100W Portable DC Solar Powe System

100W Portable DC Solar Powe System

100W便携式直流太阳能电源系统

1+
150 USD
3+
149 USD

加入意向
型号。 dl-100ah -100w
规范 正常,ce:hohe-150806004ce
品牌 SNAT
公司 生产厂家
运输包装 纸板箱
HS编码 8504403090
应用 家庭,工业,商业,学校,街道,牧区等
OEM / ODM 提供
样品订单 接受
商标 SNAT
起源 佛山/广州中国
产品概述
它是用于为小功率负载供电的便携式产品。它具有内置电池和内置太阳能控制器
太阳能控制器通过计算机芯片和计算机通过专用控制模块对电池的端子电压和容量,放电电流和环境温度等参数进行采样,以实现对排放速率和温度补偿的高效和准确的控制具有电池的特点
通过高效的PWM充电模式,电池可以处于最佳状态,寿命长
该系统具有12VDC输出端子和5VDC输出端子,整体保护如短路保护,过载保护,独特的反向连接防止,充满电或过充电时的自动关闭,详细的充电指示,电池状态指示,负载指示和故障指示。
主要特点
SCM智能控制和优化SOC算法
内置温度传感器可有效提高内置电池的充电效率
全自动控制,如过充电保护,过放电保护,电子电路保护,过载保护和独特的反向连接防止
串联连接PWM充电主电路使充电电路的电压损耗小于二极管充电电路的电压损耗近一半,充电效率比非PWM充电主电路高3%至6%,并增加时间的功耗
长寿命是由自动控制模式引起的,包括提高从过充电,正常直接充电和浮动费用中恢复的费用
通过数码管和LED可视化显示系统状态
技术指标

模型
DL-7AH DL-12AH DL-24AH DL-50AH DL-100AH
太阳能板 类型 A类单晶硅或多晶硅面板
功率 10W 20W 30W 50W 100W
尺寸 96*136*193 126*156*193 163*244*234 176*279*288 213*300*383
太阳能控制器 控制模式 高效PWM
充电电流 5A / 12V 10A / 12V
保护功能 过充保护,过放电保护,电子线路呼叫电路保护,过载保护
过充电保护电压 14.3V
升压电压 14.0V
浮充电压 13.8V
过充电保护电压 10.5V
显示如果数码管 电池的当前电压
指示灯 充电指示,负载指示和电池指示
电池 电池类型 深循环无铅无铅铅酸指示
电池容量 12V / 7AH 12V / 12AH 12V / 24AH 50AH 100AH
直流输出 最大输出功率 600瓦特(12V / 5A) 120瓦特(12V / 10A)
直流12v 2 4 5 6
直流15v usb 1 usb(最大2a) 2 usb(最大3a)
附件包括 12V直流LED指示灯 A3W LED和5W LED(包括2个灯座,3M灯丝和5W灯丝) 两个3W LED和两个5W LED(包括4个灯座,2个3M灯丝和2个5W灯丝)
USB充电线 通用充电线
太阳能电池板支架 一套(含2件)
太阳能电池板的电线 5M
交流充电器 当没有太阳能电源并通过电源充电时,可选附件

保证:
质量保证1年;零件将在保修期内免费发货。
交货时间:
坚持合同
同时从事相关太阳能发电系统产品如太阳能电池板,凝胶电池,密封铅酸蓄电池,组合箱等
接受特殊设计要求。
任何要求,欢迎联系萧萧点击贸易信使;电话:+86 757 81816131;手机:+86 13570423516。
Model NO. DL-100AH -100W
Specification Normal, CE: HOHE-150806004CE
Brand Name Snat
Company Manufacturer
Transport Package Carton
HS Code 8504403090
Application Home, Industrial, Commercial, School,Streets,Pasturing Areas,,,etc
OEM/ODM Provide
Sample Order Accept
Trademark SNAT
Origin Foshan/Guangzhou China
Product overview
It is a portable product for supplying power for small-power loads.it has a built-in battery and a built-in solar controller
The solar controller samples parameters such as the battery's terminal voltage and capacity, the discharge current and the ambient temperature with help of a computer chip and computers through a special control module to realize efficient and accurate control over the discharge rate and the temperature compensation in line with characteristics of the battery
With an efficient PWM charge mode, the battery can operate in the best status and have a long life
The system has a 12VDC output terminal and a 5VDC output terminal, overall protection such as short circuit protection, overload protection, unique reverse connection prevention, automatic shutoff upon full charge or overcharge, detailed charge indication, battery status indication, load indication and fault indication.
Main features
SCM intelligent control and optimization SOC algorithm
Built-in temperature sensor which can improve charge efficiency of the built-in battery effectively
Full-automatic control such as over charge protection, over discharge protection, electronic circuit protection, overload protection and unique reverse connection prevention
A serial-connection PWM charge main circuit which makes voltage loss of the charge circuit less than that of the charge circuit of a diode by nearly half and the charge efficiency 3% to6% higher than a non-PWM charge main circuit and increases the time of power consumption
A long life contributed by automatic control modes including boosting charge for recovery from overcharge, normal direct charge and floating charges
Visualized display of the system status by nixie tube and LEDs
TECHINICAL INDEXES

Model
DL-7AH DL-12AH DL-24AH DL-50AH DL-100AH
solar panel type Monocrystalline silicon or polycrystalline silicon panel of class A
power 10W 20W 30W 50W 100W
dimensions 96*136*193 126*156*193 163*244*234 176*279*288 213*300*383
solar controller Control mode Efficient PWM
Charge current 5A/12V 10A/12V
Protection functions overcharge protection, over discharge protection, electronic circuit shout circuit protection, overload protection
Voltage of overcharge protection 14.3V
Voltage of boosting charge 14.0V
voltage of floating charge 13.8V
Voltage of overcharge protection 10.5V
Display if nixie tube current voltage of the battery
Indication of LEDs charge indication, load indication and battery indication
battery Battery type Deep-cycle maintence0-free lead-acid indication
Battery capacity 12V/7Ah 12V/12Ah 12V/24Ah 50Ah 100Ah
DC output Maximum output power 600W(12V/5A) 120W(12V/10A)
DC 12V 2 4 5 6
DC 15V USB 1 USB (max 2A) 2 USB (max 3A)
Accessories included 12V DC LED indicator A3W LED and a 5W LED (including 2 lamp holder, a 3M lamp wire and a 5W lamp wire) Two 3W LEDs and two 5W LEDs(including 4 lamp holders, two 3M lamp wire and two 5W lamp wire)
USB charge line a universal charge line
Solar panel bracket A set (including 2 pieces)
Electric wire of the solar panel 5M
AC charger An optional accessory when there is no solar power supply and charging by mains supply

Warranty:
Quality warranty for 1 year; parts will be shipped for free during warranty period.
Delivery time:
Stick to contract.
Concurrently engaged in relative solar power system products such as solar panel, gel battery, sealed lead acid battery, Combiner box, etc
Accept special design requirements.
Any requirements, welcome to contact with Scarlett huang Click Trade messenger; Tel: +86 757 81816131; Mobile: +86 13570423516.