50A Solar Power Controller for PV Panel Charging
50A太阳能电源控制器
| 型号。 | SNC-051 |
| 证明 | iso，ce |
| 额定电压 | 12V / 24V，24V / 48V自动识别; |
| 控制模式 | PWM |
| 商标 | OEM或中性 |
| 规范 | CE; ISO9001 |
| HS编码 | 8537109090 |
| 条件 | 新 |
| 应用 | 太阳能系统控制器，充电器控制器，照明控制器，电压控制器 |
| 额定充电电流 | 50A |
| 公司 | 生产厂家 |
| 运输包装 | 标准出口包装 |
| 起源 | 广东佛山 |
产品介绍
该太阳能充电控制器专为太阳能发电系统和太阳能直流路灯而设计。采用智能充电控制器专用电脑芯片。使用一键式轻触开关完成所有操作和安装;具有全球保护措施的短路保护，过载保护，独特的防反接连接保护，充满电和过放电时自动切断，恢复。详细的充电指示灯，电池状态，负载和各种故障指示灯。
该太阳能充电控制器通过计算机芯片对电池端子电压，放电电流，环境温度进行采样，涉及电池容量。通过特殊控制模式计算，满足电池特征放电率，适应高效率的PWM电池充电模式，确保电池工作时的最佳状态，延长电池使用寿命。还具有各种工作模式，输出模式可选择满足客户要求。
主要特点：
+优异的性能，因为MCU控制和智能优化的SOC设计;
+通过LCD显示操作参数和状态;
+独立三级充电管理，可提高电池充电效率，使电池寿命更长;
+系统电压自动识别（12 / 24V，24 / 48V），方便实用;
+可设定的光控或时间控制负载输出，灵活;
+全自动控制，如电子短路保护，过放电保护，过载保护和独特的预留连接预防;
+查询实时记录和发电量和功耗的历史记录;
+时钟显示功能
技术参数
任何要求，欢迎联系
刘小姐：
电话：+86 757 81816131;
手机+86 18039293535.
该太阳能充电控制器专为太阳能发电系统和太阳能直流路灯而设计。采用智能充电控制器专用电脑芯片。使用一键式轻触开关完成所有操作和安装;具有全球保护措施的短路保护，过载保护，独特的防反接连接保护，充满电和过放电时自动切断，恢复。详细的充电指示灯，电池状态，负载和各种故障指示灯。
该太阳能充电控制器通过计算机芯片对电池端子电压，放电电流，环境温度进行采样，涉及电池容量。通过特殊控制模式计算，满足电池特征放电率，适应高效率的PWM电池充电模式，确保电池工作时的最佳状态，延长电池使用寿命。还具有各种工作模式，输出模式可选择满足客户要求。
主要特点：
+优异的性能，因为MCU控制和智能优化的SOC设计;
+通过LCD显示操作参数和状态;
+独立三级充电管理，可提高电池充电效率，使电池寿命更长;
+系统电压自动识别（12 / 24V，24 / 48V），方便实用;
+可设定的光控或时间控制负载输出，灵活;
+全自动控制，如电子短路保护，过放电保护，过载保护和独特的预留连接预防;
+查询实时记录和发电量和功耗的历史记录;
+时钟显示功能
技术参数
| 类型 | SNC-050 | |
额定充电电流 | 50A | |
额定负载电流 | 10A | |
系统电压 | 48VDC | |
太阳能投入 | <50, 2/48V DCV DC | |
960wp，2 / 48v | ||
，过载，短路保护 | 过载保护：1.25倍额定电流60s，1.5倍额定电流5s;短路保护：≥3倍额定电流rent | |
空载损耗 | ≤15mA5 mA5 mA | |
充电回路下降 | ≤0.26v.26v.26V | |
放电回路下降 | ≤0.15v.15v.15V | |
过电压保护 | 24V | |
工作温度 | 技术等级：-35ºC〜+55ºC; +55ºC;dm;C;+55ºC; | |
升压电压 | 58.4v（保持时间：30min）（仅用于过放电） | |
直接充电电压 | 57.6v（保持时间：30分钟） | |
浮动充电 | 54.4v（：保持时间：直到下降到充电返回电压运动） | |
充电回路电压 | 52.8v; ×2 / 24V ;; 2 / 24V;;2/24V; | |
温度补偿 | -5mv /ºC/ 2V（,,,提升，直接，浮动，充电返回电压补偿））;tion); | |
欠电压 | / | |
| 过放电电压 | / | |
过放电返回电压 | / | |
控制模式 | PWM | |
任何要求，欢迎联系
刘小姐：
电话：+86 757 81816131;
手机+86 18039293535.
| Model NO. | SNC-051 |
| Certification | ISO, CE |
| Rated Voltage | 12V/24V, 24V/48V Automatic Identification; |
| Control Mode | PWM |
| Trademark | OEM or Neutral |
| Specification | CE; ISO9001 |
| HS Code | 8537109090 |
| Condition | New |
| Application | Solar System Controller, Charger Controller, Lighting Controller, Voltage Controller |
| Rated Charge Current | 50A |
| Company | Manufacturer |
| Transport Package | Standard Export Package |
| Origin | Foshan Guangdong |
Product Introduction
This solar charge controller is designed specially for solar power system and solar DC street lamp. Adopting dedicated computer chips for intelligent charge controller. Using one-click light touch switch to complete all operation and install; Having global protective measure of short circuit protection, overload protection, unique anti inversed connection protective, auto cut off when full of charge and overdischarge,recover. Detailed charging indicator, battery status, loads and all kinds of failure indicator.
This solar charge controller conduct sampling to battery terminal voltage, discharge current, environment temperature which involve battery capacity by computer chips. Calculate by special control model to meet battery charactistic discharge rate and adapt high efficiency PWM battery charge mode to ensure the best status when battery work and prolong battery service life. Also having various of work mode, output mode for choice to meet customers requirements.
MAIN FEATURES:
+Excellent performance because of MCU control and intelligent optimized SOC design;
+Visualization of operation parameters and statuses via the LCD;
+Independent three-stage charge management, which can improve charge efficiency of the batteries and make lives of the batteries longer;
+Automatic identification of the system voltage (12/24V, 24/48V), which is convenient and practical;
+Settable light-operated or time-controlled load output, which is flexible;
+Full automatic control such as electronic short circuit protection, overdischarge protection, overload protection and unique reserve connection prevention;
+Queries of real-time records and historical records of power generation capacity and power consumption;
+Function of clock display
Technology Parameter
Any requirements, welcome to contact with
Sabrina Liu:
Tel: +86 757 81816131;
Mobile +86 18039293535.,
This solar charge controller is designed specially for solar power system and solar DC street lamp. Adopting dedicated computer chips for intelligent charge controller. Using one-click light touch switch to complete all operation and install; Having global protective measure of short circuit protection, overload protection, unique anti inversed connection protective, auto cut off when full of charge and overdischarge,recover. Detailed charging indicator, battery status, loads and all kinds of failure indicator.
This solar charge controller conduct sampling to battery terminal voltage, discharge current, environment temperature which involve battery capacity by computer chips. Calculate by special control model to meet battery charactistic discharge rate and adapt high efficiency PWM battery charge mode to ensure the best status when battery work and prolong battery service life. Also having various of work mode, output mode for choice to meet customers requirements.
MAIN FEATURES:
+Excellent performance because of MCU control and intelligent optimized SOC design;
+Visualization of operation parameters and statuses via the LCD;
+Independent three-stage charge management, which can improve charge efficiency of the batteries and make lives of the batteries longer;
+Automatic identification of the system voltage (12/24V, 24/48V), which is convenient and practical;
+Settable light-operated or time-controlled load output, which is flexible;
+Full automatic control such as electronic short circuit protection, overdischarge protection, overload protection and unique reserve connection prevention;
+Queries of real-time records and historical records of power generation capacity and power consumption;
+Function of clock display
Technology Parameter
| Type | SNC-050 | |
Rated charge current | 50A | |
Rated load current | 10A | |
System voltage | 48VDC | |
Solar input | <50, 2/48V DCV DC | |
960Wp, 2/48V | ||
,Overload, short circuit protective | Overload protection: 1.25 times rated current 60s, 1.5 times rated current 5s; Short circuit protection: ≥3 times rated currentrentrent | |
No-load loss | ≤15 mA5 mA5 mA | |
Charge loop drop | ≤0.26V.26V.26V | |
Discharge loop drop | ≤0.15V.15V.15V | |
Over-voltage Protection | 24V | |
Working temperature | Technical grade:-35ºC~+55ºC;+55ºC;dm;C;+55ºC; | |
Boost voltage | 58.4v (maintain time:30min)(only be used for overdischarge) | |
Direct charge voltage | 57.6v (maintain time:30min) | |
Float charge | 54.4v (:Maintain time: until drop to charge return voltage motion) | |
Charge return voltage | 52.8v ; ×2/24V;;2/24V;;2/24V; | |
Temperature compensation | -5mv/ºC/2V(,,,lifting,direct, floating, charging return voltage compensation);tion);tion); | |
Undervoltage voltage | / | |
| Overdischarge voltage | / | |
Overdischarge return voltage | / | |
Control mode | PWM | |
Any requirements, welcome to contact with
Sabrina Liu:
Tel: +86 757 81816131;
Mobile +86 18039293535.,
