Tnsja-II100kVA Industrial Oil-Immersed Induction (contactless) Voltage Regulator/Stabilizer
Tnsja-II100kVA工业油浸感应（非接触式）电压调节器/稳定器
议价
加入意向| 型号。 | TNSJA-100KVA（第二代技术） |
| 相 | 三阶段 |
| 用法 | 三相四线制 |
| 铁芯形状 | 油浸AVR |
| 牌 | Conpo |
| 规范 | 100KVA / 3相，油浸感应AVR |
| HS编码 | 8504401990 |
| 当前类型 | AC |
| 频率特性 | 低频 |
| 频率 | 50Hz / 60Hz的 |
| 应用范围 | 用于净电压澄清的地区 |
| 商标 | conpo |
| 起源 | 中国南京 |
1.Summary :
tnsja-ⅱ 系列 2ND 一代工业浸油感应（无刷/无级）电压稳定器 由电压调节器和变压器SSTS（包括油箱，定子，转子顶盖，驱动控制电机M，手轮，控制电路板和电压调节二次电路组成，通过电动机驱动实现旋转电压调节或手轮和齿轮联轴器在1800的旋转范围内。此外，它在油箱上端设有电气SS极限和机械极限，对于电气SS限制，电机的电源由一个限位开关和机械极限，旋转极限由螺栓保护器停止，定子绕组和转子绕组由基座固定，并放入带有10＃变压器油的油箱中，当负载发热时，散热通过油浸冷却的方式从散热管，油浸式电压稳定器具有相位故障，相位损耗，过压和过流保护的功能，其主要电路具有非接触式电压调节特性，无机械磨损，无火花，无干扰，故障率低。此外，该稳压器具有抗冲击性强，超强瞬时过载能力强，使用寿命长，维护方便等优点
2.应用：
该系列产品广泛应用于工业，交通，国防，铁路，大型机床，金属加工设备，生产线，空调，广播电视，建筑照明设备等需要稳定电压的设备，非常适合需要高可靠，高稳定电源的设备，或波动电压网幅度高的设备。
特点 s:
1). 无级调压（无刷）
通过感应和非接触式电压调节，稳压器可以线性地增加和减小负载电压。
2). 优秀的功能
通过使用日本制造的高磁感应硅钢片，该电压稳压器可以最大限度地减少空载损耗和空载电流，并最大限度地降低功耗。
3). 坚固耐用，使用寿命长
该稳压器的内部体是感应电压调节器IVR，不含碳刷，其主要特点是永久性耐磨，使用寿命长。
4). 效率高，功耗低
效率：> 98％，功耗 ≤≤le;≤ 1%
4.规格 s:
包装细节：
tnsja-ⅱ 系列 2ND 一代工业浸油感应（无刷/无级）电压稳定器 由电压调节器和变压器SSTS（包括油箱，定子，转子顶盖，驱动控制电机M，手轮，控制电路板和电压调节二次电路组成，通过电动机驱动实现旋转电压调节或手轮和齿轮联轴器在1800的旋转范围内。此外，它在油箱上端设有电气SS极限和机械极限，对于电气SS限制，电机的电源由一个限位开关和机械极限，旋转极限由螺栓保护器停止，定子绕组和转子绕组由基座固定，并放入带有10＃变压器油的油箱中，当负载发热时，散热通过油浸冷却的方式从散热管，油浸式电压稳定器具有相位故障，相位损耗，过压和过流保护的功能，其主要电路具有非接触式电压调节特性，无机械磨损，无火花，无干扰，故障率低。此外，该稳压器具有抗冲击性强，超强瞬时过载能力强，使用寿命长，维护方便等优点
2.应用：
该系列产品广泛应用于工业，交通，国防，铁路，大型机床，金属加工设备，生产线，空调，广播电视，建筑照明设备等需要稳定电压的设备，非常适合需要高可靠，高稳定电源的设备，或波动电压网幅度高的设备。
特点 s:
1). 无级调压（无刷）
通过感应和非接触式电压调节，稳压器可以线性地增加和减小负载电压。
2). 优秀的功能
通过使用日本制造的高磁感应硅钢片，该电压稳压器可以最大限度地减少空载损耗和空载电流，并最大限度地降低功耗。
3). 坚固耐用，使用寿命长
该稳压器的内部体是感应电压调节器IVR，不含碳刷，其主要特点是永久性耐磨，使用寿命长。
4). 效率高，功耗低
效率：> 98％，功耗 ≤≤le;≤ 1%
4.规格 s:
| tnsja-ⅱ 系列 2ND 一代工业油浸感应（无刷/无级）电压调节器 | |
| 输入电压 | 380V +/- 15％（其他输入电压范围，如20％等，请在订购时注明） |
| 输出电压 | 380VAC（可调） |
| 输出电压精度 | +/- 1〜5％可调 （出厂设定值：+/- 2％） |
| 频率 | 50Hz / 60Hz的 |
| 功率因数 | 0.8 |
| 响应时间 | <0.5s |
| 效率 | >95% |
| Dielectric 强度 | 3000V / 60 |
| Insulation 抵抗性 | >20MΩΩOmega;Ω |
| 波形失真 | 无额外的波形失真 |
| 环境温度 | -10ºCordm;Çordm;C~+40ºCordm;Çordm;C |
| 温度 上升 | ≤≤le;≤65ºCordm;Çordm;C |
| 相对的 湿度 | <95% |
| 噪声 | <55dB55dB |
| 冷却系统 | 浸油自冷 |
| 保护 | 过电压（设定值：430V）：欠压（设定值：350V），相序和故障报警 等保护功能。 |
| 定制选项的规格和可用性，请联系CONPO！ | |
| 模型 | 主要。产品规格 | 数量。每公斤 | 包装尺寸 | 备注 |
| tnsja-ii100kva | 3相，Vi：380V +/- 20％，Vo：380V +/- 1〜5％可调，油浸感应AVR， | 1件 | 900 * 900 *1600毫米 | 定制规格是可以接受的 |
| tnsja-ii150kva | 3相，Vi：380V +/- 20％，Vo：380V +/- 1〜5％可调，油浸感应AVR， | 1件 | 1000 * 1000 *1680毫米 | 定制规格是可以接受的 |
| tnsja-ii200kva | 3相，Vi：380V +/- 20％，Vo：380V +/- 1〜5％可调，油浸感应AVR， | 1件 | 1000 * 1000 *1680毫米 | 定制规格是可以接受的 |
| tnsja-ii250kva | 3相，Vi：380V +/- 20％，Vo：380V +/- 1〜5％可调，油浸感应AVR， | 1件 | 1000 * 1000 *1680毫米 | 定制规格是可以接受的 |
| tnsja-ii300kva | 3相，Vi：380V +/- 20％，Vo：380V +/- 1〜5％可调，油浸感应AVR， | 1件 | 1070 * 1070 *1780毫米 | 定制规格是可以接受的 |
| tnsja-ii350kva | 3相，Vi：380V +/- 20％，Vo：380V +/- 1〜5％可调，油浸感应AVR， | 1件 | 1070 * 1070 *1780毫米 | 定制规格是可以接受的 |
| tnsja-ii400kva | 3相，Vi：380V +/- 20％，Vo：380V +/- 1〜5％可调，油浸感应AVR， | 1件 | 1070 * 1070 *1780毫米 | 定制规格是可以接受的 |
| tnsja-ii500kva | 3相，Vi：380V +/- 20％，Vo：380V +/- 1〜5％可调，油浸感应AVR， | 1件 | 1070 * 1070 *1780毫米 | 定制规格是可以接受的 |
| tnsja-ii600kva | 3相，Vi：380V +/- 20％，Vo：380V +/- 1〜5％可调，油浸感应AVR， | 1件 | 1460 * 1460 *1950毫米 | 定制规格是可以接受的 |
| tnsja-ii700kva | 3相，Vi：380V +/- 20％，Vo：380V +/- 1〜5％可调，油浸感应AVR， | 1件 | 1460 * 1460 *1950毫米 | 定制规格是可以接受的 |
| tnsja-ii800kva | 3相，Vi：380V +/- 20％，Vo：380V +/- 1〜5％可调，油浸感应AVR， | 1件 | 1460 * 1460 *1950毫米 | 定制规格是可以接受的 |
| tnsja-ii900kva | 3相，Vi：380V +/- 20％，Vo：380V +/- 1〜5％可调，油浸感应AVR， | 1件 | 1460 * 1460 *1950毫米 | 定制规格是可以接受的 |
| tnsja-ii1000kva | 3相，Vi：380V +/- 20％，Vo：380V +/- 1〜5％可调，油浸感应AVR， | 1件 | 1500 * 1500 *2280毫米 | 定制规格是可以接受的 |
| tnsja-ii1250kva | 3相，Vi：380V +/- 20％，Vo：380V +/- 1〜5％可调，油浸感应AVR， | 1件 | 1500 * 1500 *2280毫米 | 定制规格是可以接受的 |
| tnsja-ii1600kva | 3相，Vi：380V +/- 20％，Vo：380V +/- 1〜5％可调，油浸感应AVR， | 1件 | 1600 * 1500 *2310毫米 | 定制规格是可以接受的 |
| tnsja-ii1800kva | 3相，Vi：380V +/- 20％，Vo：380V +/- 1〜5％可调，油浸感应AVR， | 1件 | 1600 * 1500 *2310毫米 | 定制规格是可以接受的 |
| tnsja-ii2000kva | 3相，Vi：380V +/- 20％，Vo：380V +/- 1〜5％可调，油浸感应AVR， | 1件 | 1600 * 1500 *2310毫米 | 定制规格是可以接受的 |
| Model NO. | TNSJA-100KVA (the 2nd generation technology) |
| Phase | Three Phase |
| Usage | Three-Phase, Four-Wire System |
| Iron Core Shape | Oil-Immersed AVR |
| Brand | Conpo |
| Specification | 100KVA/3Phase, Oil-immersed Induction AVR |
| HS Code | 8504401990 |
| Current Type | AC |
| Frequency Characteristics | Low Frequency |
| Frequency | 50Hz/60Hz |
| Application Range | Used in Region Where The Net Voltage Is Flucuating |
| Trademark | CONPO |
| Origin | Nanjing, China |
1.Summary :
TNSJA-II series the 2nd generation Industrial Oil-immersed Induction(Brushless/Stepless) Voltage Stabilizer is composed of voltage regulator and transformer SSTS (including, oil tank, stator, rotor top Cover, drive control motor M, hand wheel, control circuit board and secondary circuit elements for voltage regulation control. It achieves the rotational voltage regulation through electric motor drive or hand wheel and gear coupling within the rotation range of 1800. Besides, it is provided with the electric SS limit and mechanical limit on the upper end of the oil tank. For electric SS limit, the power supply of motor is switched off by a limit switch and for the mechanical limit, the rotational limit is stopped by bolt protector. The stator winding and rotor winding are fixed by the base frame and put into the oil tank with 10 # transformer oil. When the load generates heat, the heat dissipates from the radiating pipe by the way of Oil-immersed cooling. The oil immersed voltage stabilizer has the functions of phase failure, phase loss, overvoltage and over-current protections, and its main circuit has the characteristics of contactless voltage regulation, no mechanical wearing, no spark, no interference and low failure rate. In addition, this voltage stabilizer has the advantages of high impact resistance, super strong instantaneous overload capacity, long service life and maintenance free
2. Application:
This serial product is widely used in Industry, Traffic, Defense, Rail Ways, Large machine tool, Metal Processing Equipments, Production Line, Air Conditioner, Broadcast Television, Building Lighting Equipment and other Equipments which need stable voltage, and are highly suitable to the equipments which needs high reliable and high stable power supply, or equipments in high amplitude of fluctuation voltage net.
3. Feature s:
1). Stepless voltage adjustment (brushless)
With inductive and contactless voltage regulation, the voltage stabilizer can increase and decrease the load voltage linearly.
2). Excellent features
By using high-magnetic-inductivity silicon steel sheet made in Japan, this voltage stabilizer minimizes the no-load loss and no-load current, and with its performance utilized best, reduces power loss.
3). Robust, durable and long life expectancy
The internal body of this voltage stabilizer is induction voltage regulator IVR, containing no carbon brush and its main characteristics are permanent wear-proof, robust and long service life.
4). High efficiency, and low power consumption
Efficiency: ﹥98%, Power consumptiontion ≤≤le;≤ 1%
4.Specification s:
4. Packing Details:
TNSJA-II series the 2nd generation Industrial Oil-immersed Induction(Brushless/Stepless) Voltage Stabilizer is composed of voltage regulator and transformer SSTS (including, oil tank, stator, rotor top Cover, drive control motor M, hand wheel, control circuit board and secondary circuit elements for voltage regulation control. It achieves the rotational voltage regulation through electric motor drive or hand wheel and gear coupling within the rotation range of 1800. Besides, it is provided with the electric SS limit and mechanical limit on the upper end of the oil tank. For electric SS limit, the power supply of motor is switched off by a limit switch and for the mechanical limit, the rotational limit is stopped by bolt protector. The stator winding and rotor winding are fixed by the base frame and put into the oil tank with 10 # transformer oil. When the load generates heat, the heat dissipates from the radiating pipe by the way of Oil-immersed cooling. The oil immersed voltage stabilizer has the functions of phase failure, phase loss, overvoltage and over-current protections, and its main circuit has the characteristics of contactless voltage regulation, no mechanical wearing, no spark, no interference and low failure rate. In addition, this voltage stabilizer has the advantages of high impact resistance, super strong instantaneous overload capacity, long service life and maintenance free
2. Application:
This serial product is widely used in Industry, Traffic, Defense, Rail Ways, Large machine tool, Metal Processing Equipments, Production Line, Air Conditioner, Broadcast Television, Building Lighting Equipment and other Equipments which need stable voltage, and are highly suitable to the equipments which needs high reliable and high stable power supply, or equipments in high amplitude of fluctuation voltage net.
3. Feature s:
1). Stepless voltage adjustment (brushless)
With inductive and contactless voltage regulation, the voltage stabilizer can increase and decrease the load voltage linearly.
2). Excellent features
By using high-magnetic-inductivity silicon steel sheet made in Japan, this voltage stabilizer minimizes the no-load loss and no-load current, and with its performance utilized best, reduces power loss.
3). Robust, durable and long life expectancy
The internal body of this voltage stabilizer is induction voltage regulator IVR, containing no carbon brush and its main characteristics are permanent wear-proof, robust and long service life.
4). High efficiency, and low power consumption
Efficiency: ﹥98%, Power consumptiontion ≤≤le;≤ 1%
4.Specification s:
| TNSJA-II series the 2nd generation Industrial Oil-immersed Induction(Brushless/Stepless)Voltage Regulator | |
| Input voltage | 380V+/-15%(other input voltage range, such as 20% etc. please specify when ordering) |
| Output voltage | 380VAC(adjustable) |
| Output voltage accuracy | +/-1~5% adjustable (factory set value: +/-2%) |
| Frequency | 50Hz/60Hz |
| Power factor | 0.8 |
| Response time | <0.5s |
| Efficiency | >95% |
| Dielectric strength | 3000V/60s |
| Insulation resistance | >20MΩΩOmega;Ω |
| Waveform distortion | No additional waveform distortion |
| Ambient temperature | -10ºCordm;Cordm;C~+40ºCordm;Cordm;C |
| Temperature rise | ≤≤le;≤65ºCordm;Cordm;C |
| Relative humidity | <95% |
| Noise | <55dB55dB |
| Cooling system | Oil-immersed self-cooled |
| Protection | Over-voltage(set value:430V):under-voltage(set value: 350V), phase sequence, and fault alarm etc. protection functions. |
| Customize option for specification and availability, please contact CONPO! | |
| Model | Main. Specifications | Qty. per pkg | Package size | Remarks |
| TNSJA-II100KVA | 3Phase, Vi: 380V+/-20%, Vo: 380V+/-1~5% adjustable, Oil-immersed Induction AVR, | 1pc | 900*900*1600mm | Custom-made specifications are acceptable |
| TNSJA-II150KVA | 3Phase, Vi: 380V+/-20%, Vo: 380V+/-1~5% adjustable, Oil-immersed Induction AVR, | 1pc | 1000*1000*1680mm | Custom-made specifications are acceptable |
| TNSJA-II200KVA | 3Phase, Vi: 380V+/-20%, Vo: 380V+/-1~5% adjustable, Oil-immersed Induction AVR, | 1pc | 1000*1000*1680mm | Custom-made specifications are acceptable |
| TNSJA-II250KVA | 3Phase, Vi: 380V+/-20%, Vo: 380V+/-1~5% adjustable, Oil-immersed Induction AVR, | 1pc | 1000*1000*1680mm | Custom-made specifications are acceptable |
| TNSJA-II300KVA | 3Phase, Vi: 380V+/-20%, Vo: 380V+/-1~5% adjustable, Oil-immersed Induction AVR, | 1pc | 1070*1070*1780mm | Custom-made specifications are acceptable |
| TNSJA-II350KVA | 3Phase, Vi: 380V+/-20%, Vo: 380V+/-1~5% adjustable, Oil-immersed Induction AVR, | 1pc | 1070*1070*1780mm | Custom-made specifications are acceptable |
| TNSJA-II400KVA | 3Phase, Vi: 380V+/-20%, Vo: 380V+/-1~5% adjustable, Oil-immersed Induction AVR, | 1pc | 1070*1070*1780mm | Custom-made specifications are acceptable |
| TNSJA-II500KVA | 3Phase, Vi: 380V+/-20%, Vo: 380V+/-1~5% adjustable, Oil-immersed Induction AVR, | 1pc | 1070*1070*1780mm | Custom-made specifications are acceptable |
| TNSJA-II600KVA | 3Phase, Vi: 380V+/-20%, Vo: 380V+/-1~5% adjustable, Oil-immersed Induction AVR, | 1pc | 1460*1460*1950mm | Custom-made specifications are acceptable |
| TNSJA-II700KVA | 3Phase, Vi: 380V+/-20%, Vo: 380V+/-1~5% adjustable, Oil-immersed Induction AVR, | 1pc | 1460*1460*1950mm | Custom-made specifications are acceptable |
| TNSJA-II800KVA | 3Phase, Vi: 380V+/-20%, Vo: 380V+/-1~5% adjustable, Oil-immersed Induction AVR, | 1pc | 1460*1460*1950mm | Custom-made specifications are acceptable |
| TNSJA-II900KVA | 3Phase, Vi: 380V+/-20%, Vo: 380V+/-1~5% adjustable, Oil-immersed Induction AVR, | 1pc | 1460*1460*1950mm | Custom-made specifications are acceptable |
| TNSJA-II1000KVA | 3Phase, Vi: 380V+/-20%, Vo: 380V+/-1~5% adjustable, Oil-immersed Induction AVR, | 1pc | 1500*1500*2280mm | Custom-made specifications are acceptable |
| TNSJA-II1250KVA | 3Phase, Vi: 380V+/-20%, Vo: 380V+/-1~5% adjustable, Oil-immersed Induction AVR, | 1pc | 1500*1500*2280mm | Custom-made specifications are acceptable |
| TNSJA-II1600KVA | 3Phase, Vi: 380V+/-20%, Vo: 380V+/-1~5% adjustable, Oil-immersed Induction AVR, | 1pc | 1600*1500*2310mm | Custom-made specifications are acceptable |
| TNSJA-II1800KVA | 3Phase, Vi: 380V+/-20%, Vo: 380V+/-1~5% adjustable, Oil-immersed Induction AVR, | 1pc | 1600*1500*2310mm | Custom-made specifications are acceptable |
| TNSJA-II2000KVA | 3Phase, Vi: 380V+/-20%, Vo: 380V+/-1~5% adjustable, Oil-immersed Induction AVR, | 1pc | 1600*1500*2310mm | Custom-made specifications are acceptable |
