.8PF, Voltage: 400V, 6300V, 10500V, 11000V
Chongqing Googol will be emphasis on producing big horsepower engine with the developing direction on environmental type and save energy type. We will lead the developing and keep advantage in engine filed in China, and also we will follow the top level with the world technique. Our products will be mainly used for power generator set, construction, marine ship, kinds of industry usage.

Googol Engine Feature

All Engines will be 4 cycle stroke, P780 series is 6 cylinder in line P890/1120/1340/1780 series will be V-type 8/10/12/16 cylinder,Q2160/3240/4320/5400 series will be V-type 8/12/16/20 cylinder Turbocharged and water-air / air-air intercooler technology Smaller size, lower weight

1, Cylinder Block

High quality alloy cast iron for rigidity performance and good stability with the feature for reducing engine working vibration and noise. Wet cylinder liner with good cooling effect and work performance, more easy to replaced.

2.Crankshaft- Steel

Robust and fully balanced crankshaft design by integral forging for a more steadily and higher strength and longer working life.The main bearing is produced by world leading quaternary spray coating process with long life and reliability.

3.Connect rod

Connect rod is made by advantage up broken type process with higher precision. It will lead to longer life for connect rod and bearing by increase the withstand impact.Steel piston is casting with aluminum alloy for better durability and boost engine output.

4.Cylinder Head and Valve

2 valves for P series and 4 valves for Q series per cylinder, Optimize the mixed air/fuel level which lead to an excellent fuel consumption rate and emission performance.High quality alloy cast iron for the cylinder head, one cylinder with one head, easy for maintenance and service.

5. Camshaft

Single camshaft for PV series engine and installed in the middle position of engine which lead to small size and low maintenance cost.

6. Intake & Exhaust Systemystemystem

Advanced turbocharger and water-to -air or air-to-air after cooler technology, ensure enough intake air and decrease the temperature, provide excellent emission performance.Pulse exhaust manifold increase the efficiency when engine run at lower load condition, and lead to excellent fuel consumption rate.

7. Fuel System

High pressure injection system make the fuel injector open pressure above 280bar, which lead to an excellent fuel consumption. Check valve in fuel lines improve reliability.

8. Lubrication System

Gear oil pump will supply the lubrication oil to all bearings, and cooling the piston inner through the cooling jet.

9.Cooling System

Great flux water pump provide effective cooling. Two water pump design for Q series engine, improve the performance at high load condition, and provide excellent emission performance.

10.Electrical System

24V DC starting motor and 45A battery charging system.

Standard Accessory
Common steel base frame, Damper, Exhaust silencer, Flexible pipe, Battery connecting wires, Operation manual and document.
Optional Accessory
Circuit breaker, Starting Battery, Engine coolant and oil heater, Alternator space heater, Cooling for heat exchanger, Control system with RS232/485 communication interface, Battery charger by main supply, Fuel-water separator, Daily fuel tank, ATS and paralleling system, Soundproof Canopy and Moving Trailer.