Large UPS Power Supply 10kVA-80kVA for Industral Equipments
大功率容量UPS电源10kVA-80kVA三相
| 型号。 | GL33 10kva-80kva |
| 类型 | 线上 |
| 应用 | 行业 |
| 待机UPS | 正弦波输出UPS |
| 特征 | 隔离变压器 |
| 电力效率 | 0.9 |
| 电池类型 | 密封铅酸免维护电池 |
| 商标 | STCB /中性 |
| 起源 | 广州深圳 |
| 相 | 三阶段 |
| 保护 | 过压保护 |
| 待机时间 | 长效机 |
| 输出容量 | 大型 |
| 输入电压 | 380v400 / 415VAC |
| 转移时间 | 0 Ms |
| 保证 | 12个月 |
| 运输包装 | 纸箱 |
| HS编码 | 8504402000 |
大型UPS电源10kVA-80kVA用于工业设备
主要特点： 1. 在线双转换
2. DSP技术保证了高可靠性
3. 真电隔离变压器设计
4. 控制设计可承受各种负载
5. 智能电池管理延长电池寿命
6. 冗余风扇设计和独立通风可在恶劣环境下增强耐用性
7. 可调电池号码
8. 接受双电源输入
9. 最多可同时运行4台（可选）
10.可用的通信选项多种多样
产品说明：
在线系列是一种不间断电源
双转换器技术。它提供完美的保护专门为
严格负载。
双转换器原理消除了所有主电源
干扰。整流器将来自插座的交流电转换
出口直流电流。这种直流电充电电池
逆变器。
在电源故障的情况下，免维护电池
为变频器供电。因此，逆变器产生正弦波交流电源，
永久地提供负载。
设计了经过验证的在线双重转换架构，这一点
UPS系列在电源保护方面提供最大程度的可用性
并提供连续高品质的交流电源连接严格负载，
特别是部分地区的基础设备有：金融，
交流，政府，交通，制造，教育等。
另外UPS还提供丰富的接口，如RS232，SNMP，AS400和RS485，用于监控和配置。
规范：
| 模型 | gl33 10K | gl33 20K | gl33 30K | gl33 40K | gl33 60K | gl33 80K | |
| 容量 | 10KVA 8千瓦 | 20KVA 16千瓦 | 30KVA 24千瓦 | 40KVA /32千瓦 | 60KVA 48千瓦 | 80KVA 64千瓦 | |
| 输入 | |||||||
| 标称电压 | 3 x 380vac / 400vac（3ph + n） | ||||||
| 电压范围 | 305vac〜460vac | ||||||
| 频率 | 46-54Hz或56-64Hz | ||||||
| 逆变器 | |||||||
| 标称电压 | 3 x 380vac / 400vac（3ph + n） | ||||||
| 精确 | 固定：±1％lusmn; 1％lusmn;1% 暂时性：±5％（负荷变化100-0-100％）0-0-100％）-0-100%) | ||||||
| 频率 | 50/60 Hz同步±1％usmn; 1％usmn;1 % 电源不在±0.1 Hzn; 0.1 Hzn;0.1 Hz | ||||||
| 最大。同步速度 | ±1 Hz / sn; 1 Hz / sn;1 Hz/s | ||||||
| 波形 | 纯正弦 波 | ||||||
| 总谐波 失真（THDv） | <2% (Linear Load)oad) <5% (Non-linear Load)oad) | ||||||
| 相位移 | 120º±1％（平衡负载）荷载）alanced load) 120º±2％（不平衡负载的50％）） of the load) | ||||||
| 动态恢复时间 | 1周期为98％的静态值 | ||||||
| 允许重载 | 110％10分钟; 150％60秒; > 200ms00ms> 160％ | ||||||
| 允许波峰因数 | 3:1 | ||||||
| 允许功率因数 | 0.6〜1（感性或电容） | ||||||
| 不平衡输出电压 | <1% @ 100% Unbalanced LoadLoad | ||||||
| 电流限制 | 高过载，短路：有效值电压限制 高峰值电流：峰值电压限制 | ||||||
| 静态旁路 | |||||||
| 类型 | 固体状态 | ||||||
| 电压 | 3 x 380vac / 400vac（3ph + n） | ||||||
| 频率 | 50/60 Hz | ||||||
| 激活标准 | 微处理器控制 | ||||||
| 转移时间 | 零 | ||||||
| 允许重载 | 150％1小时; 180％30秒; > 200毫秒200毫秒 | ||||||
| 转移到旁路 | 即时，过载超过160％ | ||||||
| 再转移 | 报警后自动清除 | ||||||
| 维护旁路 | |||||||
| 类型 | 不间断 | ||||||
| 电压 | 3×400v（3ph + n） | ||||||
| 频率 | 50/60 Hz | ||||||
| 总体 效率 | 线路模式 | 90% | 91% | 92% | 93% | ||
| 电池模式 | 90% | 91% | 93% | 93% | |||
| 电池和充电器ARGER | |||||||
| 电池类型和数字 | 16个 | 32个（29〜32个可调） | |||||
| 标称电池电压 | 192 vdc | 384 VDC（基于32个电池） | |||||
| 充电方法 | CC / CV | ||||||
| 精确 | ±1％lusmn; 1％lusmn;1% | ||||||
| 充电电流 | 最大值：40 A | ||||||
| 充电电压 | 216 vdc | 432 VDC（基于32个电池） | |||||
| 物理 | |||||||
| 尺寸（mm） | 656 x 405 x 817 | 656 x 405 x 941 | 840 x 432 x 1140 | 975 x 554 x 1286 | |||
| 净重/公斤） | 180 | 205 | 295 | 330 | 451 | 519 | |
公司及厂家：
项目及展会：
我们的服务：
OEM和ODM服务可以接受。able.
提供1％的PCB板。
3.海运或空运的合作代理。
4.一年的战争，如果是质量问题，我们将免费提供零件。
Q1：为什么要选择我们？
--- 16年UPS经验
---海内外市场专业团队
- 上海合作组织会议2015年上海 - 昆明高速铁路项目提供商
---合格产品加上竞争价格
---交货时间
---诚信服务
Q2：您的售后服务如何？
---我们自交货之日起提供12-24个月保修期，免费维修/
更换期间 保修期。
Q3：你有什么样的认证？
--- iso9000，ce，rohs，ul等等
我们的产品可以根据不同国家的要求进行不同的劳动力测试。
Q4：交货时间：
---标准产品可在15天内交货;定制产品可以
内部开发 45-60天。
| Model NO. | GL33 10kva-80kva |
| Type | On-line |
| Application | Industry |
| Standby UPS | Sine Wave Output UPS |
| Features | Isolated Transformer |
| Power Efficiency | 0.9 |
| Battery Type | Sealed Lead Acid Maintenance-Free Battery |
| Trademark | STCB/Neutral |
| Origin | Guangzhou Shenzhen |
| Phase | Three Phase |
| Protection | Overvoltage |
| Standby Time | Long-acting Machine |
| Output Capacity | Large Type |
| Input Voltage | 380V400/415VAC |
| Transfer Time | 0 Ms |
| Warranty | 12 Months |
| Transport Package | Cartons |
| HS Code | 8504402000 |
Large UPS Power Supply 10kVA-80kVA for industral equipments
Main Features: 1. Online double-conversion
2. DSP technology guarantees high reliability
3. True galvanic isolation transformer design
4. Control designed to withstand all kinds of loads
5. Intelligent battery management to prolong battery lifecycle
6. Redundant fan design and independent ventilation enhance durable operation under harsh environment
7. Adjustable battery numbers
8. Accept dual-mains input
9. Parallel operation with up to 4 units (option)
10.Variety of communication options available
Product discription:
The On-Line-Series is an uninterruptible power supply incorporating
double-converter technology. It provides perfect protection specifically for
strict load.
The double-converter principle eliminates all mains power
disturbances. A rectifier converts the alternating current from the socket
outlet to direct current. This direct current charges the batteries and powers
the inverter.
In the event of power failure, the maintenance-free batteries
power the inverter. Thus the inverter generates a sine wave AC power,
which permanently supplies the loads.
Designed with the proven on-line, double conversion architecture, this
series of UPS offers the greatest degree of availability in power protection
and provides continuous high-quality AC power to connect strict load,
especially for the basic equipments in some areas as: finance,
communication, government, traffic, manufacture, education and so on.
Additionally The UPS provides abundant interfaces such as RS232, SNMP, AS400, and RS485 for supervision and configure.
Specification:
| MODEL | GL33 10K | GL33 20K | GL33 30K | GL33 40K | GL33 60K | GL33 80K | |
| CAPACITY | 10KVA 8KW | 20KVA 16KW | 30KVA 24KW | 40KVA /32KW | 60KVA 48KW | 80KVA 64KW | |
| INPUT | |||||||
| Nominal Voltage | 3 x 380VAC/400VAC (3Ph + N) | ||||||
| Voltage Range | 305VAC ~ 460VAC | ||||||
| Frequency | 46-54Hz or 56-64Hz | ||||||
| INVERTER | |||||||
| Nominal Voltage | 3 x 380VAC/400VAC (3Ph + N) | ||||||
| Precision | Stationary: ±1%lusmn;1%lusmn;1% Transitory: ±5% (load variations 100-0-100%)0-0-100%)-0-100%) | ||||||
| Frequency | 50/60 Hz synchronised ±1 %usmn;1 %usmn;1 % With mains absent ±0.1 Hzn;0.1 Hzn;0.1 Hz | ||||||
| Max. Synchronisation Speed | ±1 Hz/sn;1 Hz/sn;1 Hz/s | ||||||
| Waveform | Pure Sine wave | ||||||
| Total Harmonic Distortion (THDv) | <2% (Linear Load)oad) <5% (Non-linear Load)oad) | ||||||
| Phase Displacement | 120º ±1% (balanced load)alanced load)alanced load) 120º ±2% (imbalances 50% of the load) of the load) of the load) | ||||||
| Dynamic Recovery Time | 1 cycle at 98 % of the static value | ||||||
| Admissible Overload | 110% for 10min; 150% for 60sec ; ﹥160% for 200ms00ms | ||||||
| Admissible Crest Factor | 3:1 | ||||||
| Admissible Power Factor | 0.6~1 (inductive or capacitive) | ||||||
| Imbalance Output Voltage | <1% @ 100% Unbalanced LoadLoad | ||||||
| Current Limit | High overload, short-circuit: RMS Voltage Limit High Crest-Factor current: Peak Voltage Limit | ||||||
| STATIC BYPASS | |||||||
| Type | Solid state | ||||||
| Voltage | 3 x 380VAC/400VAC (3Ph + N) | ||||||
| Frequency | 50/60 Hz | ||||||
| Activation Criterion | Microprocessor control | ||||||
| Transfer Time | Zero | ||||||
| Admissible Overload | 150% for 1 hour; 180% for 30sec; ﹥200% for 200ms00ms | ||||||
| Transfer to Bypass | Immediate, for overloads above 160% | ||||||
| Retransfer | Automatic after alarm clear | ||||||
| MAINTENANCE BYPASS | |||||||
| Type | Without interruption | ||||||
| Voltage | 3 x 400V (3Ph + N) | ||||||
| Frequency | 50/60 Hz | ||||||
| Overall Efficiency | Line Mode | 90% | 91% | 92% | 93% | ||
| Battery Mode | 90% | 91% | 93% | 93% | |||
| BATTERY & CHARGERARGERARGER | |||||||
| Battery Type and Numbers | 16 pcs | 32 pcs (29~32 pcs adjustable) | |||||
| Nominal Battery Voltage | 192 VDC | 384 VDC (Based on 32pcs batteries) | |||||
| Charging Method | CC/CV | ||||||
| Precision | ±1%lusmn;1%lusmn;1% | ||||||
| Charging Current | Max.: 40 A | ||||||
| Charging Voltage | 216 VDC | 432 VDC (Based on 32pcs batteries) | |||||
| PHYSICAL | |||||||
| Dimensions(mm) | 656 x 405 x 817 | 656 x 405 x 941 | 840 x 432 x 1140 | 975 x 554 x 1286 | |||
| Net Weight (Kg) | 180 | 205 | 295 | 330 | 451 | 519 | |
Company and factory:
Project and Trade show:
Our services:
1. OEM&ODM services acceptable.able.able.
2. 1% pcb board provided .
3. Lots of cooperated agent for shipping by sea or by air.
4. 1year warrenty , if it is quality problem , we will provide the parts for free .
Q1: Why you should choose us?
---16 years UPS experiences
---Professional team for both oversea and domestic market
--UPS provider of SCO meeting 2015 and Shanghai-Kunming high-speed railway project
---Qualified product plus competitable prices
---Delivery in time
---Sincerely services
Q2: How is your after-sale service?
---We provide 12-24 months warranty since the delivery date and free maintenance /
replacement during warranty period.
Q3: What kind of certification you have?
---ISO9000, CE,ROHS,UL,and so on
Our products could pass different labor testing according to different countries' requirements.
Q4: Delivery time:
---Standard products could be delivered within 15 days; customized products could be
developed within 45-60days.
