特征：
油浸电压稳压器由电压调节器和变压器SSTS（包括油箱，定子，转子顶盖，驱动控制电机M，手轮，控制电路板和电压调节二次电路元件组成，实现旋转电压在180°的旋转范围内通过电动机驱动或手轮和齿轮联轴器进行调节，并且在油箱上端设有电SS极限和机械极限，对于电SS限制，电机电源由限位开关关闭，对于机械极限，螺栓保护器停止旋转极限，定子绕组和转子绕组由基座固定，并放入带有10＃变压器油的油箱中，当负载产生加热时，散热管通过油浸冷却散热，油浸式电压稳定器具有相位失效，相位损耗，过电压和欠压的功能r电流保护，其主电路具有非接触式电压调节特性，无机械磨损，无火花，无干扰，故障率低。此外，该稳压器具有抗冲击性强，超强瞬时过载能力强，使用寿命长，维护方便等优点。
A.无级调压（无刷）
通过感应和非接触式电压调节，稳压器可以线性地增加和减小负载电压。
优良的功能
通过使用日本制造的高磁感应硅钢片，该电压稳压器可以最大限度地减少空载损耗和空载电流，并最大限度地降低功耗。
C.坚固耐用，使用寿命长
该稳压器的内部体是感应电压调节器IVR，不含碳刷，其主要特点是永久性耐磨，使用寿命长。
D.效率> 98％，无波形失真
应用：
大型机床，塑胶模具厂，车间及整厂稳压
规范：
阶段号：三相四系统
输入电压：
相电压220V +/- 20％（176〜264VAC），线电压380V +/- 20％（304〜356VAC）或
相电压220V +/- 30％（154〜286VAC），线电压380V +/- 30％（266〜494VAC）（可选）
输出电压：相电压220VAC，线电压380VAC
电压精度：+/- 1-5％（可调）
频率：50Hz / 60Hz
效率：95％; 95％
响应时间： <1.5S(against 10% input voltage deviation)ion)
环境温度：-10℃〜+ 40℃
绝缘电阻：>2MΩ;2MΩ
波形失真：无额外的波形失真
保护：
过电压/欠压，相序，过流，过载和报警装置等
过载能力：1min。额定电流为2次
电阻强度：电源频率正弦曲线为2000VAC，无故障，持续1min闪光。
备注：
定制规格是可以接受的。

Feature:
The oil immersed voltage stabilizer is composed of voltage regulator and transformer SSTS (including, oil tank, stator, rotor top Cover, drive control motor M, hand wheel, control circuit board and secondary circuit elements for voltage regulation control. It achieves the rotational voltage regulation through electric motor drive or hand wheel and gear coupling within the rotation range of 180o. Besides, it is provided with the electric SS limit and mechanical limit on the upper end of the oil tank. For electric SS limit, the power supply of motor is switched off by a limit switch and for the mechanical limit, the rotational limit is stopped by bolt protector. The stator winding and rotor winding are fixed by the base frame and put into the oil tank with 10 # transformer oil. When the load generates heat, the heat dissipates from the radiating pipe by the way of Oil-immersed cooling. The oil immersed voltage stabilizer has the functions of phase failure, phase loss, overvoltage and over-current protections, and its main circuit has the characteristics of contactless voltage regulation, no mechanical wearing, no spark, no interference and low failure rate. In addition, this voltage stabilizer has the advantages of high impact resistance, super strong instantaneous overload capacity, long service life and maintenance free.
A. Stepless voltage adjustment (brushless)
With inductive and contactless voltage regulation, the voltage stabilizer can increase and decrease the load voltage linearly.
B. Excellent features
By using high-magnetic-inductivity silicon steel sheet made in Japan, this voltage stabilizer minimizes the no-load loss and no-load current, and with its performance utilized best, reduces power loss.
C. Robust, durable and long life expectancy
The internal body of this voltage stabilizer is induction voltage regulator IVR, containing no carbon brush and its main characteristics are permanent wear-proof, robust and long service life.
D. Efficiency ﹥98%, with no waveform distortiontion
Application:
Large size machine tool, plastic mold factory, voltage stabilization for workshop and whole factory etc.
Specification:
Phase No.: Three phase four system
Input voltage:
Phase voltage 220V+/-20%(176~264VAC), wire voltage 380V+/-20%(304~356VAC) or
Phase voltage 220V+/-30%(154~286VAC), wire voltage 380V+/-30%(266~494VAC)(Optional)
Output voltage: Phase voltage 220VAC, wire voltage 380VAC
Accuracy of voltage: +/-1-5%(adjustable)
Frequency: 50Hz/60Hz
Efficiency: ﹥95%;95%
Response time: <1.5S(against 10% input voltage deviation)ion)
Ambient Temperature: -10C~+40C
Insulation resistance: ﹥2MΩ;2MΩ
Waveform distortion: Non additional waveform distortion
Protection:
Over-voltage/ under-voltage, phase sequence, over current, overload and alarm device etc.
Over-load capacity: 1min. At the rated current of 2times
Electricity-resistance strength: Power frequency sinusoidal is 2000VAC without breakdown and flash over when it lasts 1min.
Remarks:
Custom-made specifications are acceptable.