功能强大，性价比高的控制模块
控制器是用作直流发电厂重要神经中枢的监控单元。您可以从优雅的前面板操作系统，使用四个前按键和LCD显示屏。它们代表您与系统之间的主要界面。
应用
CAN总线通讯
控制器有两个CAN总线通讯接口。一个允许该单元支持与每个整流器的专用通信信道，从而提供更多的功能和更大的灵活性。另一个用于与其他智能设备通信，如智能电表。
模块化设计
控制器的可扩展性非常灵活。可以添加连接到CAN总线的附加单元，以提供扩展功能和增加测量点数量。因此，可以设置和升级系统组件，以满足任何量身定制的电源解决方案的需求。
产品描述
控制器是一个功能强大，性价比高的模块，用于监控和控制各种直流电源系统，您还可以通过PC使用PC背景软件在本地操作系统，或通过RS232，以太网和Web远程操作系统。该模块然后利用以太网或RS-232端口与本地PC，SNMP或Web适配器进行接口。
主要特征
前面板LCD和按钮，用于无PC的现场服务。
前面板以太网或RS-232接口，用于本地PC连接或通过PC后台软件，Web或SNMP进行远程监控和控制。
8个用户可编程继电器输出，用于传统的远程监
6个用户可编程输入，用于现场监控其他设备
电池监控和测试，无需现场考勤
温度补偿充电，延长电池寿命
电池寿命指示
电池中点电压检测
受密码保护的操作员访问级别
具有时间和日期的报警/事件日志
基于Windows的PC通信软件
附加技术规格
远程监控
从运行PowerSuite的PC
安装在远程计算机上的基于Windows的通信程序，可以通过以太网网络监控和控制系统。
使用报警继电器（无电压触点）
8个内部故障安全报警继电器提供无电压触点，可以连接到用于传统报警监控的设备
本地监测与控制
从运行后台软件的PC上
基于Windows的通信软件还可以通过以太网或RS-232电缆与控制器进行通信。
LCD和四个键盘进行本地操作
如果任何报警（主要或次要）被激活，前面板上的（红色或黄色）LED指示灯亮起，LCD中会显示报警文本，并且相应的报警继电器被激活。
在正常操作中，前置LCD将显示输出电压，电池电流，负载电流和充电模式。
特征
系统
输出电压测量
总负载电流测量
负载/电池断开
报警级别设置（主要/​​次要）
报警记录（最多50个当前报警，200个历史报警和512个历史事件）
实时时钟备用电源可以支持72小时的掉电
网站文字/ ID
继电器输出测试
电压电平设置
数据记录（最多200个数据点）
电池
电池电流测量
电池温度测量（可选）
电池测试（根据排放表或设定时间限制）
电池测试信息（10次最新测试）
设置电池数据
电池分路设置
电池质量指示
电池升压充电
电池电缆电压降补偿
温度补偿充电
防止温度探头故障

Powerful and cost effective control module
The controller is a monitoring and control unit used as the vital nerve center of the DC power plant. You operate the system from the elegant front panel, using four front keys and the LCD-display. They represent the main interface between you and the system.
Applications
CAN bus communication
The controller has two CAN bus communication interface. One allows the unit to support dedicated communication channel with each rectifier, providing for increased number of functions and greater flexibility. Another is used to communicate with other smart devices, such as smart meters.
Modular design
The controller is extremely flexible in its expandability. Additional units connected to the CAN bus can be added to provide extended functionality and increased number of measuring points. Accordingly, system components can be set up and upgraded to meet the demand of any tailor-made power solution.
Product Description
The controller is a powerful and cost-effective module, developed for monitoring and controlling a wide range of DC power supply systems, You can also operate the system locally via a PC using the PC background software, or remotely via RS232, Ethernet and the Web. The module then utilizes the Ethernet or RS-232 ports to interface with a local PC, SNMP or Web adapters.
Key Features
Front panel LCD and buttons for on-site service without PC.
Front panel Ethernet or RS-232 interface for PC connection locally or remote monitoring and control via PC background software, web or SNMP.
8 user programmable relay outputs for traditional remote monitoring
6 user programmable inputs for monitoring of other equipment on site
Battery monitoring and testing without site attendance
Temperature compensated charging for increased battery lifetime
Battery lifetime indication
Battery middle-point voltage detection
Password protected operator access levels
Alarm/event log with time and date
Windows-based PC communication software
Additional Technical Specifications
Remote Monitoring and Control
From a PC running PowerSuite
A Windows-based communication program installed on a remote computer, the system can be monitored and controlled via Ethernet network.
Using alarm relays (voltage free contacts)
8 internal failsafe alarm relays provide voltage free contacts that can be connected to equipment used for traditional alarm monitoring
Local Monitoring and Control
From a PC running background software
A Windows-based communication software, can also communicate with the controller through an Ethernet or RS-232 cable.
LCD and four keypads for local operations
If any alarm (major or minor) is activated, a (red or yellow) LED is lit in the front panel, the alarm text appears in the LCD and the corresponding alarm relay is activated.
In normal operation, the front LCD will display the output voltage, battery current, load current and charge mode.
Features
System
Output Voltage Measurement
Total Load Current Measurement
Load/Battery Disconnect
Alarm Level Settings (major / minor)
Alarm Log (up to 50 current alarms, 200 history alarms and 512 history events)
Real Time Clock backup power can support 72 hours when the power-down
Site Text/ID
Test of Relay Outputs
Voltage Level setup
Data logging (up to 200 data points)
Battery
Battery Current Measurement
Battery Temperature Measurement (optional)
Battery Testing (acc. To discharge table or set time limit)
Battery Test Information (10 latest tests)
Setup of Battery Data
Battery shunt setup
Battery quality indication
Battery Boost Charging
Battery Cable Voltage Drop Compensation
Temperature Compensated Charging
Protection against Temperature Probe Failure