2015 New Low Frequency Built in MPPT Solar Controler 1-6kw Solar Power Inverter
2015新款低频内置MPPT太阳能控制器1-6kw太阳能逆变器
议价
加入意向| 型号。 | PV3000系列 |
| 相 | 单 |
| 证明 | ce，iso9001 |
| 类型 | 直流/交流逆变器 |
| 电路拓扑 | 推拉型 |
| 输入电压 | 155-265vac |
| 容量 | 1000-6000W |
| 充电电流 | 40 amp/60amp |
| 充电器 | MPPT型控制器 |
| 商标 | 必须或oem品牌 |
| 规范 | iso9001，ce，soncap |
| HS编码 | 8504403090 |
| 源流的性质 | 主动变频器 |
| 输出功率 | >1000W |
| 牌 | 必须或OEM |
| 能量源 | 太阳能发电，电力 |
| 波弦的性质 | 正弦波逆变器 |
| 输出波 | 纯正弦波 |
| 变压器 | 纯铜变压器 |
| 出生国家 | 中国 |
| 应用 | 家用应用，空调 |
| 运输包装 | 纸板箱 |
| 起源 | 中国 |
它是一种电子系统，以允许模块产生所有能量的功率的方式操作光伏（PV）模块。太阳能配电充电控制器是一种基于微处理器的系统，旨在实现MPPT。与传统的充电控制器相比，它可以增加充电电流达30％以上。
AC或电池优先级1.默认情况下，我们的变频器设计为交流优先。这意味着，当交流输入存在时，电池将首先充电。
2.当您选择电池优先（7-9电池类型选择器）时，尽管交流输入，变频器也将从电池反转。只有当电池电压达到低电压报警点时，变频器才会转换到交流输入，给电池充电，并在电池充满电的时候切换回电池。此功能主要用于风/太阳能系统，使用公用电力作为备用。
AC或电池优先级1.默认情况下，我们的变频器设计为交流优先。这意味着，当交流输入存在时，电池将首先充电。
2.当您选择电池优先（7-9电池类型选择器）时，尽管交流输入，变频器也将从电池反转。只有当电池电压达到低电压报警点时，变频器才会转换到交流输入，给电池充电，并在电池充满电的时候切换回电池。此功能主要用于风/太阳能系统，使用公用电力作为备用。
| 混合变频器 | ||
| MPPT太阳能控制器功能 | ||
| 额定电压 | 12 / 24v直流 | |
| 额定充电电流 | 40A | |
| 负载电流 | 15A | |
| 输入电压范围 | 15-55v直流 | |
| 最大。 PV开路阵列电压 | 55v直流 | |
| 典型的空闲消费 | 闲置< 10mA10mA | |
| 过载保护（直流负载） | 2.0 * Inom> 5s 1.5 * Inom> 20s 1.25 * Inom temperature controlledtrolled | |
| 批量充电 | 14.6V（默认） | 29.2V（默认） |
| 浮动充电 | 13.4V（默认） | 26.8V（默认） |
| 均衡收费 | 14.0V（默认） | 28.0V（默认） |
| 过充电断开 | 14.8V | 29.6V |
| 过充电恢复 | 13.6V | 27.2V |
| 过放电断开 | 10.8V（默认） | 21.6V（默认） |
| 过放电重连 | 12.3V | 24.6V |
| 温度补偿 | 13.2mv / C | 26.4mv / C |
| 铅酸电池设置 | 可调整的 | |
| NiCad电池设置 | 可调整的 | |
| 负载控制模式 | 1.低电压重新连接（LVR）：可调2.低电压断开（LVD）：自动断开3.重新连接：在断开和重新连接之前包括警告闪光 | |
| 低电压重新连接 | 12.0-14.0Vdc | 24.0-28.0Vdc |
| 低电压断开 | 10.5-12.5Vdc | 21.0-25.0Vdc |
| 环境温度 | 0-40°C（满载）40-60°C（降额）电子评级）e-rating) | |
| 高度 | 操作5000m，非操作16000m | |
| 防护等级 | IP21 | |
| 电池温度传感器 | BTS可选远程电池温度传感器，用于提高充电精度 | |
| 端子尺寸（细/单线） | ＃8 awg | |
| 太阳能逆变电池优先 | |||||||
| 模型 | 1000w | 1500w | 2000w | 3000w | |||
| 输入电压波形 | 正弦（效用或发电机） | ||||||
| 标称输入电压 | 230V交流 | ||||||
| 低线断开 | 155Vac±4％lusmn; 4％lusmn;4% | ||||||
| 高线断开 | 265VAC±4％lusmn; 4％lusmn;4% | ||||||
| 最大交流输入电压 | 270Vrms | ||||||
| 标称输入频率 | 50Hz / 60Hz（自动检测） | ||||||
| 过载保护 | 断路器 | ||||||
| 输出短路保护 | 断路器 | ||||||
| 效率（线路模式） | >95% | ||||||
| 转换开关额定值 | 30A | ||||||
| 转移时间（Ac到Dc） | 20ms（典型） | ||||||
| 输出电压波形 | 正弦波 | ||||||
| 额定输出功率（W） | 1000W | 1500W | 1500W | 2000W | 2000W | 3000W | 3000W |
| 功率因数 | 1 | ||||||
| 标称输出电压（V） | 230V交流 | ||||||
| 输出电压调节 | ±10％rms; 10％rms;10% rms | ||||||
| 名义效率 | >80% | ||||||
| 标称直流输入电压 | 12V | 12V | 24V | 12V | 24V | 12V | 24V |
| 标称充电电流 | 35A | 45A | 35A | 65A | 35A | 75A | 45A |
| 充电电流调节 | ±5Ausmn; 5Ausmn; 5A | ||||||
| 电池初始电压 | 0 -15.7 Vdc /31.4Vdc（可用0V电池工作） | ||||||
| 通讯： | RJ11（用于工厂测试，没有客户界面可用） | ||||||
| 安全认证 | CE（EN60950） | ||||||
| EMI分类 | en50091-2，class a | ||||||
| 工作温度范围 | 0°C至40°C 40°Ceg;C 40°C | ||||||
| 储存温度 | -15℃〜60℃〜60℃rdm;C~ 60ºC | ||||||
| 工作湿度 | 5％至95％ | ||||||
| 声音噪音 | 最大60dB | ||||||
| 冷却 | 强制空气，变速风扇 | ||||||
| Model NO. | PV3000 Series |
| Phase | Single |
| Certification | CE, ISO9001 |
| Type | DC/AC Inverters |
| Circuit Topologies | Push-pull Type |
| Input Voltage | 155-265VAC |
| Capacity | 1000-6000W |
| Charge Current | 40AMP/60AMP |
| Charger | MPPT Type Controler |
| Trademark | MUST Or OEM brand |
| Specification | ISO9001, CE, SONCAP |
| HS Code | 8504403090 |
| Nature of Source Flow | Active Inverter |
| Output Power | >1000W |
| Brand | Must or OEM |
| Power Source | Solar Power, Electric Power |
| Nature of Wave String | Sine Wave Inverter |
| Output Wave | Pure Sine Wave |
| Transformer | Pure Copper Transformer |
| Country of Origin | China |
| Application | Home Application, Air Conditioner |
| Transport Package | Carton |
| Origin | China |
1. It is an electronic system that operates the photovoltaic(PV) modules in a manner that allows the modules to produce all the power they are capable of. The solar mate charge controller is a microprocessor-based system designed to implement the MPPT. It can increase charge current up to 30% or more compared to traditional charge controllers.
AC or Battery Priority 1. Our inverter is designed AC priority by default. This means, when AC input is present, the battery will be charged first.
2. When you choose battery priority(Battery type selector on 7-9), then inverter will invert from battery despite the AC input. Only when the battery voltage reaches low voltage alarm point will be inverter transfer to AC input, charge battery and switch back to battery when the battery is fully charged. This function is mainly for wind/'solar systems using utility power as back up.
AC or Battery Priority 1. Our inverter is designed AC priority by default. This means, when AC input is present, the battery will be charged first.
2. When you choose battery priority(Battery type selector on 7-9), then inverter will invert from battery despite the AC input. Only when the battery voltage reaches low voltage alarm point will be inverter transfer to AC input, charge battery and switch back to battery when the battery is fully charged. This function is mainly for wind/'solar systems using utility power as back up.
| Hybrid Inverter | ||
| MPPT solar controller function | ||
| Rated Voltage | 12/24V DC | |
| Rated Charge current | 40A | |
| Load current | 15A | |
| Input voltage range | 15-55V DC | |
| Max. PV open circuit array voltage | 55V DC | |
| Typical idle consumption | At idle< 10mA10mA | |
| Overload protection(DC load) | 2.0 * Inom﹥5s 1.5 * Inom﹥20s 1.25 * Inom temperature controlledtrolled | |
| Bulk charge | 14.6V(default) | 29.2V(default) |
| Floating charge | 13.4V(default) | 26.8V(default) |
| Equalization charge | 14.0V(default) | 28.0V(default ) |
| Over charge disconnection | 14.8V | 29.6V |
| Over charge recovery | 13.6V | 27.2V |
| Over discharge disconnection | 10.8V(default) | 21.6V(default ) |
| Over discharge reconnection | 12.3V | 24.6V |
| Temperature compensation | 13.2mV/C | 26.4mV/C |
| Lead acid battery settings | Adjustable | |
| NiCad battery settings | Adjustable | |
| Load control mode | 1.Low Voltage Reconnect(LVR):Adjustable 2.Low Voltage Disconnect(LVD):Automatic disconnection 3.Reconnection:Includes warning flash before disconnect and reconnection | |
| Low voltage reconnect | 12.0-14.0Vdc | 24.0-28.0Vdc |
| low voltage disconnet | 10.5-12.5Vdc | 21.0-25.0Vdc |
| Ambient temperature | 0-40 °C (full load) 40-60 °C (de-rating)e-rating)e-rating) | |
| Altitude | Operating5000m,Non-Operating 16000m | |
| Protection class | IP21 | |
| Battery temperature sensor | BTS-optional remote battery temperature sensor for increased charging precision | |
| Terminal size(fine/single wire) | #8 AWG | |
| Solar inverter battery priority | |||||||
| MODEL | 1000w | 1500w | 2000w | 3000w | |||
| Input Voltage Waveform | Sinusoidal (utility or generator) | ||||||
| Nominal Input Voltage | 230Vac | ||||||
| Low Line Disconnect | 155Vac±4%lusmn;4%lusmn;4% | ||||||
| High Line Disconnect | 265Vac±4%lusmn;4%lusmn;4% | ||||||
| Max AC Input Voltage | 270Vrms | ||||||
| Nominal Input Frequency | 50Hz/ 60Hz (Auto detection) | ||||||
| Over-Load Protection | Circuit breaker | ||||||
| Output Short Circuit Protection | Circuit breaker | ||||||
| Efficiency (Line Mode) | >95% | ||||||
| Transfer Switch Rating | 30A | ||||||
| Transfer Time(Ac to Dc) | 20ms (typical) | ||||||
| Output Voltage Waveform | Sine wave | ||||||
| Rated Output Power (W) | 1000W | 1500W | 1500W | 2000W | 2000W | 3000W | 3000W |
| Power Factor | 1 | ||||||
| Nominal Output Voltage (V) | 230Vac | ||||||
| Output Voltage Regulation | ±10% rms;10% rms;10% rms | ||||||
| Nominal Efficiency | >80% | ||||||
| Nominal DC Input Voltage | 12V | 12V | 24V | 12V | 24V | 12V | 24V |
| Nominal Charge Current | 35A | 45A | 35A | 65A | 35A | 75A | 45A |
| Charge Current Regulation | ± 5Ausmn; 5Ausmn; 5A | ||||||
| Battery initial voltage | 0 -15.7 Vdc /31.4Vdc(can operate with 0V battery) | ||||||
| Communication: | RJ11 (Used for factory testing. No customer interface available) | ||||||
| Safety Certification | CE(EN60950) | ||||||
| EMI Classification | EN50091-2, CLASS A | ||||||
| Operating Temperature Range | 0°C to 40°C 40°Ceg;C 40°C | ||||||
| Storage temperature | -15ºC ~ 60ºC~ 60ºCrdm;C~ 60ºC | ||||||
| Operation humidity | 5% to 95% | ||||||
| Audible Noise | 60dB max | ||||||
| Cooling | Forced air, variable speed fan | ||||||
