80kVA Online UPS 380V Input & Output
80kVA在线UPS三相输入和输出
| 型号。 | gl33 80kva |
| 类型 | 线上 |
| 应用 | 行业 |
| 待机时间 | 长效机 |
| 输出容量 | 大型 |
| 特征 | 隔离变压器 |
| 电力效率 | 0.9 |
| 电池类型 | 密封铅酸免维护电池 |
| 商标 | STCB /中性 |
| 起源 | 广州深圳 |
| 相 | 三阶段 |
| 保护 | 过电压/短路 |
| 分类 | 设备功率 |
| 待机UPS | 正弦波输出UPS |
| 设备模式 | 集中模式 |
| 输入电压 | 380v400 / 415VAC |
| 转移时间 | 0 Ms |
| 保证 | 12个月 |
| 运输包装 | 纸箱 |
| HS编码 | 8504402000 |
80kva在线UPS 380v输入输出utput
主要特点：
在线双转换
DSP技术保证了高可靠性
真正的电隔离变压器设计
4.设计用于承受各种负载的控制
智能电池管理延长电池寿命
6.冗余风扇设计和独立通风可在恶劣环境下增强耐用性
7.可调电池号码
8.接受双电源输入
9.最多可同时运行4台（可选）
10.可用的通信选项多种多样
产品说明：
在线系列是一种不间断电源
双转换器技术。它提供完美的保护专门为
严格负载。
双转换器原理消除了所有主电源
干扰。整流器将来自插座的交流电转换
出口直流电流。这种直流电充电电池
逆变器。
在电源故障的情况下，免维护电池
为变频器供电。因此，逆变器产生正弦波交流电源，
永久地提供负载。
设计了经过验证的在线双重转换架构，这一点
UPS系列在电源保护方面提供最大程度的可用性
并提供连续高品质的交流电源连接严格负载，
特别是部分地区的基础设备有：金融，
交流，政府，交通，制造，教育等。
另外UPS还提供丰富的接口，如RS232，SNMP，AS400和RS485，用于监控和配置。
规范：
*产品规格如有更改，恕不另行通知
主要特点：
在线双转换
DSP技术保证了高可靠性
真正的电隔离变压器设计
4.设计用于承受各种负载的控制
智能电池管理延长电池寿命
6.冗余风扇设计和独立通风可在恶劣环境下增强耐用性
7.可调电池号码
8.接受双电源输入
9.最多可同时运行4台（可选）
10.可用的通信选项多种多样
产品说明：
在线系列是一种不间断电源
双转换器技术。它提供完美的保护专门为
严格负载。
双转换器原理消除了所有主电源
干扰。整流器将来自插座的交流电转换
出口直流电流。这种直流电充电电池
逆变器。
在电源故障的情况下，免维护电池
为变频器供电。因此，逆变器产生正弦波交流电源，
永久地提供负载。
设计了经过验证的在线双重转换架构，这一点
UPS系列在电源保护方面提供最大程度的可用性
并提供连续高品质的交流电源连接严格负载，
特别是部分地区的基础设备有：金融，
交流，政府，交通，制造，教育等。
另外UPS还提供丰富的接口，如RS232，SNMP，AS400和RS485，用于监控和配置。
规范：
| 模型 | gl33 10K | gl33 20K | gl33 30K | gl33 40K | gl33 60K | gl33 80K | |
| 容量 | 10KVA 8千瓦 | 20KVA 16千瓦 | 30KVA 24千瓦 | 40KVA /32千瓦 | 60KVA 48千瓦 | 80KVA 64千瓦 | |
| 输入 | |||||||
| 额定电压 | 3 x 380vac / 400vac（3ph + n） | ||||||
| 电压范围 | 305vac〜460vac | ||||||
| 频率 | 46-54Hz或56-64Hz | ||||||
| 逆变器 | |||||||
| 额定电压 | 3 x 380vac / 400vac（3ph + n） | ||||||
| 精确 | 固定：±1％lusmn; 1％lusmn;1% 暂时性：±5％（负荷变化100-0-100％）0-0-100％）-0-100%) | ||||||
| 频率 | 50/60 Hz同步±1％usmn; 1％usmn;1 % 电源不在±0.1Hzmn; 0.1Hzn;0.1 Hz | ||||||
| 最大。同步速度 | ±1 Hz / sn; 1 Hz / sn;1 Hz/s | ||||||
| 波形 | 纯正弦波 | ||||||
| 总谐波 失真（THDv） | <2% (Linear Load)oad) <5% (Non-linear Load)oad) | ||||||
| 相位移 | 120º±1％（平衡负载）荷载）alanced load) 120º±2％（不平衡负载的50％）） of the load) | ||||||
| 动态恢复时间 | 1周期为98％的静态值 | ||||||
| 允许重载 | 110％10分钟; 150％60秒; > 200ms00ms> 160％ | ||||||
| 允许波峰因数 | 3:1 | ||||||
| 允许功率因数 | 0.6〜1（感性或电容） | ||||||
| 不平衡输出电压 | <1% @ 100% Unbalanced LoadLoad | ||||||
| 电流限制 | 高过载，短路：有效值电压限制 高峰值电流：峰值电压限制 | ||||||
| 静态旁路 | |||||||
| 类型 | 固体状态 | ||||||
| 电压 | 3 x 380vac / 400vac（3ph + n） | ||||||
| 频率 | 50/60 Hz | ||||||
| 激活标准 | 微处理器控制 | ||||||
| 转移时间 | 零 | ||||||
| 允许重载 | 150％1小时; 180％30秒; > 200毫秒200毫秒 | ||||||
| 转移到旁路 | 即时，过载超过160％ | ||||||
| 再转移 | 报警后自动清除 | ||||||
| 维护旁路 | |||||||
| 类型 | 不间断 | ||||||
| 电压 | 3×400v（3ph + n） | ||||||
| 频率 | 50/60 Hz | ||||||
| 总体 效率 | 线路模式 | 90% | 91% | 92% | 93% | ||
| 电池模式 | 90% | 91% | 93% | 93% | |||
| 电池和充电器ARGER | |||||||
| 电池类型和数字 | 16个 | 32个（29〜32个可调） | |||||
| 标称电池电压 | 192 vdc | 384 VDC（基于32个电池） | |||||
| 充电方法 | CC / CV | ||||||
| 精确 | ±1％lusmn; 1％lusmn;1% | ||||||
| 充电电流 | 最大值：40 A | ||||||
| 充电电压 | 216 vdc | 432 VDC（基于32个电池） | |||||
| 物理 | |||||||
| 尺寸（mm） | 656*405*817 | 656*405*941 | 840*432*1140 | 975*554*1286 | |||
| 净重/公斤） | 180 | 205 | 295 | 330 | 451 | 519 | |
| Model NO. | GL33 80KVA |
| Type | On-line |
| Application | Industry |
| Standby Time | Long-acting Machine |
| Output Capacity | Large Type |
| Features | Isolated Transformer |
| Power Efficiency | 0.9 |
| Battery Type | Sealed Lead Acid Maintenance-Free Battery |
| Trademark | STCB/Neutral |
| Origin | Guangzhou Shenzhen |
| Phase | Three Phase |
| Protection | Over Voltage / Short Circuit |
| Classification | Equipment Power |
| Standby UPS | Sine Wave Output UPS |
| Equipment Mode | Centralized Model |
| Input Voltage | 380V400/415VAC |
| Transfer Time | 0 Ms |
| Warranty | 12 Months |
| Transport Package | Cartons |
| HS Code | 8504402000 |
80kva Online UPS 380v Input & OutputOutpututput
Main Features:
1. Online double-conversion
2. DSP technology guarantees high reliability
3. True galvanic isolation transformer design
4. Control designed to withstand all kinds of loads
5. Intelligent battery management to prolong battery lifecycle
6. Redundant fan design and independent ventilation enhance durable operation under harsh environment
7. Adjustable battery numbers
8. Accept dual-mains input
9. Parallel operation with up to 4 units (option)
10.Variety of communication options available
Product discription:
The On-Line-Series is an uninterruptible power supply incorporating
double-converter technology. It provides perfect protection specifically for
strict load.
The double-converter principle eliminates all mains power
disturbances. A rectifier converts the alternating current from the socket
outlet to direct current. This direct current charges the batteries and powers
the inverter.
In the event of power failure, the maintenance-free batteries
power the inverter. Thus the inverter generates a sine wave AC power,
which permanently supplies the loads.
Designed with the proven on-line, double conversion architecture, this
series of UPS offers the greatest degree of availability in power protection
and provides continuous high-quality AC power to connect strict load,
especially for the basic equipments in some areas as: finance,
communication, government, traffic, manufacture, education and so on.
Additionally The UPS provides abundant interfaces such as RS232, SNMP, AS400, and RS485 for supervision and configure.
Specification:
* Product specifications are subject to change without further notice
Main Features:
1. Online double-conversion
2. DSP technology guarantees high reliability
3. True galvanic isolation transformer design
4. Control designed to withstand all kinds of loads
5. Intelligent battery management to prolong battery lifecycle
6. Redundant fan design and independent ventilation enhance durable operation under harsh environment
7. Adjustable battery numbers
8. Accept dual-mains input
9. Parallel operation with up to 4 units (option)
10.Variety of communication options available
Product discription:
The On-Line-Series is an uninterruptible power supply incorporating
double-converter technology. It provides perfect protection specifically for
strict load.
The double-converter principle eliminates all mains power
disturbances. A rectifier converts the alternating current from the socket
outlet to direct current. This direct current charges the batteries and powers
the inverter.
In the event of power failure, the maintenance-free batteries
power the inverter. Thus the inverter generates a sine wave AC power,
which permanently supplies the loads.
Designed with the proven on-line, double conversion architecture, this
series of UPS offers the greatest degree of availability in power protection
and provides continuous high-quality AC power to connect strict load,
especially for the basic equipments in some areas as: finance,
communication, government, traffic, manufacture, education and so on.
Additionally The UPS provides abundant interfaces such as RS232, SNMP, AS400, and RS485 for supervision and configure.
Specification:
| MODEL | GL33 10K | GL33 20K | GL33 30K | GL33 40K | GL33 60K | GL33 80K | |
| CAPACITY | 10KVA 8KW | 20KVA 16KW | 30KVA 24KW | 40KVA /32KW | 60KVA 48KW | 80KVA 64KW | |
| INPUT | |||||||
| Nominal Voltage | 3 x 380VAC/400VAC (3Ph + N) | ||||||
| Voltage Range | 305VAC ~ 460VAC | ||||||
| Frequency | 46-54Hz or 56-64Hz | ||||||
| INVERTER | |||||||
| Nominal Voltage | 3 x 380VAC/400VAC (3Ph + N) | ||||||
| Precision | Stationary: ±1%lusmn;1%lusmn;1% Transitory: ±5% (load variations 100-0-100%)0-0-100%)-0-100%) | ||||||
| Frequency | 50/60 Hz synchronised ±1 %usmn;1 %usmn;1 % With mains absent ±0.1 Hzmn;0.1 Hzn;0.1 Hz | ||||||
| Max. Synchronisation Speed | ±1 Hz/sn;1 Hz/sn;1 Hz/s | ||||||
| Waveform | Pure Sine wave | ||||||
| Total Harmonic Distortion (THDv) | <2% (Linear Load)oad) <5% (Non-linear Load)oad) | ||||||
| Phase Displacement | 120º ±1% (balanced load)alanced load)alanced load) 120º ±2% (imbalances 50% of the load) of the load) of the load) | ||||||
| Dynamic Recovery Time | 1 cycle at 98 % of the static value | ||||||
| Admissible Overload | 110% for 10min; 150% for 60sec ; ﹥160% for 200ms00ms | ||||||
| Admissible Crest Factor | 3:1 | ||||||
| Admissible Power Factor | 0.6~1 (inductive or capacitive) | ||||||
| Imbalance Output Voltage | <1% @ 100% Unbalanced LoadLoad | ||||||
| Current Limit | High overload, short-circuit: RMS Voltage Limit High Crest-Factor current: Peak Voltage Limit | ||||||
| STATIC BYPASS | |||||||
| Type | Solid state | ||||||
| Voltage | 3 x 380VAC/400VAC (3Ph + N) | ||||||
| Frequency | 50/60 Hz | ||||||
| Activation Criterion | Microprocessor control | ||||||
| Transfer Time | Zero | ||||||
| Admissible Overload | 150% for 1 hour; 180% for 30sec; ﹥200% for 200ms00ms | ||||||
| Transfer to Bypass | Immediate, for overloads above 160% | ||||||
| Retransfer | Automatic after alarm clear | ||||||
| MAINTENANCE BYPASS | |||||||
| Type | Without interruption | ||||||
| Voltage | 3 x 400V (3Ph + N) | ||||||
| Frequency | 50/60 Hz | ||||||
| Overall Efficiency | Line Mode | 90% | 91% | 92% | 93% | ||
| Battery Mode | 90% | 91% | 93% | 93% | |||
| BATTERY & CHARGERARGERARGER | |||||||
| Battery Type and Numbers | 16 pcs | 32 pcs (29~32 pcs adjustable) | |||||
| Nominal Battery Voltage | 192 VDC | 384 VDC (Based on 32pcs batteries) | |||||
| Charging Method | CC/CV | ||||||
| Precision | ±1%lusmn;1%lusmn;1% | ||||||
| Charging Current | Max.: 40 A | ||||||
| Charging Voltage | 216 VDC | 432 VDC (Based on 32pcs batteries) | |||||
| PHYSICAL | |||||||
| Dimensions(mm) | 656*405*817 | 656*405*941 | 840*432*1140 | 975*554*1286 | |||
| Net Weight (Kg) | 180 | 205 | 295 | 330 | 451 | 519 | |
