FOR NEW Mercury 175 HP VERADO 4-Stroke Outboard Engine
新的Mercury 175 HP VERADO 4冲程舷外发动机
Mercury 175HP VERADO 4冲程舷外发动机
前轴额定功率（HP / kW）175/129
最大rpm（wot）5800-6400
气缸/结构直式4，16阀直动式双顶置凸轮（DOHC）
排量（CID / cc）105.7 / 1732
排量升/ CID 1.7 / 105.7
孔径＆amp;冲程（in）3.23×3.23
孔径＆行程（mm）82 x 82
压缩比为8.35:1
燃油进气系统SmartCraft DTS电子油门，增压带增压空气冷却和
电子增压压力控制
燃油系统计算机控制顺序多端口电子燃油喷射（EFI）
燃料需求无铅普通87辛烷最低（R + M / 2）
乙醇耐受性高达10％
点火系统SmartCraft PCM 07数字感应
充电系统完全调节带式驱动70安培（882瓦特）
启动电（Turn-key）
排气系统
冷却系统水冷采用恒温器和压力控制
润滑系统集成干式油底壳
石油需求NMMA认证FCW SAE 25W-40
油容量 - 夸脱（Qts。）6.3
油容量 - 升（l）6
发动机管理系统SmartCraft PCM 07
发动机控制系统SmartCraft数字节气门（DTS）
发动机保护系统SmartCraft发动机保护
换档SmartCraft DTS，F-N-R
齿轮比2.08：1
轴长（英寸）20/25
轴长（mm）508/635
反向旋转在25'（CXL）型号上可用
修剪系统使用SmartCraft可编程倾斜功率调整和倾斜
最大倾斜范围73°（-5°至68°）
最大微调范围20°（-5°至15°）
转向液压或电动液压动力转向器，使用标准的汞通用气缸
SmartCraft兼容
重量（lbs / kg）510/231
前轴额定功率（HP / kW）175/129
最大rpm（wot）5800-6400
气缸/结构直式4，16阀直动式双顶置凸轮（DOHC）
排量（CID / cc）105.7 / 1732
排量升/ CID 1.7 / 105.7
孔径＆amp;冲程（in）3.23×3.23
孔径＆行程（mm）82 x 82
压缩比为8.35:1
燃油进气系统SmartCraft DTS电子油门，增压带增压空气冷却和
电子增压压力控制
燃油系统计算机控制顺序多端口电子燃油喷射（EFI）
燃料需求无铅普通87辛烷最低（R + M / 2）
乙醇耐受性高达10％
点火系统SmartCraft PCM 07数字感应
充电系统完全调节带式驱动70安培（882瓦特）
启动电（Turn-key）
排气系统
冷却系统水冷采用恒温器和压力控制
润滑系统集成干式油底壳
石油需求NMMA认证FCW SAE 25W-40
油容量 - 夸脱（Qts。）6.3
油容量 - 升（l）6
发动机管理系统SmartCraft PCM 07
发动机控制系统SmartCraft数字节气门（DTS）
发动机保护系统SmartCraft发动机保护
换档SmartCraft DTS，F-N-R
齿轮比2.08：1
轴长（英寸）20/25
轴长（mm）508/635
反向旋转在25'（CXL）型号上可用
修剪系统使用SmartCraft可编程倾斜功率调整和倾斜
最大倾斜范围73°（-5°至68°）
最大微调范围20°（-5°至15°）
转向液压或电动液压动力转向器，使用标准的汞通用气缸
SmartCraft兼容
重量（lbs / kg）510/231
Mercury 175HP VERADO 4-Stroke Outboard Engine
Propshaft Rated Horsepower (HP / kW) 175/129
Max RPM (WOT) 5800-6400
Cylinder/Configuration Straight 4, 16-valve direct acting double overhead cam (DOHC)
Displacement (CID/cc) 105.7/1732
Displacement Liter/CID 1.7/105.7
Bore & Stroke (in) 3.23 x 3.23
Bore & Stroke (mm) 82 x 82
Compression Ratio 8.35:1
Fuel Induction System SmartCraft DTS electronic throttle, supercharged with charge air cooling and
electronic boost pressure control
Fuel System Computer controlled Sequential Multi-Port Electronic Fuel Injection (EFI)
Fuel Requirements Unleaded Regular 87 Octane Minimum (R+M/2)
Ethanol Tolerance Up to 10%
Ignition System SmartCraft PCM 07 Digital Inductive
Charging System Fully regulated belt driven 70-amp (882 watt)
Starting Electric (Turn-key)
Exhaust System Through Prop
Cooling System Water cooled with thermostat & pressure control
Lubrication System Integrated dry sump
Oil Requirement NMMA Certified FCW SAE 25W-40
Oil Capacity - Quarts (qts.) 6.3
Oil Capacity - Liters (l) 6
Engine Management System SmartCraft PCM 07
Engine Control System SmartCraft Digital Throttle & Shift (DTS)
Engine Protection System SmartCraft Engine Guardian
Gear Shift SmartCraft DTS, F-N-R
Gear Ratio 2.08:1
Shaft Length (inches) 20/25
Shaft Length (mm) 508/635
Counter Rotation Available on 25' (CXL) models
Trim System Power trim & tilt with SmartCraft programmable tilt
Maximum Tilt Range 73° (-5° to 68°)
Maximum Trim Range 20° (-5° to 15°)
Steering Hydraulic or electro-hydraulic power steering available using standard Mercury universal cylinder
SmartCraft Compatible
Weight (lbs / kg) 510/231
Propshaft Rated Horsepower (HP / kW) 175/129
Max RPM (WOT) 5800-6400
Cylinder/Configuration Straight 4, 16-valve direct acting double overhead cam (DOHC)
Displacement (CID/cc) 105.7/1732
Displacement Liter/CID 1.7/105.7
Bore & Stroke (in) 3.23 x 3.23
Bore & Stroke (mm) 82 x 82
Compression Ratio 8.35:1
Fuel Induction System SmartCraft DTS electronic throttle, supercharged with charge air cooling and
electronic boost pressure control
Fuel System Computer controlled Sequential Multi-Port Electronic Fuel Injection (EFI)
Fuel Requirements Unleaded Regular 87 Octane Minimum (R+M/2)
Ethanol Tolerance Up to 10%
Ignition System SmartCraft PCM 07 Digital Inductive
Charging System Fully regulated belt driven 70-amp (882 watt)
Starting Electric (Turn-key)
Exhaust System Through Prop
Cooling System Water cooled with thermostat & pressure control
Lubrication System Integrated dry sump
Oil Requirement NMMA Certified FCW SAE 25W-40
Oil Capacity - Quarts (qts.) 6.3
Oil Capacity - Liters (l) 6
Engine Management System SmartCraft PCM 07
Engine Control System SmartCraft Digital Throttle & Shift (DTS)
Engine Protection System SmartCraft Engine Guardian
Gear Shift SmartCraft DTS, F-N-R
Gear Ratio 2.08:1
Shaft Length (inches) 20/25
Shaft Length (mm) 508/635
Counter Rotation Available on 25' (CXL) models
Trim System Power trim & tilt with SmartCraft programmable tilt
Maximum Tilt Range 73° (-5° to 68°)
Maximum Trim Range 20° (-5° to 15°)
Steering Hydraulic or electro-hydraulic power steering available using standard Mercury universal cylinder
SmartCraft Compatible
Weight (lbs / kg) 510/231
