10W 20W 30W DC Portable Solar Power System for Generator
10W 20W 30W直流发电机便携式太阳能发电系统
| 型号。 | SNP-123 |
| 规范 | 正常的ISO9001 |
| 特殊的设计 | 接受 |
| 样品订单 | 接受 |
| 起源 | 广东佛山 |
| 应用 | 家庭，工业，商业 |
| OEM / ODM | 服务 |
| 公司 | Maunfacturer |
| 商标 | SNAT |
| HS编码 | 8504403090 |
系统介绍：
本产品采用便携式设计，内置电池和太阳能电源控制器，专门为小功率直流负载供电;太阳能控制器处理电池端子电压，放电电流，环境温度，电池容量参数通过电脑芯片。通过特殊控制模型计算，实现符合电池放电率，高效率，高控制精度的温度补偿校正特性，采用高效的PWM电池充电模式，可以确保电池工作在最佳状态，按顺序大大延长电池的使用寿命。系统配有12 VDC或5 VDC输出端子，具有短路，过载，独特的反向，充满放电自动关闭，并恢复全功能保护措施;详细的充电指示灯，电池状态，负载和各种故障指示器。
主要特点：
1，单片机智能控制，优化SOC算法。
2，内置温度传感器，可有效提高内置电池充电效率。
3，具有充电和放电，电子短路保护，过载保护，自动控制为独特的反向的保护。
如图4所示，主电路通过串联PWM充电，这使电压损耗的充电电路比使用二极管的充电电路，以减少近一半，充电效率比非PWM高3％-6％，增加的时间利用率。
5，放充电，正常直充电器的提升，浮动自动控制方法使系统具有更长的使用寿命。
6，直观的数字管+ LED显示系统。
优点：
1，太阳能发电系统：
2，太阳能： 将无成本的阳光投入电力，而不需要消耗石油，天然气或煤炭。改善电力网络生活。
3，相当，
4，环保，无排放
5，使用方便： 高可操作的输入和输出系统，无需安装调整。
技术指标
| 模型 | SJY-10012 | SJY-20012 | SJY-30012 | |
| 太阳能板 | 类型 | 单色或聚A级 | ||
| 功率 | 10W | 20W | 30W | |
| 尺寸（mm） | 96*132*186 | 128*156*186 | 163*227*227 | |
| 太阳能充电控制器 | 控制方式 | 高效PWM | ||
| 充电电流 | 5A / 12V | |||
| 保护 | 保护过充，过放，短路，过载 | |||
| 过充电保护电压 | 14.3V | |||
| 促进充电的电压 | 14.0V | |||
| 浮充充电电压 | 13.8V | |||
| 过放电保护 | 10.5V | |||
| 数码管显示 | / | 显示电池的当前电压 | ||
| LED显示屏 | 充电，负载和电池容量指示 | |||
| 电池 | 电池类型 | 深循环铅酸蓄电池，免维护 | ||
| 电池容量 | 12V / 7AH | 12V / 12AH | 12V / 24AH | |
| 直流输出 | 最大输出功率 | 60瓦特（12V，5A） | ||
| DC12V | 2个插座 | 4个插座 | ||
| dc5vusb | 1pc USB输出（MAX.2A） | 2个USB输出（MAX.3A） | ||
| 饰品 | led灯dc 12v | 一套3W和5W（2个灯座，开关和3M和5M的电缆） | 2片3W和5W（4个灯座，开关电缆3M和5M） | |
| USB充电器 | 1pc多功能充电器 | |||
| 太阳能电池板支架 | 一套（2件） | |||
| 电缆 | 5M | |||
| 交流充电器 | 您可以选择交流充电器;充电模式为城市供电时 | |||
保证：
1年质量保证，包括从本公司采购的所有相关产品;零件将在保修期内免运费。
交货时间：
坚持合同
特殊插座用于不同的要求
任何要求，欢迎联系 刘小姐:点击贸易信使; 电话：+86 757 81816131;手机：+86 18039293535。,
您将在12小时内收到我们的答复
| Model NO. | SNP-123 |
| Specification | Normal, CE; ISO9001 |
| Special Design | Accept |
| Sample Order | Accept |
| Origin | Foshan Guangdong |
| Application | Home, Industrial, Commercial |
| OEM/ODM | Serve |
| Company | Maunfacturer |
| Trademark | SNAT |
| HS Code | 8504403090 |
System introduction:
This product uses portable design, built-in battery and solar power controller, which is dedicated to supply the power to small power DC load ;Solar controller process the sample of the battery terminal voltage, discharge current, environment temperature, involving the battery capacity parameters through the computer chips. Through the special control model calculation, implementation conforms to the characteristics of battery discharge rate, temperature compensation correction of high efficiency, high control accuracy, and adopt the efficient PWM battery charging mode, which can ensure the battery work in the best state, in order to greatly extend the service life of battery.System comes with 12 VDC or 5 VDC output terminal, with short circuit, overload, unique reverse, full of, discharge automatically shut off, and restore full function protection measures;Detailed charging indicator, battery status, load, and various fault indicator.
Main features:
1, the single chip microcomputer intelligent control, optimize the SOC algorithm.
2, the built-in temperature sensor, which can effectively increase the built-in battery charging efficiency.
3, with the charge and discharge, electronic short circuit protection, overload protection, automatic control for the protection of the unique reverse.
4, main circuit adopted tandem PWM charging, which made the charging circuit of voltage loss than using diode charging circuit to reduce the nearly half, charging efficiency is higher 3%-6% than the non-PWM , increases the utilization of time.
5, put the ascension of charging, normal straight charger, floating automatic control method make the system have a longer service life.
6, intuitive digital pipe + LED display system.
Advantage:
1, Solar Power System:
2,Solar energy: Invert cost-free sunlight into power without consuming oil, gas, or coal. Improve life in area out of electricity network.
3,Quite,
4,Environmental friendly, No emission
5,Easy use: Highly operable input and output system, requiring no adjustment for installation.
Technical index
| Model | SJY-10012 | SJY-20012 | SJY-30012 | |
| Solar panel | Type | Mono or poly A grade | ||
| Power | 10W | 20W | 30W | |
| Size(mm) | 96*132*186 | 128*156*186 | 163*227*227 | |
| Solar charging controller | Control way | High efficiency PWM | ||
| Charging current | 5A/12V | |||
| Protection | Protection of the over charge,over discharge,short circuit,over load | |||
| Voltage of over charge protection | 14.3V | |||
| Voltage of promoting charging | 14.0V | |||
| Float charging voltage | 13.8V | |||
| Over discharge protection | 10.5V | |||
| Digital tube display | / | Display the current voltage of battery | ||
| LED display | Indication of charging,load and battery capacity | |||
| Battery | Battery type | Deep cycle lead-acid battery with free maintenance | ||
| Battery capacity | 12V/7AH | 12V/12AH | 12V/24AH | |
| DC output | Max output power | 60W(12V,5A) | ||
| DC12V | 2pcs outlet | 4pcs outlet | ||
| DC5VUSB | 1pc USB output(MAX.2A) | 2pcs USB output(MAX.3A) | ||
| Accessories | LED light DC 12V | One set of 3W and 5W(2pcs lamp holder,with switch and the cable of 3M and 5M) | 2sets of 3W and 5W(4pcs lamp holder,with switch and cable of 3M and 5M) | |
| USB charger | 1pc multifunctional charger | |||
| Solar panel bracket | One set(2pcs) | |||
| Cable | 5M | |||
| AC charger | You can choose AC charger;when the charging mode is city power | |||
Warranty:
Quality warranty for 1 year, including all relative products purchased from our company; parts will be shipped free during warranty period.
Delivery time:
Stick to contract
Special sockets for different requirements
Any requirements, welcome to contact with Sabrina Liu:Click Trade messenger; Tel: +86 757 81816131; Mobile: +86 18039293535.,
You will get our reply in 12 hours
