特征：
分相调节全自动补偿电压稳定器/调节器由三组单相稳压器组成，由“星形”连接组成。具有三相独立电压稳定功能，适用于三相不平衡输入电压或不平衡三相负载。此外，它具有调压稳定性，高电压稳定精度和三相自动平衡等功能。该串联稳压器的调压电压部分采用支柱，因此功率更大，可靠性更高。
应用：
广泛应用于工业，通讯，学校，酒店等大电力需求的地方，作为整个电压稳定单电压稳定化。zing.
规范：
阶段号： 三相四相系统，分相调节或各相独立控制
输入电压：
相电压220V±20％（176〜264VAC），线电压380V±20％（304〜356VAC）; 0％（304〜356VAC）;0%(304~356VAC);
相电压220V±25％（165〜275VAC），线电压380V±20％（285〜475VAC）（可选）5VAC）（可选）5VAC)(Optional)
相电压220V±30％（154〜286VAC），线电压380V±30％（266〜494VAC）（可选）4VAC）（可选）4VAC)(Optional)
注意： 对于其他超低输入电压（Vi），我们将自己专门设计，即在AVR外部增加一个升压升压变压器或其他设计好的！
输出电压： 相电压220VAC，线电压380VAC
电压精度：±2-5％（可调））ustable)
频率： 50Hz / 60Hz的
效率： >95%
响应时间： ≤1.5S（10％输入电压偏差）离子）ion)
环境温度：-10〜+40cºcºrdm;Cº
绝缘电阻：≥2mΩ; 2MΩmega;; 2MΩ
波形失真： 非额外的波形失真
保护：
过电压，过流，相位故障，相序，机器故障指示等。保护功能。
过载能力： 1分钟。额定电流为2次
电阻强度： 电源正弦曲线为2000VAC，无故障，持续1min时闪烁。
备注：
定制规格是可以接受的。
数据表SBW-F -...分相调节全自动补偿电压稳定器/调节器

SBW-F-40KVA的照片供您参考！

Feature:
The Split-Phase Regulating Full-Automatic Compensated Voltage Stabilizer/Regulator is composed of three sets of single-phase voltage stabilizer by 'star-shaped' connection. With the function of three phases independently voltage-stabilizing, it applies to the unbalanced input voltage of three phases or unbalanced three phase loads. Moreover, it has the functions such as voltage regulating stability, high voltage stabilizing precision, and auto-balance of three phases. The regulating voltage voltage parts of this series voltage stabilizer is adopted the pillar, Therefore, it has more power and more reliability.
Application:
It is widely used in the place with large electricity demands such as factories, post & communication, schools, hotel etc., acted as whole voltage-stabilization single voltage-stabilizing.zing.zing.
Specification:
Phase No.: Three phase four system, Split-Phase Regulating or Each Phase controlling independently
Input voltage:
Phase voltage 220V± 20%(176~264VAC), wire voltage 380V± 20%(304~356VAC);0%(304~356VAC);0%(304~356VAC);
Phase voltage 220V± 25%(165~275VAC), wire voltage 380V± 20%(285~475VAC)(Optional)5VAC)(Optional)5VAC)(Optional)
Phase voltage 220V± 30%(154~286VAC), wire voltage 380V± 30%(266~494VAC)(Optional)4VAC)(Optional)4VAC)(Optional)
Note: for other super lower input voltage(Vi), we'll specially designed by ourselves, namely adding one step-up boost transformer outside AVR or other designed well!
Output voltage: Phase voltage 220VAC, wire voltage 380VAC
Accuracy of voltage:± 2-5%(adjustable)justable)ustable)
Frequency: 50Hz/60Hz
Efficiency: >95%
Response time: ≤ 1.5S(against 10% input voltage deviation)ion)ion)
Ambient Temperature:-10~+40CºCºrdm;Cº
Insulation resistance:≥ 2MΩ; 2MΩmega;; 2MΩ
Waveform distortion: Non additional waveform distortion
Protection:
Over voltage, over current, phase failure, phase sequence, machine fault indication etc. Protection function.
Over-load capacity: 1min. At the rated current of 2times
Electricity-resistance strength: Power frequency sinusoidal is 2000VAC without breakdown and flash over when it lasts 1min.
Remarks:
Custom-made specifications are acceptable.
Datasheet of SBW-F-...Split-phase Regulating Full-automatic Compensated Voltage Stabilizer/Regulator

Photo of SBW-F-40KVA, for your reference!