High Freuqncy Pure Sine Wave Online UPS 6kVA/10kVA
高精度纯正弦波在线UPS 6kVA / 10kVA
| 型号。 | EH5000系列 |
| 类型 | 线上 |
| 应用 | 行业 |
| 待机时间 | 长效机 |
| 输出容量 | 中型 |
| 牌 | 必须 |
| 产量 | 二百三十零分之二百二十○/ 240VAC |
| 工厂认证 | ISO9001 |
| 效率 | >90% |
| 功能1 | 冷链直接 |
| 商标 | 必须 |
| 规范 | CE |
| HS编码 | 8504402000 |
| 相 | 单相 |
| 保护 | 全面保护 |
| 分类 | 照明/动力 |
| 待机UPS | 正弦波输出UPS |
| 设备模式 | 集中模式 |
| 输入 | 110-300vac |
| 产品认证 | 策 |
| 为电脑 | RS232 |
| 功能 | N + X并行冗余 |
| 显示 | lcd + led |
| 运输包装 | 纸箱或木质包装 |
| 起源 | 中国 |
单相纯正弦波在线UPS 6kVA / 10kVA
A.单输出高达40kVA的并联单位
真正的N + 1冗余
C. DSP双转换在线正弦波设计
D.在线UPS具有输入功率因数校正功能
E.可热插拔的用户可更换电池
F. LCD显示屏，具有先进的监控功能，便于UPS管理
G.可编程50 / 60Hz频率转换
H.可选远程紧急关机（REPO）
在线UPS具有宽输入电压窗口
J.精密输出电压调节
K.在线UPS的保护是：优异的掉电，浪涌和瞬态保护ction
L.可选扩展电池组和充电器rgers
米rs-232c，usb＆可选snmp / http代理Agent
N.WINPOWER®UPS监控管理软件软件 Software
A.单输出高达40kVA的并联单位
真正的N + 1冗余
C. DSP双转换在线正弦波设计
D.在线UPS具有输入功率因数校正功能
E.可热插拔的用户可更换电池
F. LCD显示屏，具有先进的监控功能，便于UPS管理
G.可编程50 / 60Hz频率转换
H.可选远程紧急关机（REPO）
在线UPS具有宽输入电压窗口
J.精密输出电压调节
K.在线UPS的保护是：优异的掉电，浪涌和瞬态保护ction
L.可选扩展电池组和充电器rgers
米rs-232c，usb＆可选snmp / http代理Agent
N.WINPOWER®UPS监控管理软件软件 Software
| 模型 | eh5000，H6K | eh5000-h6ks | eh5000-h10k | eh5000-h10ks | |
| 容量 | 6000 va / 4200 w | 10000 va / 7000 w | |||
| 输入 | |||||
| 电压范围 | 低线路传输 | 176 VAC @ 100％负载/ 110 VAC @ 50％负载 | |||
| 低线回来 | 186 VAC @ 100％负载/ 120 VAC @ 50％负载 | ||||
| 高线路传输 | 300 vac | ||||
| 高线 | 290 vac | ||||
| 回来 | |||||
| 频率范围 | 46〜54Hz或56〜64Hz | ||||
| 相 | 单相接地 | ||||
| 功率因数 | ≥0.99 @ 100％负载load | ||||
| 产量 | |||||
| 交流电压调节（蝙蝠模式） | ±1％smn; 1％smn; 1 % | ||||
| 频率范围 | 46〜54Hz或56〜64Hz | ||||
| （同步范围） | |||||
频率范围 （蝙蝠模式） | 50 Hz±0.1 Hz或60 Hz±0.1 Hz±0.1 Hz 0.1 Hz± 0.1 Hz | ||||
| 当前峰值比率 | 3: 1 | ||||
| 谐波失真 | < = 3 % THD (Linear Load)/< = 6 % THD(Non-linear Load)r Load) | ||||
| 转移时间 | 交流直流 | 零 | |||
| 逆变器绕行 | 零 | ||||
| 波形（蝙蝠模式） | 纯正弦波 | ||||
| 效率 | |||||
| 到交流模式 | 89% | ||||
| 到电池模式 | 88% | ||||
| 电池 | |||||
| 电池类型 | 12 v / 7啊 | 取决于应用 | 12 v / 9啊 | 取决于应用 | |
| 数字 | 12 | 16 | 16 | 16 | |
| 典型充电时间 | 7小时恢复到90％的容量 | 取决于电池容量 | 9小时恢复到90％的容量 | 取决于电池容量 | |
| 充电电流（最大） | 1.0 A | 4.0 A | 1.0 A | 4.0 A | |
| 充电电压 | 273 vdc | 273 vdc | 273 vdc | 273 vdc | |
| 指标 | |||||
| 液晶面板 | UPS状态，负载电平，电池电量，输入/输出电压，放电定时器和故障条件 | ||||
| LED显示屏 | 十六个LED指示UPS状态，负载水平，电池电量，过载，故障和可编程插座 | ||||
| 报警 | |||||
| 电池模式 | 每4秒发声一次 | ||||
| 低电量 | 每秒响起 | ||||
| 超载 | 每秒发声两次 | ||||
| 故障 | 连续响起 | ||||
| 操作环境 | |||||
| 湿度 | 20-90％RH，0-40℃（非冷凝））sing) | ||||
| 噪音级别 | 1米以下小于55dB | 小于58dB @ 1米 | |||
| cmanagement | |||||
| 智能rs-232 / usb | 支持Windows®98/2000/2003 / XP / Vista / 2008，Windows®7，Linux和MAC以及MAC, and MAC | ||||
| 可选SNMP | 从SNMP管理器和Web浏览器进行电源管理 | ||||
| Model NO. | EH5000 series |
| Type | On-line |
| Application | Industry |
| Standby Time | Long-acting Machine |
| Output Capacity | Medium Type |
| Brand | Must |
| Output | 220/230/240VAC |
| Factory Certificaton | ISO9001 |
| Efficiency | >90% |
| Function 1 | Cold Stasrt Directly |
| Trademark | must |
| Specification | CE |
| HS Code | 8504402000 |
| Phase | Single Phase |
| Protection | Full Protection |
| Classification | Lighting/Power |
| Standby UPS | Sine Wave Output UPS |
| Equipment Mode | Centralized Model |
| Input | 110-300VAC |
| Products Certification | Ce |
| for Computer | RS232 |
| Function | N+X Parallel Redundancy |
| Display | LCD + LED |
| Transport Package | Carton or Wooden Packing |
| Origin | China |
Single Phase Pure Sine Wave Online UPS 6kVA/10kVA
A. Parallel Units with a Single Output of up to 40kVA
B. True N+1 Redundancy
C. DSP Double-Conversion On-line Sinewave Design
D. Online UPS has the Input Power Factor Correction function
E. Hot-Swappable User Replaceable Batteries
F. LCD Display with Advanced Monitoring for Easy UPS Management
G. Programmable 50/60Hz Frequency Conversion
H. Optional Remote Emergency Power Off (REPO)
I. Online UPS has the Wide Input Voltage Window
J. Precision Output Voltage Regulation
K. The protection of online UPS are: Superior Brownout, Surge & Transient Protectionctionction
L. Optional Extended Battery Banks & Chargersrgersrgers
M. RS-232C, USB & Optional SNMP/HTTP AgentAgentAgent
N. WINPOWER® UPS Monitoring & Management Software Software Software
A. Parallel Units with a Single Output of up to 40kVA
B. True N+1 Redundancy
C. DSP Double-Conversion On-line Sinewave Design
D. Online UPS has the Input Power Factor Correction function
E. Hot-Swappable User Replaceable Batteries
F. LCD Display with Advanced Monitoring for Easy UPS Management
G. Programmable 50/60Hz Frequency Conversion
H. Optional Remote Emergency Power Off (REPO)
I. Online UPS has the Wide Input Voltage Window
J. Precision Output Voltage Regulation
K. The protection of online UPS are: Superior Brownout, Surge & Transient Protectionctionction
L. Optional Extended Battery Banks & Chargersrgersrgers
M. RS-232C, USB & Optional SNMP/HTTP AgentAgentAgent
N. WINPOWER® UPS Monitoring & Management Software Software Software
| Model | EH5000-H6K | EH5000-H6KS | EH5000-H10K | EH5000-H10KS | |
| CAPACITY | 6000 VA / 4200 W | 10000 VA / 7000 W | |||
| INPUT | |||||
| Voltage Range | Low Line Transfer | 176 VAC @ 100% load / 110 VAC @ 50% load | |||
| Low Line Comeback | 186 VAC @ 100% load / 120 VAC @ 50% load | ||||
| High Line Transfer | 300 VAC | ||||
| High Line | 290 VAC | ||||
| Comeback | |||||
| Frequency Range | 46~54 Hz or 56~64 Hz | ||||
| Phase | Single phase with ground | ||||
| Power Factor | ≥ 0.99 @ 100% loadloadload | ||||
| OUTPUT | |||||
| AC Voltage Regulation (Bat. Mode) | ± 1 %smn; 1 %smn; 1 % | ||||
| Frequency Range | 46~54 Hz or 56~64 Hz | ||||
| (Synchronized Range) | |||||
Frequency Range (Bat. Mode) | 50 Hz ± 0.1 Hz or 60 Hz ± 0.1 Hz± 0.1 Hz 0.1 Hz± 0.1 Hz | ||||
| Current Crest Ratio | 3: 1 | ||||
| Harmonic Distortion | < = 3 % THD (Linear Load)/< = 6 % THD(Non-linear Load)r Load) | ||||
| Transfer Time | AC to DC | Zero | |||
| Inverter to Bypass | Zero | ||||
| Waveform(Bat. Mode) | Pure Sine Wave | ||||
| EFFICIENCY | |||||
| To AC Mode | 89% | ||||
| To Battery Mode | 88% | ||||
| BATTERY | |||||
| Battery Type | 12 V / 7 AH | Depending on applications | 12 V / 9 AH | Depending on applications | |
| Numbers | 12 | 16 | 16 | 16 | |
| Typical Recharge Time | 7 hours recover to 90% capacity | Depending on battery capacity | 9 hours recover to 90% capacity | Depending on battery capacity | |
| Charging Current (max. ) | 1.0 A | 4.0 A | 1.0 A | 4.0 A | |
| Charging Voltage | 273 VDC | 273 VDC | 273 VDC | 273 VDC | |
| INDICATORS | |||||
| LCD Panel | UPS status, Load level, Battery level, Input/Output voltage, Discharge timer, and Fault conditions | ||||
| LED Display | Sixteen LEDs indicating UPS status, Load level, Battery level, overload, fault, and programmable outlet | ||||
| ALARM | |||||
| Battery Mode | Sounding every 4 seconds | ||||
| Low Battery | Sounding every second | ||||
| Overload | Sounding twice every second | ||||
| Fault | Continuously sounding | ||||
| OPERATING ENVIRONMENT | |||||
| Humidity | 20-90 % RH @ 0- 40° C (non-condensing)sing)sing) | ||||
| Noise Level | Less than 55dB @ 1 Meter | Less than 58dB @ 1 Meter | |||
| CMANAGEMENT | |||||
| Smart RS-232/USB | Supports Windows® 98/2000/2003/XP/Vista/2008, Windows® 7, Linux, and MAC, and MAC, and MAC | ||||
| Optional SNMP | Power management from SNMP manager and web browser | ||||
