DC 24V 1A Mini UPS for Network Equipment
DC 24V 1A用于网络设备的迷你UPS
| 型号。 | sk313 / 616 |
| 类型 | 支持 |
| 应用 | 通讯 |
| 待机时间 | 标准机 |
| 输出容量 | 小型 |
| 牌 | STCB |
| 输出电压 | 5V / 9V / 12V / 15V / 24VDC |
| 输出电流 | 5v / 9v / 12v 2a; 15v / 24v 1a |
| 容量 | 2000mAh的* 3/6 |
| 重量 | 0.31公斤/0.455公斤 |
| 备份时间 | 3-10小时 |
| 规范 | ce，fcc，rohs |
| HS编码 | 8504402000 |
| 相 | 单相 |
| 保护 | 过压保护 |
| 分类 | 直流照明/电源 |
| 待机UPS | 直流电源UPS |
| 设备模式 | 集中模式 |
| 输入电压范围 | 100-240VAC |
| 输出功率 | 24W |
| 电池类型 | 锂电池 |
| 尺寸（mm） | 159*112*32 |
| Warrenty | 12个月 |
| 商标 | STCB |
| 起源 | 广州深圳 |
DC 24v 1A mini网络设备
主要特点：
该系统配有微处理器智能控制系统和特殊控制算法，是外部供电，家庭使用，偏远地区露营和电力短缺区域供电的小型直流电力系统等。
2. 该电路使用高性能，高精度10位ADC MCU作为主机，具有电池过充，过放，过载和短路保护，具有独特的电子防反相保护，低功耗待机，USB输出，光输出过载保护，充电，放电分离功能。
3. 这个 单元 是 a 纯直流输出系统，一个USB 5V/2A 输出端口， 一个DC 5V / 2A输出端口，一个DC 9V / 2A输出端口，一个DC 12V / 2A输出端口，一个DC 15V / 1A输出端口和一个DC 24V / 1A输出端口 .
该系统配有微处理器智能控制系统和特殊控制算法，是外部供电，家庭使用，偏远地区露营和电力短缺区域供电的小型直流电力系统等。
2. 该电路使用高性能，高精度10位ADC MCU作为主机，具有电池过充，过放，过载和短路保护，具有独特的电子防反相保护，低功耗待机，USB输出，光输出过载保护，充电，放电分离功能。
3. 这个 单元 是 a 纯直流输出系统，一个USB 5V/2A 输出端口， 一个DC 5V / 2A输出端口，一个DC 9V / 2A输出端口，一个DC 12V / 2A输出端口，一个DC 15V / 1A输出端口和一个DC 24V / 1A输出端口 .
产品描述：
1.使用SCM作为主机，实现智能控制，过充，过放保护，短路保护的电池充放电，当负载过载时，系统会自动关闭，几秒钟后自动恢复正常秒，有效延长电池寿命，电池过充电和升压控制。
超级 低功耗待机功能：当ON / OFF开关处于OFF状态时，产品进入低功率状态。
3. USB输出：当手机/ MP3 / MP4 /数码相机充电时，输出电流达到5V2A以上。
4.充放电独立功能：充放电不间断，充电时可实现放电。
5.充放电指示功能：监控系统充放电状态随时充电，充电指示灯变红，放电时工作指示灯变绿，工作指示灯亮时，工作指示灯变红。
6.当本机由太阳能或适配器充电时，请关闭ON / OFF开关，不要打开任何负载，以减少充电时间。
7.本产品具有过充电和短路保护功能（电池保护，需要充电启动），当电压不足时，指示灯变红。
规范：
| 模型 | sk- 313 | sk- 616 |
| 输出电压（可选） | 5v / 9v / 12v / 15v / 24v直流 | |
| 输出功率 | 24W | |
| 电池类型 | 锂电池 | |
| 数量。电池容量ttery | 2000mAh的* 3 | 2000mAh的6 * |
| 额定充电电流 | 1A | |
| 额定放电电流 | 5v / 9v / 12v，2a; 15v / 24v，1a | |
| 系统电压 | 11.1V | |
| 过压保护 | 12.6V | |
| 欠电压 | 11.4V | |
| 过放电电压 | 10.5V | |
| 保护电路 | 过充保护（系统保护） | |
| 过载和短路保护（电池保护） | ||
| 工作温度 | -10℃+ 55℃; C + 55℃dm;C;C+55ºC | |
| 净重/公斤） | 0.31 | 0.455 |
| 单位尺寸（mm） | 159*112*32 | |
公司及厂房：
项目和展览会
| Model NO. | SK313/616 |
| Type | Standby |
| Application | Communication |
| Standby Time | Standard Machine |
| Output Capacity | Small Type |
| Brand | Stcb |
| Output Voltage | 5V/9V/12V/15V/24VDC |
| Output Current | 5V/9V/12V 2A;15V/24V 1A |
| Capacity | 2000mAh*3/6 |
| Weight | 0.31kg/0.455kg |
| Backup Time | 3-10 Hours |
| Specification | CE, FCC, ROHS |
| HS Code | 8504402000 |
| Phase | Single Phase |
| Protection | Overvoltage |
| Classification | DC Lighting/Power |
| Standby UPS | DC Power Supply UPS |
| Equipment Mode | Centralized Model |
| Input Voltage Range | 100-240VAC |
| Output Power | 24W |
| Battery Type | Lithium Battery |
| Dimension(mm) | 159*112*32 |
| Warrenty | 12 Months |
| Trademark | STCB |
| Origin | Guangzhou Shenzhen |
DC 24v 1A mini ups for network equipment
Main Features:
1. This system is equipped with intelligent control system of microprocessor and special control algorithm, which is small DC power system designed for power supplying of outwork, home use, camping in remote area and power shortage region, and so on.
2. The circuit uses a highperformance, highprecision 10bit ADC MCU as the master, with battery overcharge, over discharge, overload and short circuit protection with unique electronic antireverse protection, lowpower standby, USB output, light output overload protection, charging, discharging separate functions.
3. This unit is a pure DC output system, one USB 5V/2A output port, one DC 5V/2A output port, one DC 9V/2A output port, one DC 12V/2A output port, one DC 15V/1A output port, and one DC 24V/1A output port .
1. This system is equipped with intelligent control system of microprocessor and special control algorithm, which is small DC power system designed for power supplying of outwork, home use, camping in remote area and power shortage region, and so on.
2. The circuit uses a highperformance, highprecision 10bit ADC MCU as the master, with battery overcharge, over discharge, overload and short circuit protection with unique electronic antireverse protection, lowpower standby, USB output, light output overload protection, charging, discharging separate functions.
3. This unit is a pure DC output system, one USB 5V/2A output port, one DC 5V/2A output port, one DC 9V/2A output port, one DC 12V/2A output port, one DC 15V/1A output port, and one DC 24V/1A output port .
Product description:
1. Using SCM as the master, to achieve a battery charge and discharge of the intelligent control, overcharge, over discharge protection, short circuit protection, when the load is overloaded, the system will automatically shut down, automatically return to normal after a few seconds, effectively extending the battery life, battery over-ischarge and voltage rise control.
2. Ultra low power standby function: When ON / OFF switch is in the OFF state, the product enters a low power state.
3. USB Output: When charging mobile phone/MP3/MP4/digital camera, the output current reach above 5V2A.
4.Charge and discharge independent function: charging, discharging without disturbing each other, can realized discharged while charging.
5. Charge and discharge indicate function: monitoring system charge and discharge status at any time, when it charging, the charging indicator turns red, when it discharging, the working indicator turns green, when it under voltage , the working indicator turns red.
6. When this unit charge by solar or adapter, please turn off the ON / OFF switch, don't turn on any load in order to reduce the charging time.
7. This product has overcharging and short circuit protection function(battery protection, it need be activated by charging), when it undervoltage, indicator light turns red.
Specification:
| Model | SK- 313 | SK- 616 |
| Output Voltage (Optional) | 5V/9V/12V/15V/24V DC | |
| Output Power | 24W | |
| Battery Type | Lithium battery | |
| QTY. & Capacity Of Batterytteryttery | 2000mAH*3 | 2000mAH*6 |
| Rated charge current | 1A | |
| Rated discharge current | 5V/9V/12V, 2A;15v/24V, 1A | |
| System voltage | 11.1V | |
| Over pressure protection | 12.6V | |
| Under voltage | 11.4V | |
| Over- discharge voltage | 10.5V | |
| Protection circuit | Overcharge protection(system protection) | |
| Overload and short circuit protection(battery protection) | ||
| Operating temperature | -10ºC+55ºC;C+55ºCdm;C;C+55ºC | |
| Net Weight(kg) | 0.31 | 0.455 |
| Unit Dimension(mm) | 159*112*32 | |
Company and Factory:
Project and Tradeshow:
