10kw Solar Inverter Pure Sine Wave for All Electric Equipments
10kw太阳能逆变器纯正弦波为所有电气设备
| 型号。 | pl16 10000w |
| 相 | 单 |
| 证明 | ce，iso9001 |
| 类型 | 直流/交流逆变器 |
| 电路拓扑 | 全桥型 |
| 输入电压范围 | 185vac-275VAC |
| 频率范围 | 40HZ-在65Hz |
| 功率因数 | 0.9~1.0 |
| 维（L * W * H） | 538 * 255 *630毫米 |
| Warrenty | 12个月 |
| 规范 | CE |
| HS编码 | 8504403090 |
| 源流的性质 | 无源变频器 |
| 输出功率 | 10000W |
| 牌 | STCB |
| 能量源 | 电力 |
| 波弦的性质 | 正弦波逆变器 |
| 应用 | 所有电气设备 |
| 额定输出功率 | 10000W |
| 标称充电电流 | 35A / 50A |
| 净重 | 66.1公斤 |
| 商标 | STCB |
| 起源 | 广州深圳 |
10kw太阳能逆变器纯正弦波为所有电气设备
主要特点：
1. LCD数字显示实时显示电压，负载和电池信息。
2. 峰值功率是额定功率的3倍。
3. 使用感性负载，如空调，电机门等。
4. 纯正弦波输出，适用于敏感负载。
5. 5级逐步充电
6. 快速强大的充电器，35A和50A
7. 内置充电控制器40A / 60A（可选）
8. 发电机兼容
9. 高功率因数0.9，功耗低。
10. 在电池和线路模式之间自动转移。
11. 微处理器控制保证高可靠性。
12. 遥控功能。
13. 防范：过载，过温，过充，电池电量不足
产品描述：
规范：
1. LCD数字显示实时显示电压，负载和电池信息。
2. 峰值功率是额定功率的3倍。
3. 使用感性负载，如空调，电机门等。
4. 纯正弦波输出，适用于敏感负载。
5. 5级逐步充电
6. 快速强大的充电器，35A和50A
7. 内置充电控制器40A / 60A（可选）
8. 发电机兼容
9. 高功率因数0.9，功耗低。
10. 在电池和线路模式之间自动转移。
11. 微处理器控制保证高可靠性。
12. 遥控功能。
13. 防范：过载，过温，过充，电池电量不足
产品描述：
规范：
| 模型 | pl16-8kw | pl16-10kw | pl16-12kw | |
| 线路模式规格： | ||||
| 输入电压 | 输入电压波形 | 正弦（效用或发电机） | ||
| 标称输入电压 | 230V交流 | |||
| 输入电压范围 | 185vac-275VAC | |||
| 输入 频率 | 标称输入频率 | 50Hz / 60Hz（自动检测） | ||
| 频率范围 | 40HZ-65HZ | |||
| 主要 功能 | 输出电压波形 | 与输入波形相同 | ||
| 过载保护 （SMPS负载） | 保险丝 | |||
| 输出短路 电路保护 | 保险丝 | |||
| 转换开关额定值 | 63A / 80A / 100A | |||
| 最大绕过 过载电流 | 100A | |||
| 电池反转模式规格： | ||||
| 产量 | 输出电压波形 | 正弦波 | ||
| 额定输出功率（KW） | 8千瓦/10千瓦/12千瓦 | |||
| 功率因数 | 0.9~1.0 | |||
| 标称输出电压（V） | 230Vac±10％有效值; 10％有效值;10% rms | |||
| 标称输出频率 | 60Hz±0.3Hzn; 0.3Hzn; 0.3Hz | |||
| 50Hz±0.3Hzn; 0.3Hzn; 0.3Hz | ||||
| 直流电压 | 标称直流输入电压 | 48V / 72V | ||
| 直流电压范围 | 40-62Vdc，适用于48VDC / 70-93Vdc，适用于72VDC | |||
| 低电量报警 | 42.0Vdc±1.2Vdc，用于48V电池电池 battery | |||
| 63.0Vdc±1.8Vdc，用于72V电池电池 battery | ||||
| 直流输入范围 | 40.0Vdc-60Vdc，用于48V电池 | |||
| 64Vdc -96Vdc，72V电池 | ||||
| 充电器 | 标称充电电流 | 35A / 50A（5级可调充电电流） | ||
| 过充电保护 | 蝙蝠。 ≥62Vdc/ 93Vdc，60s后60s，每1s发出哔声0.5sfter 60s | |||
| 效率 | 效率（电池模式） | ≥85％E 85％;85% | ||
| 效率（线路模式） | >98% | |||
| 转移时间 | Ac到Dc | 20ms（最大） | ||
| Dc到Ac | 15ms（最大） | |||
| 系统 参数 | 过载保护 | 110% 负载> 150％，每1秒发出哔声0.5s，20秒20秒后发出故障。 | ||
| 短路保护 | 电流限制（10s后故障） | |||
| 浪涌等级（10s） | 1：3（va） | |||
| 省电器 | 加载<25W (Enabled on" P/S auto"?setting of Remote control)emote control) | |||
| 保护 | 电池电量低，过充，过载，过温。 | |||
| 指标 | led + lcd显示 | |||
| 一般 产品规格 | 温度范围 | 0ºC至40ºC40ºCrdm;Co 40ºC | ||
| 储存温度 | -15ºC〜60ºcc〜60℃rdm;CC~60ºC | |||
| 工作湿度 | 5％至95％（非冷凝） | |||
| 声音噪音 | 最大60dB | |||
| 冷却 | 强制空气，变速风扇 | |||
| 维（L * W * H） | 538 * 255 *630毫米 | |||
| 净重/公斤） | 8千瓦 | 10千瓦 | 12千瓦 | |
| 60公斤 | 65.5公斤 | 71公斤 | ||
公司及厂房：
项目和展览会
常问问题
Q1：为什么要选择我们？
--- 16年UPS经验
---海内外市场专业团队
- 上海合作组织会议2015年上海 - 昆明高速铁路项目提供商
---合格产品加上竞争价格
---交货时间
---诚信服务
Q2：您的售后服务如何？
---我们自交货之日起提供12-24个月保修期，免费维修/
更换期间 保修期。
Q3：你有什么样的认证？
--- iso9000，ce，rohs，ul等等
我们的产品可以根据不同国家的要求进行不同的劳动力测试。
Q4：交货时间：
---标准产品可在15天内交货;定制产品可以
内部开发 45-60天。
| Model NO. | PL16 10000w |
| Phase | Single |
| Certification | CE, ISO9001 |
| Type | DC/AC Inverters |
| Circuit Topologies | Full-Bridge Type |
| Input Voltage Range | 185VAC-275VAC |
| Frequency Range | 40Hz-65Hz |
| Power Factor | 0.9~1.0 |
| Dimension(L*W*H) | 538*255*630mm |
| Warrenty | 12 Months |
| Specification | CE |
| HS Code | 8504403090 |
| Nature of Source Flow | Passive inverter |
| Output Power | 10000W |
| Brand | Stcb |
| Power Source | Electric Power |
| Nature of Wave String | Sine Wave Inverter |
| Application | All Electrical Equipments |
| Rated Output Power | 10000W |
| Nominal Charge Current | 35A/50A |
| Net Weight | 66.1kg |
| Trademark | STCB |
| Origin | Guangzhou Shenzhen |
10kw solar inverter pure sine wave for all electric equipments
Main Features:
1. LCD digital display show voltage, load and battery information in real time.
2. Peak power is 3 times of rated power.
3. Work with inductive load such as air conditioner, motor door and so on.
4. Pure sine wave output, available for sensitive load.
5. 5 stages progressive charging
6. Fast and powerful charger with 35A and 50A
7. Built in charge controller 40A/60A (Optional)
8. generator compatible
9. High power factor 0.9, low power consumption.
10. Automatically transfer between battery and line modes.
11. Microprocessor control guarantees high reliability.
12. Remote control function.
13. Protection against: Over load, over temperature, over charging, low battery
Product description:
Specification:
1. LCD digital display show voltage, load and battery information in real time.
2. Peak power is 3 times of rated power.
3. Work with inductive load such as air conditioner, motor door and so on.
4. Pure sine wave output, available for sensitive load.
5. 5 stages progressive charging
6. Fast and powerful charger with 35A and 50A
7. Built in charge controller 40A/60A (Optional)
8. generator compatible
9. High power factor 0.9, low power consumption.
10. Automatically transfer between battery and line modes.
11. Microprocessor control guarantees high reliability.
12. Remote control function.
13. Protection against: Over load, over temperature, over charging, low battery
Product description:
Specification:
| MODEL | PL16-8KW | PL16-10KW | PL16-12KW | |
| Line Mode Specifications: | ||||
| Input Voltage | Input Voltage Waveform | Sinusoidal (utility or generator) | ||
| Nominal Input Voltage | 230Vac | |||
| Input voltage range | 185VAC-275VAC | |||
| Input Frequency | Nominal Input Frequency | 50Hz/ 60Hz (Auto detection) | ||
| Frequency Range | 40hz-65hz | |||
| Main Functions | Output Voltage Waveform | As same as Input Waveform | ||
| Over-Load Protection (SMPS load) | Fuse | |||
| Output Short Circuit Protection | Fuse | |||
| Transfer Switch Rating | 63A/80A/100A | |||
| Max Bypass Overload Current | 100A | |||
| Battery Invert Mode Specifications: | ||||
| output | Output Voltage Waveform | Sine wave | ||
| Rated Output Power (KW) | 8kw/10kw/12kw | |||
| Power Factor | 0.9~1.0 | |||
| Nominal Output Voltage (V) | 230Vac ±10% rms;10% rms;10% rms | |||
| Nominal Output Frequency | 60Hz ± 0.3Hzn; 0.3Hzn; 0.3Hz | |||
| 50Hz ± 0.3Hzn; 0.3Hzn; 0.3Hz | ||||
| DC Voltage | Nominal DC Input Voltage | 48V/72V | ||
| DC Voltage range | 40-62Vdc for 48VDC/ 70-93Vdc for 72VDC | |||
| Low Battery Alarm | 42.0Vdc ± 1.2Vdc for 48V battery battery battery | |||
| 63.0Vdc ± 1.8Vdc for 72V battery battery battery | ||||
| DC input Range | 40.0Vdc-60Vdc for 48V battery | |||
| 64Vdc -96Vdc for 72V battery | ||||
| Charger | Nominal Charge Current | 35A/50A(5 stages adjustable charging current) | ||
| Over Charge Protection | Bat. ≥62Vdc / 93Vdc, beeps 0.5s every 1s & fault after 60sfter 60sfter 60s | |||
| Efficiency | Efficiency (Battery Mode) | ≥85%e;85%;85% | ||
| Efficiency (Line Mode) | >98% | |||
| Transfer Time | Ac to Dc | 20ms (Max) | ||
| Dc to Ac | 15ms (Max) | |||
| System parameter | Over-Load Protection | 110% Load﹥150%, beeps 0.5s every 1s, and Fault after 20s.20s. | ||
| Short Circuit Protection | Current limit (Fault after 10s) | |||
| Surge rating (10s) | 1:3 (VA) | |||
| Power saver | Load<25W (Enabled on" P/S auto"?setting of Remote control)emote control) | |||
| Protections | Low battery, over charging, over load , over temp. | |||
| Indicators | LED+LCD Display | |||
| General Specifications | Temperature Range | 0ºCto 40ºCo 40ºCrdm;Co 40ºC | ||
| Storage temperature | -15ºC~60ºCC~60ºCrdm;CC~60ºC | |||
| Operation humidity | 5% to 95%(non-condensing) | |||
| Audible Noise | 60dB max | |||
| Cooling | Forced air, variable speed fan | |||
| Dimension(L*W*H) | 538*255*630mm | |||
| Net weight(Kg) | 8KW | 10KW | 12KW | |
| 60kg | 65.5kg | 71kg | ||
Company and Factory:
Project and Tradeshow:
FAQ
Q1: Why you should choose us?
---16 years UPS experiences
---Professional team for both oversea and domestic market
--UPS provider of SCO meeting 2015 and Shanghai-Kunming high-speed railway project
---Qualified product plus competitable prices
---Delivery in time
---Sincerely services
Q2: How is your after-sale service?
---We provide 12-24 months warranty since the delivery date and free maintenance /
replacement during warranty period.
Q3: What kind of certification you have?
---ISO9000, CE,ROHS,UL,and so on
Our products could pass different labor testing according to different countries' requirements.
Q4: Delivery time:
---Standard products could be delivered within 15 days; customized products could be
developed within 45-60days.
