Wns Industrial Oil/Gas Fired Hot Water Boiler with Burner
Wns工业油/煤气燃烧热水锅炉与燃烧器
WNS工业油/煤气燃烧热水锅炉：
热水锅炉的输出功率为1.4〜14MW，水的使用温度为95度或115度，回水温度为70度
1，采用内燃三通湿式结构，结构合理，紧凑。
2，锅炉采用带内置干扰翅片的螺纹管，加强传热效果，大大提高加热效率。
3，前后可拆卸烟盒门，方便锅炉的维修检查。
4，锅炉本体可根据要求镀锌，提供清洁生活热水。
5，通过设置燃烧机和循环水泵的启动和停止温度，控制系统将根据设定条件自动运行，同时显示系统状态和进出水温度。故障时显示报警信息。
6，在手动控制时，直接对循环水泵和燃烧器进行操作，在故障时做相应的指示，避免手动操作，以保证系统的安全。冷凝式热交换器可以添加在烟雾出口，以降低烟雾排放温度，吸收烟雾中的显热和潜热，提高加热效率（高达95％）。
热水锅炉的输出功率为1.4〜14MW，水的使用温度为95度或115度，回水温度为70度
1，采用内燃三通湿式结构，结构合理，紧凑。
2，锅炉采用带内置干扰翅片的螺纹管，加强传热效果，大大提高加热效率。
3，前后可拆卸烟盒门，方便锅炉的维修检查。
4，锅炉本体可根据要求镀锌，提供清洁生活热水。
5，通过设置燃烧机和循环水泵的启动和停止温度，控制系统将根据设定条件自动运行，同时显示系统状态和进出水温度。故障时显示报警信息。
6，在手动控制时，直接对循环水泵和燃烧器进行操作，在故障时做相应的指示，避免手动操作，以保证系统的安全。冷凝式热交换器可以添加在烟雾出口，以降低烟雾排放温度，吸收烟雾中的显热和潜热，提高加热效率（高达95％）。
WNS Industrial Oil/Gas Fired Hot Water Boiler with Burner:
Output of the hot water boiler is 1.4~14MW, water service temperature is 95degree or 115degree, water return temperature is 70degree
1,Adopt the internal combustion three pass wetback structure, reasonable and compacted.
2,The boiler is adopting threaded pipes with built-in interfere fins, strengthening the heat transferring effect and improve the heating efficiency greatly.
3,The dismountable smoke case doors in front and back are convenient for the maintenance and checking of the boiler.
4,The boiler body can be galvanized according to requirement so as to provide clean life hot water.
5,By the setting of the combustion machine and the circulation water pump starting and stopping temperature, the control system will automatically run according to the set conditions, while displaying the system status and inlet and outlet water temperature. Displaying alarming information when in malfunction.
6,When in manual control, operate directly to the circulation water pump and combustion, make relevant indications when in malfunction, avoid manual operation to ensure the safety of the system. Condensation Heat Exchanger can be added in the smoke outlet to decrease the smoke discharging temperature, absorb the sensible and latent heat in the smoke, improve the heating efficiency (up to 95%).
Output of the hot water boiler is 1.4~14MW, water service temperature is 95degree or 115degree, water return temperature is 70degree
1,Adopt the internal combustion three pass wetback structure, reasonable and compacted.
2,The boiler is adopting threaded pipes with built-in interfere fins, strengthening the heat transferring effect and improve the heating efficiency greatly.
3,The dismountable smoke case doors in front and back are convenient for the maintenance and checking of the boiler.
4,The boiler body can be galvanized according to requirement so as to provide clean life hot water.
5,By the setting of the combustion machine and the circulation water pump starting and stopping temperature, the control system will automatically run according to the set conditions, while displaying the system status and inlet and outlet water temperature. Displaying alarming information when in malfunction.
6,When in manual control, operate directly to the circulation water pump and combustion, make relevant indications when in malfunction, avoid manual operation to ensure the safety of the system. Condensation Heat Exchanger can be added in the smoke outlet to decrease the smoke discharging temperature, absorb the sensible and latent heat in the smoke, improve the heating efficiency (up to 95%).
