摊铺机轨道规格：
宽度483 *间距152.4 * Link52
颜色：黑色
保修期：12个月正常使用
特征：
橡胶履带的安装
A.强度过小：容易引起跳跃的牙齿，骑马或引导轮和支撑轮的转向故障，并导致轨道脱轨或逃逸。
B.强度过大：履带钢丝在拉伸过程中会由于过大的应变拉伸而变形，这样会使桨距发生变化，并跟踪铁芯和驱动轮异常磨损，也会使齿轮接触和轨道断裂，机器功率损耗较大，轨道磨损加剧，带裂纹更容易，轨道寿命更短。轨道紧张后，最大下垂距离为10-15mm，正如下方所示。
2.注意
为了延长橡胶履带的使用寿命，请完成以下工作：
A.不要急于在混凝土地板，砂石路或硬道路上紧急转动，以免加速橡胶履带的磨损，扭曲和破裂。
B.尽量不要在腐烂的地方工作，避免橡胶履带滑动和磨损。
C.当石块或其他物体进入履带和底盘时，立即停止，并清除砾石或障碍物。
警告
A.不要在充满石块，棘石，废铁等物体的路上行驶。
B.不要在河流，河流，海岸或任何坚固的道路上行驶。
C.不要使轨道无效登陆。
D.禁止积极驾驶。
避免快速转弯，请慢下来，逐渐转身。
参数：

Specification of the paver track :
Width 483*Pitch 152.4*Link52
Color:Black
Warranty:12 months under normal use
Features:
1. Installation of the Rubber Tracks
A. Too small strength: Easily causes jumping teeth, riding a tooth or steering failure of the guide wheels and supporting wheels and leads to track derailment or escapes.
B. Too large strength: Track wire will be deformed at the elongation by the excessive strain tensile, which will make the pitch changed, and track core iron and the drive wheels abnormally worn, also will make teeth touched and the track broken, the machine power loss larger, track wear exacerbated, belt crack easier as well as the track life shorter. After the track is strained, the maximum sag distance is 10-15mm, just as the pitch below.
2. Attention
In order to extend the life of rubber tracks, please complete the following work:
A. Never turn urgently on the concrete floor, gravel road, or hard and sharp road, in order to avoid speeding up the wearing, twisting and chapping of the rubber track.
B. Try not to work in the rotten field, to avoid rubber track skid and wear.
C. When the stones or other objects come into the crawler and chassis, stop immediately, and clear gravels or obstacles.
3. Warns
A. Do not travel on the road full of footstone, spinous-stone, scrap iron and other objects.
B. Do not drive in the rivers, streams and on the seacast or any rugged road.
C. Do not make the track unilaterial landing.
D. Forbid aggressive driving.
E. Avoid making a turn rapidly, please slow down and make a turn gradually.
Parameters: