Must Ep3000 1kw-6kw Pure Sine Wave AC to DC 240V 48V Power Inverter
必须Ep3000 1kw-6kw纯正弦波交流到直流240V 48V变频器
| 型号。 | ep3000 1kw-6kw |
| 输出功率 | 300瓦特-4000W |
| 颜色黑白： | 接口：Teminal |
| 显示 | LED / LCD |
| 峰值功率 | 3次正常 |
| 输入电压 | 110V / 220V |
| 重量 | >20公斤;20公斤 |
| 相 | 单 |
| 牌 | 必须/ OEM |
| 规范 | CE |
| HS编码 | 8504403090 |
| 证明 | saa，ce，iso9001 |
| 类型 | 直流/交流逆变器 |
| 最大充电电流 | 75A |
| 纯正弦波 | 是 |
| 功率 | 1-6kw |
| 低频 | 是 |
| 保证 | 1年 |
| 能量源 | 太阳能 |
| 商标 | 必须或者是 |
| 起源 | 中国深圳 |
必须EP3000 1KW-6KW纯正弦波交流到直流240v 48v电源逆变器
应用于工业过程控制，电池充电要求，个人电脑，电信，图形显示，电镀和黄金回收行业以及商业，电信，矿业或工业市场所需的任何地方。商业太阳能，休闲车辆，移动办公室，工业风力，船舶，卡车和RV住宅太阳能，应急车辆，住宅风力，车队和多用途车辆，露营和户外活动，可再生通讯，e Newsletter,
启动重载荷的软起动能力
新功率因数校正（PFC）充电
提供1000和3000瓦特模型效用级，正弦波功率
耐用的建筑，在极端环境条件下长寿命
70 AMP自动三级电池充电器（散装，吸收和浮动）
电池均衡与远程温度传感器，以提高性能
低空闲电流（小于1瓦）在没有负载的情况下节省能量
内置起动控制电路，用于二线和三线发电机起动系统
新的数字显示器在反相时显示千瓦（kW），充电时AMPS（A）更好的热性能可使全输出功率达到50°C（122°F），而无需降额高浪涌电容开始更困难的负载并可靠地处理过载条件简化控制与一个卡扣盖，保护设置不被意外更改改变y changed
应用于工业过程控制，电池充电要求，个人电脑，电信，图形显示，电镀和黄金回收行业以及商业，电信，矿业或工业市场所需的任何地方。商业太阳能，休闲车辆，移动办公室，工业风力，船舶，卡车和RV住宅太阳能，应急车辆，住宅风力，车队和多用途车辆，露营和户外活动，可再生通讯，e Newsletter,
启动重载荷的软起动能力
新功率因数校正（PFC）充电
提供1000和3000瓦特模型效用级，正弦波功率
耐用的建筑，在极端环境条件下长寿命
70 AMP自动三级电池充电器（散装，吸收和浮动）
电池均衡与远程温度传感器，以提高性能
低空闲电流（小于1瓦）在没有负载的情况下节省能量
内置起动控制电路，用于二线和三线发电机起动系统
新的数字显示器在反相时显示千瓦（kW），充电时AMPS（A）更好的热性能可使全输出功率达到50°C（122°F），而无需降额高浪涌电容开始更困难的负载并可靠地处理过载条件简化控制与一个卡扣盖，保护设置不被意外更改改变y changed
| 模型 | 115V型号 | 230V型号 | |
| 产量 | |||
| 功率水平以标称输入为准 | 1千瓦;2千瓦;3千瓦;4千瓦 | 1千瓦;2千瓦;3千瓦;4千瓦;5千瓦;6千瓦 | |
| 输出电压 | 110V / 115V / 120V可选 | 220V / 230V / 240V可选 | |
| 电压波形 | 纯正弦波 | ||
| 波峰因子 | 3:'1 | ||
| 输出频率 | 自动选择50 / 60Hz，47Hz〜55Hz，标称50Hz，56Hz〜65Hz，标称60Hz | ||
| （与电源同步） | |||
| 规定（名义） | 标称电压电压的±20％ voltage | ||
| 规 | 所选输出电压的±3％（可调整with the | ||
| （电池模式） | 远程设置软件） | ||
| 转移时间 | 断电3ms典型值，掉电1ms典型值，电池模式为正常模式：1ms典型值 | ||
| 过流保护 | 过载报警等级100％〜120％ | ||
| 过载停机等级120％〜190％ | |||
| （可使用远程设置软件进行调整） | |||
| 输入 | |||
| 额定电压 | 110V / 115V / 120V可选 | 220V / 230V / 240V可选 | |
| 输入频率 | 47Hz〜65Hz，50 / 60Hz自动感应 | ||
| 效率（正常模式） | 99% | ||
| 噪声滤波 | 全时EMI / RFI滤波 | ||
| 过流保护 | 可重新设置过电流保护器：1000W〜4KW | 交流保险丝1000VA / 2000VA，可重新设置的过电流保护器：1000W〜6KW | |
| 电压范围 | 85v〜145v | 185v〜265v | |
| AVR范围 （2雄鹿，2升） | 增强型降压：+ 28％选定的额定电压 | ||
| 降压模式：+ 10％选定的额定电压 | |||
| 升压模式：选定额定电压的-10％ | |||
| 增强型升压：-25％选定的额定电压 | |||
| 浪涌保护 | 1KW / 2KW：416焦耳 | 1KW-3KW：430焦耳 | |
| 3KW〜4KW：724焦耳 | 4KW-6KW：826焦耳 | ||
| 电池 | |||
| 电池类型 | 铅酸50Ah〜500Ah（推荐） | 铅酸50Ah〜500Ah（推荐） | |
| 直流电压 | 1千瓦/2千瓦：12VDC | 1千瓦/2千瓦/3千瓦：12VDC | |
| 2千瓦/3千瓦：24VDC | 2千瓦/3千瓦：24VDC | ||
| 3千瓦/4千瓦：48VDC | 3千瓦/4千瓦/5千瓦/6千瓦：48VDC | ||
| 典型备份时间 | 没有限制 | ||
| 充电方式 | 智能脉冲充电两种充电模式？电池充电时EQuick充电 | ||
| 没有充满电，当电池充满电90％时，涓流充电。 | |||
| 最大充电电流 | 1000w 12v：35a | 1000w 24v：35a | |
| 2000w 12v：65a | 2000w 24v：35a | ||
| 3000w 24v：45a | 4000w 48v：35a | ||
| 5000w 48v：40a | 6000w 48v：50a | ||
| 平均收费 | 快速充电模式：最大15.7V-54V。 | ||
| 每个电池的电压 | 涓流充电模式：13.5V -52V（可通过远程设置软件调节） | ||
| 保护 | 过流保护和过充保护电压保护（SCR控制））trol) | ||
| 热保护（CPU控制） | |||
| 当本机内的温度超过45°C时，充电器将停止充电2分钟，然后充电2分钟。这个周期将是重复的peate | |||
| 监控 | 智能监控和警告电池故障或开路电池。tery. | ||
| 每次上电或每6天自动检测。 | |||
| 太阳能充电器 | |||
| 额定电压 | 12v / 24v / 48v | 12v / 24v / 48v | |
| 直流输入范围 | 12V型号：12〜21Vdc; 24V型号：24〜42Vdc; 48V型号：48〜84Vdc | ||
| 充电方式 | 通过PWM控制的电流限制的恒定电压 | ||
| 充电电压 | 12V型号：13.5Vdc; 24V型号：27.0Vdc; 48V型号：54.0Vdc | ||
| 额定功率 | 12V型号：1000W / 2000W（13.5Vdc @ 37A） | ||
| 24V型号：1000W / 2000W（37.0Vdc @ 37A） | |||
| 48v型号：3kw / 5kw / 6kw（54vdc @ 18.5a） | |||
| 保护 | 直流输入极性保护，直流输入短路保护（电池时） | ||
| 连接），直流输出过流保护 | |||
| 沟通与管理EMENT | |||
| 标准接口端口 | UPSilon2000兼容;可选用于RS232。 | ||
| 可选接口部分 | RJ45（浪涌保护），DB9 | ||
| 控制面板 | LCD或LED可选 | ||
| 声音报警 | 电池报警：电池电量低，电池电压过高ltage | ||
| 异常操作报警：过载，短路和过热 heat | |||
| 绿色模式功能 | 1％到14％的满载（可通过使用远程设置软件进行调整） | ||
| （停电时自动关闭） | 默认设置为OFF。 | ||
| 冷却风扇控制 | 自动开/关，由温度和运行模式模式控制 mode | ||
| 环境安全 | |||
| 工作温度 | 高达1500米：0°C至40°C（32°F至104°F），例如：Fto 104°F）g;F)eg;Fto 104°F) | ||
| 运输/储存温度 | -15°C至55°（5°F至131°F）至131°F）g;F)to 131°F) | ||
| 相对湿度 | 5 - 95％非冷凝 | ||
| 运行高度 | 0〜3000米 | ||
| 质量控制体系 | iso 9001：2000，iso 14002-2004 | ||
| 物理 | |||
| 出现 | 尺寸（mm）长宽高 | 570*315*300 | |
| 重量（Kg） | 1000W / 18.2kg; 2000W / 19.5kg; 3000W / 23.5kg | ||
| 尺寸（mm）长宽高 | 755*319*288 | ||
| 重量（Kg） | 4000W / 35kg; 5000W / 38kg; 6000W / 40kg | ||
| Model NO. | EP3000 1KW-6KW |
| Output Power | 300W-4000W |
| Color Black and White: | Interface: Teminal |
| Display | LED/LCD |
| Peak Power | 3 Times as Normal |
| Input Voltage | 110V/220V |
| Weight | ﹥20kg;20kg |
| Phase | Single |
| Brand | Must/OEM |
| Specification | CE |
| HS Code | 8504403090 |
| Certification | SAA, CE, ISO9001 |
| Type | DC/AC Inverters |
| Max Charge Current | 75A |
| Pure Sine Wave | Yes |
| Power | 1-6kw |
| Low Frequency | Yes |
| Warranty | 1 Year |
| Power Source | Solar Power |
| Trademark | MUST or OEM |
| Origin | Shenzhen, China |
MUST EP3000 1KW-6KW pure sine wave ac to dc 240v 48v power inverter
Applied in the field of industrial process controls, battery charging requirements, personal computers, telecommunications, graphics displays, plating and gold recovery industries and wherever required in the commercial, telecoms, mining or industrial markets. Commercial Solar, Recreational Vehicles, Mobile Office, Industrial Wind, Boats, Truck, & RV Residential Solar, Emergency Vehicles, Residential Wind, Fleet & Utility Vehicles, Camping & Outdoors, Renewable Newsletter,le Newsletter,e Newsletter,
Soft start capability for starting heavy loads
New power factor corrected (PFC) charging
Available in 1000 and 3000 watt models Utility grade, sine wave power
Durable construction for long life under extreme environmental conditions
70 AMP automatic three-stage battery charger (bulk, absorption, and float)
Battery equalization with remote temperature sensor for increased performance
Low idle current (less than 1 watt) conserves energy when no loads are present
Built-in starting control circuits for two- and three-wire generator starting systems
New digital display shows kilowatts (kW) when inverting and AMPS (A) when charging Better thermal performance allows full output power to 50° C (122° F) without de-rating High surge capacity starts more difficult loads and handles overload conditions reliably Simplified controls with a snap-on cover that protects settings from being accidentally changedy changedy changed
Applied in the field of industrial process controls, battery charging requirements, personal computers, telecommunications, graphics displays, plating and gold recovery industries and wherever required in the commercial, telecoms, mining or industrial markets. Commercial Solar, Recreational Vehicles, Mobile Office, Industrial Wind, Boats, Truck, & RV Residential Solar, Emergency Vehicles, Residential Wind, Fleet & Utility Vehicles, Camping & Outdoors, Renewable Newsletter,le Newsletter,e Newsletter,
Soft start capability for starting heavy loads
New power factor corrected (PFC) charging
Available in 1000 and 3000 watt models Utility grade, sine wave power
Durable construction for long life under extreme environmental conditions
70 AMP automatic three-stage battery charger (bulk, absorption, and float)
Battery equalization with remote temperature sensor for increased performance
Low idle current (less than 1 watt) conserves energy when no loads are present
Built-in starting control circuits for two- and three-wire generator starting systems
New digital display shows kilowatts (kW) when inverting and AMPS (A) when charging Better thermal performance allows full output power to 50° C (122° F) without de-rating High surge capacity starts more difficult loads and handles overload conditions reliably Simplified controls with a snap-on cover that protects settings from being accidentally changedy changedy changed
| MODEL | 115V Models | 230V Models | |
| OUTPUT | |||
| Power Levels crated at nominal inputs | 1KW;2KW;3KW;4KW | 1KW;2KW;3KW;4KW;5KW;6KW | |
| Output Voltage | 110V/115V/120V Selectable | 220V/230V/240V Selectable | |
| Voltage Waveform | Pure Sine wave | ||
| Crest Factor | 3:'1 | ||
| Output Frequency | Auto Select for 50/60Hz,47Hz ~55Hz for 50Hz nominal,56Hz ~ 65Hz for 60Hz nominal | ||
| (Synchronized to Mains) | |||
| Regulation (Nominal) | ±20% typical of nominal voltage voltage voltage | ||
| Regulation | ±3% of selected output voltage (adjustable with thewith thewith the | ||
| (Battery mode) | remote set-up software) | ||
| Transfer time | Blackout 3ms typical,Brownout 1ms typical,Battery mode to Normal mode:1ms typical | ||
| Over current protection | Over load alarm level 100% ~ 120% | ||
| Over load shutdown level 120% ~ 190% | |||
| (Adjustable by using the remote set-up software) | |||
| INPUT | |||
| Nominal Voltage | 110V/115V/120V Selectable | 220V/230V/240V Selectable | |
| Input Frequency | 47Hz ~ 65Hz, 50/60Hz auto-sensing | ||
| Efficiency (Normal mode) | 99% | ||
| Noise Filtering | Full time EMI/RFI filtering | ||
| Over current protection | Re-settable over current protector:1000W~4KW | AC Fuse1000VA/2000VA,Re-settable over current protector:1000W~6KW | |
| Voltage Range | 85V ~ 145V | 185V ~ 265V | |
| AVR Range (2 Bucks, 2 Boosts) | Enhanced Buck: +28% of selected nominal voltage | ||
| Buck mode: +10% of selected nominal voltage | |||
| Boost mode: -10% of selected nominal voltage | |||
| Enhanced Boost: -25% of selected nominal voltage | |||
| Surge Protection | 1KW/ 2KW:416 Joules | 1KW-3KW:430 Joules | |
| 3KW ~ 4KW:724 Joules | 4KW-6KW:826 Joules | ||
| BATTERY | |||
| Battery type | Lead-Acid 50Ah~500Ah (Recommended) | Lead-Acid 50Ah~500Ah (Recommended) | |
| DC Voltage | 1KW/2KW:12Vdc | 1KW/2KW/3KW:12Vdc | |
| 2KW/3KW:24Vdc | 2KW/3KW:24Vdc | ||
| 3KW/4KW:48Vdc | 3KW/4KW/5KW/6KW:48Vdc | ||
| Typical backup time | No Limit | ||
| Charging method | Smart pulse charging with two charging modes?EQuick charging when battery | ||
| is not fully charged, trickle charging when battery is 90% fully charged. | |||
| Maximum charging current | 1000W 12V:35A | 1000W 24V:35A | |
| 2000W 12V:65A | 2000W 24V:35A | ||
| 3000W 24V:45A | 4000W 48V:35A | ||
| 5000W 48V:40A | 6000W 48V:50A | ||
| Average charging | Quick charging mode:15.7V-54V maximum. | ||
| voltage for each battery | Trickle charging mode:13.5V -52V(adjustable with the remote set-up software) | ||
| Protection | Over current protection & Over charging voltage protection (SCR control)trol)trol) | ||
| Thermal protection (CPU control) | |||
| When temperature inside the unit is over 45°C ,charger will stop charging for 2 minutes followed by an 2 minutes charging. The cycle will be repeatepeatepeate | |||
| Monitoring | Smart monitoring & warning for failed battery or open-circuit battery.tery.tery. | ||
| Auto-detection each time when power on or every 6 days. | |||
| SOLAR CHARGER | |||
| Rating voltage | 12V / 24V / 48V | 12V / 24V / 48V | |
| DC input range | 12V model : 12 ~ 21Vdc;24V model : 24 ~ 42Vdc;48V model : 48 ~ 84Vdc | ||
| Charging method | Constant voltage with current limiting by PWM control | ||
| Charging voltage | 12V model:13.5Vdc;24V model: 27.0Vdc;48V model: 54.0Vdc | ||
| Power rating | 12V model : 1000W/2000W (13.5Vdc @ 37A) | ||
| 24V model : 1000W/2000W (27.0Vdc @ 37A) | |||
| 48V model : 3KW/5KW/6KW (54Vdc @ 18.5A) | |||
| Protection | DC input polarity protection, DC input short circuit protection( when battery is | ||
| connected), DC output over current protection | |||
| COMMUNICATIONS & MANAGEMENTEMENTEMENT | |||
| Standard Interface port | UPSilon2000 compatible; optional for RS232 . | ||
| Optional Interface part | RJ45 (Surge protection), DB9 | ||
| Control panel | LCD or LED Selectable | ||
| Audible alarm | Alarm on battery:Low battery & Battery over voltageltageltage | ||
| Alarm on abnormal operation:Over load, Short-circuit, & Over heat heat heat | |||
| Green mode function | 1% to 14% of full load (adjustable by using the remote set-up software) | ||
| (Auto-shut-off in blackout) | The default setting is OFF. | ||
| Cooling fan control | Auto on / off, controlled by temperature & operation mode mode mode | ||
| ENVORMENT AND SAFETY | |||
| Operating Temperature | Up to 1500 meters:0°C to 40°C (32°Fto 104°F)eg;Fto 104°F)g;F)eg;Fto 104°F) | ||
| Transit/storage Temp. | -15°C to 55(5°F to 131°F)to 131°F)g;F)to 131°F) | ||
| Relative Humidity | 5 - 95% non condensing | ||
| Operating Altitude | 0 ~ 3000 meters | ||
| Quality control system | ISO 9001:2000, ISO 14002-2004 | ||
| PHYSICAL | |||
| Appearance | Size(mm)LxWxH | 570*315*300 | |
| Weight(Kg) | 1000W/18.2kg ;2000W/19.5kg ;3000W/23.5kg | ||
| Size(mm)LxWxH | 755*319*288 | ||
| Weight(Kg) | 4000W/35kg ;5000W/38kg ;6000W/40kg | ||
