Online UPS 1-10kv Must
在线UPS 1-10kv必须
| 型号。 | eh5110 |
| 类型 | 线上 |
| 应用 | 安全/监控/报警 |
| 待机时间 | 标准机 |
| 输出容量 | 中型 |
| 牌 | 必须或OEM |
| 输入电压 | 115-300vac |
| 频率 | 高频 |
| 商标 | 必须或OEM品牌 |
| 起源 | 中国 |
| 相 | 单相 |
| 保护 | 过压保护 |
| 分类 | 照明/动力 |
| 待机UPS | 正弦波输出UPS |
| 设备模式 | 分散 |
| 充电电流 | 1安培（4.5安培） |
| 转移时间 | 0 |
| 容量 | 1-6kva |
| 规范 | iso，ce， |
| HS编码 | 8504402000 |
网上上线1-10kv必须
主要特点：
真正的在线双转换技术，具有先进的微处理器控制
2.输入电压范围宽
3.液晶显示
零转移时间
5.防止所有类型的电源问题
6.启动UPS时进行自检
7.现场布线故障警告
8.电池开机功能
智能RS232通讯接口
10.智能插槽可用
密封铅酸，免维护电池
主要特点：
真正的在线双转换技术，具有先进的微处理器控制
2.输入电压范围宽
3.液晶显示
零转移时间
5.防止所有类型的电源问题
6.启动UPS时进行自检
7.现场布线故障警告
8.电池开机功能
智能RS232通讯接口
10.智能插槽可用
密封铅酸，免维护电池
产品系列 | 机架1〜6kVA | ||||
模型 | RT-C1K | RT-C2KS | RT-C3KS | RT-c6ks | |
额定功率 | VA / W | 1kva / 0.7kw | 2kva / 1.4kw | 3kva / 2.1kw | 6KVA /4.2千瓦 |
输入 | 标称电压 | 220VAC | |||
电压范围 | 115〜300vac | 176〜276vac | |||
频率范围 | 46〜54Hz（默认），用户可在40〜60Hz范围内调节 | 46〜54Hz | |||
功率因数 | 0.97 | 0.98 | |||
连接 | IEC320-10A入口 | IEC320-16A入口 | 接线端子 | ||
产量 | 电压 | 220VAC±2％usmn; 2％usmn; 2% | 220VAC±1％usmn; 1％usmn; 1% | ||
频率 | 46〜54Hz或50Hz±0.2Hz（线路模式）ne模式）ne mode) 50Hz±0.2Hz（电池模式）ry模式）ry mode) | 46〜54Hz（线路模式） 50Hz±0.05Hz（电池模式）ry模式）ry mode) | |||
波形 | 正弦波 | ||||
过载能力 | 108％〜150％30秒，³150％，300 ms300 ms300 ms | 105％〜130％10分钟，³130％1分钟1分钟。1 min. | |||
当前峰值比率 | 3: 1 | ||||
旁路 | 自动转账 | 过载和UPS故障 | |||
UPS上电前 | 默认为“否”，用户可调整为“是”为“是”; YES" | 是 | |||
电压范围 | 80〜264VAC（默认），用户可在80〜286VAC范围内调节 | 176〜261vac | |||
输出连接 | iec320 -10a * 4 | iec320-10a * 4 | iec320-10a和 接线端子 | IEC320-10A * 4和接线端子 | |
转移时间 | 0 ms;从变频器到旁路小于4 ms，反之亦然 | 零 | |||
LED指示灯 | 状态 | 负载水平/电池电量，电池，公用电源，变频器，旁路，过载，故障 | |||
声音报警 | 旁路，电池模式，电池电量不足，过载，故障 | ||||
通讯 | RS-232串行接口 | ||||
智能槽; 选项：webpower snmp /网卡，as400卡或winpower cmc） | |||||
网络浪涌保护 | RJ45 I / O端口可用于网络或传真/调制解调器 | ||||
环境的 | 工作温度 | 0〜40℃ Ceg; C | |||
工作湿度 | 20〜90％无冷凝 | ||||
主单位 | 净重/公斤） | 15.3 | 10.3 | 11.2 | 18.3 |
尺寸（宽x高x高）mm | 482.6 x 450 x 88（2U） | 482.6 x 600 x 130（3U） | |||
电池组 | 类型 | 内部电池 | 外置电池组 | ||
额定直流电压 | 36VDC | 96VDC | 240VDC | ||
备份时间（满载） | 5分钟 | 9分钟 （含1 BP） | 5分钟 （含1 BP） | 7分钟 （含1 BP） | |
净重/公斤） | -- | 25.3 | 58.2 | ||
尺寸（宽x高x高）mm | -- | 482.6 x 450 x 88（2U） | 482.6 x 600 x 130（3U） | ||
| Model NO. | EH5110 |
| Type | On-line |
| Application | Security / Monitoring / Alarm |
| Standby Time | Standard Machine |
| Output Capacity | Medium Type |
| Brand | Must or OEM |
| Input Voltage | 115-300VAC |
| Frequency | High Frequency |
| Trademark | MUST or OEM brand |
| Origin | China |
| Phase | Single Phase |
| Protection | Overvoltage |
| Classification | Lighting/Power |
| Standby UPS | Sine Wave Output UPS |
| Equipment Mode | Decentralized |
| Charge Current | 1AMP(4.5AMP) |
| Transfer Time | 0 |
| Capacity | 1-6kVA |
| Specification | ISO, CE, |
| HS Code | 8504402000 |
Online UPS 1-10kv MUST
Main features:
1. True on-line double conversion technology with advanced microprocessor control
2. Wide input voltage range
3. LCD display
4. Zero transfer time
5. Protection against all type of power problems
6. Self test while start of the UPS
7. Site wiring fault warning
8. On-battery power-on function
9. Smart RS232 communication interface
10. Intelligent slot available
Sealed lead-acid, maintenance free battery
Main features:
1. True on-line double conversion technology with advanced microprocessor control
2. Wide input voltage range
3. LCD display
4. Zero transfer time
5. Protection against all type of power problems
6. Self test while start of the UPS
7. Site wiring fault warning
8. On-battery power-on function
9. Smart RS232 communication interface
10. Intelligent slot available
Sealed lead-acid, maintenance free battery
Product Series | Rack Mount 1~6kVA | ||||
Model | RT-C1K | RT-C2KS | RT-C3KS | RT-C6KS | |
Rated Power | VA/W | 1kVA / 0.7kW | 2kVA / 1.4kW | 3kVA / 2.1kW | 6kVA/4.2kW |
Input | Nominal Voltage | 220VAC | |||
Voltage Range | 115 ~ 300VAC | 176 ~ 276VAC | |||
Frequency Range | 46 ~ 54Hz(default), user adjustable within 40~60Hz | 46 ~ 54Hz | |||
Power Factor | 0.97 | 0.98 | |||
Connection | IEC320-10A inlet | IEC320-16A inlet | Terminal Block | ||
Output | Voltage | 220VAC ± 2%usmn; 2%usmn; 2% | 220VAC ± 1%usmn; 1%usmn; 1% | ||
Frequency | 46~54Hz or 50Hz ± 0.2Hz (Line mode)ne mode)ne mode) 50Hz ± 0.2Hz ( Battery mode)ry mode)ry mode) | 46~54Hz (Line mode) 50Hz ± 0.05Hz ( Battery mode)ry mode)ry mode) | |||
Waveform | Sine Wave | ||||
Overload Capability | 108%~150% for 30 sec., ³ 150% for 300 ms300 ms300 ms | 105%~130% for 10 min., ³ 130% for 1 min.1 min.1 min. | |||
Current Crest Ratio | 3: 1 | ||||
Bypass | Automatic Transfer | on overload and UPS failure | |||
Before UPS Power-on | Default ' NO' , user adjustable to ' YES'e to " YES"; YES" | Yes | |||
Voltage Range | 80~264VAC (Default), user adjustable within 80~286VAC | 176 ~ 261VAC | |||
Output Connections | IEC320 -10A * 4 | IEC320-10A * 4 | IEC320-10A and Terminal Block | IEC320-10A * 4 and Terminal Block | |
Transfer Time | 0 ms; less than 4 ms from inverter to bypass and vice versa | Zero | |||
LED indicators | Status | Load level / Battery level, Battery, Utility Power, Inverter, Bypass, Overload, Fault | |||
Audible Alarm | Bypass, On battery mode, Battery low, Overload, Fault | ||||
Communications | RS-232 Serial Interface | ||||
Intelligent Slot; OPTIONS: WEBPOWER SNMP/WEB card, AS400 card or WinPower CMC) | |||||
Network Surge Protection | RJ45 I/O port available for network or Fax/Modem | ||||
Environmental | Operating Temperature | 0 ~ 40° Ceg; Ceg; C | |||
Operating Humidity | 20 ~ 90% non-condensing | ||||
Main Unit | Net Weight (Kg) | 15.3 | 10.3 | 11.2 | 18.3 |
Dimensions (W x D x H) mm | 482.6 x 450 x 88 (2U) | 482.6 x 600 x 130 (3U) | |||
Battery Pack | Type | Internal Batteries | External Battery Pack | ||
Nominal DC Voltage | 36VDC | 96VDC | 240VDC | ||
Backup Time (Full load) | 5 min | 9 min (with 1 BP) | 5 min (with 1 BP) | 7 min (with 1 BP) | |
Net Weight (Kg) | -- | 25.3 | 58.2 | ||
Dimensions (W x D x H) mm | -- | 482.6 x 450 x 88 (2U) | 482.6 x 600 x 130 (3U) | ||
