12.1" Patient Monitor (MFX-3000A)
12.1'患者监护仪（MFX-3000A）
议价
加入意向| 型号。 | MFX-3000A |
| 类型 | 患者/胎儿/母亲监护仪 |
| Hr测量范围 | 20bpm，250bpm |
| 反应测量范围 | 不小于0次/ Min-100次/ min |
| 起源 | 中国山东 |
| 分类 | 诊断和监测设备的生理功能 |
| 证明 | ce，iso13485 |
| SpO2范围 | 0%-100% |
| 商标 | Medfar |
MFX-3000A可选ETCO2便携式病人监护仪（图1-1）适用于成人，儿科和新生儿使用。它可以监测心电图，呼吸频率，SpO2，NIBP，TEMP和IBP的重要信号。它将参数测量模块，显示和录像机集成在一个设备中，具有紧凑，轻便和便携性。可更换的内置电池有助于患者的运输。大型高分辨率显示屏可以清楚地看到9个波形和全部监视参数
提供广泛的功能，如视觉和听觉报警，存储和报告打印输出趋势数据，NIBP测量和报警事件，并提供药物剂量计算功能eithereither
组件详细信息
屏幕：12.1'TFT显示屏
可以在相同的位置显示五个波形。从上到下的波形是：ECG，ECG II，SpO2 Plethysmogram，RESP（可能来自ECG模块）。要显示的波形是用户可选择的。有关详细信息，请参阅跟踪波形选择。
可以保存记录数据72小时
按钮功能
显示器的所有操作都通过按钮和屏幕底部的旋钮。按钮的名称位于它们的上方
提供广泛的功能，如视觉和听觉报警，存储和报告打印输出趋势数据，NIBP测量和报警事件，并提供药物剂量计算功能eithereither
组件详细信息
屏幕：12.1'TFT显示屏
可以在相同的位置显示五个波形。从上到下的波形是：ECG，ECG II，SpO2 Plethysmogram，RESP（可能来自ECG模块）。要显示的波形是用户可选择的。有关详细信息，请参阅跟踪波形选择。
可以保存记录数据72小时
按钮功能
显示器的所有操作都通过按钮和屏幕底部的旋钮。按钮的名称位于它们的上方
| 技术规格 | |
| 显示：12.1'TFTt; TFT | |
| 留言区 | 消息区位于屏幕的顶部，显示监视器的操作状态和患者的状态 |
| 波形区域 | 可以同时显示四个波形。从上到下的波形是：ECG I，ECG II，SpO2 Plethysmogram，RESP（可能来自ECG模块）。用户可以选择要显示的宽高比。有关详细信息，请参阅跟踪W曲线选择 |
| 参数区 | 这些参数每秒刷新一次，除非NIBP值在每次测量结束时刷新。 用户可以选择监视器参数，屏幕显示将相应改变 |
| 报警指示灯 | 在正常模式下，无指示灯亮起。 报警模式下，报警指示灯亮起或闪烁 |
| 监测 | |
| 心电图 | 心率（HR）; 2通道心电图W aveforms; S-T段分析;心律失常（可选） |
| RESP | 呼吸频率（PR）;呼吸方式 |
| 血氧饱和度 | 氧饱和度（Spo2）脉搏率（PR）SpO2体积描记图 |
| 血压 | 收缩压（NS），舒张压（ND），平均压（NM） |
| TEM | 温度数据 |
| 心电图 | |
| 标准引线 | RA;拉RL;二; v |
| 业绩增长 | 0.25; 0.5; 1; 2; （4档可调） |
| 工作模式 | 丹尼（应该是> 90db）0db） 监控;操作（应该> 109db）9db） |
| 保护 | 抗震;反ESU |
| 电极损耗说明 | 新村 |
| 小时 | |
| 测量范围 | 20bpm，250bpm |
| 报警范围 | 上：22bpm-250bpm;较低：20bpm- 248 bpm |
| 血氧 | |
| 范围 | 0%- 100% |
| 报警范围 | 上涨：70％ - 100％;低：0％ - 99％ |
| RESP | |
| 测量范围 | 不小于0时间，最小 - 100次/分钟 |
| 显示 | 波形和呼吸速率 Rate |
| PR | |
| 测量范围 | 不低于30bpm - 250bpm |
| 温度 | |
| 测量范围 | 不低于28ºC-43.2ºC43.2ºCrdm;C43.2ºC |
| 报警范围 | 上限：0.2ºC - 50ºC;低：0ºC-49.8ºcºc-49.8ºc.8 ºCºC- 49.8 ºC |
| 血压 | |
| 测量模式 | Manu，Auto，STAT |
| 测量范围 | 收缩压：50 mmHg〜240 mmHg |
| 平均血压：25mmHg〜200mmHg | |
| 舒张压：15 mmHg〜180 mmHg | |
| 报警范围 | 收缩压：上：52 mmHg〜250 mmHg;低：50mmHg〜248mmHg |
| 平均血压：上：22mmHg〜230mmHg;低：20mmHg〜228mmHg | |
| 舒张压：上：17 mmHg〜180 mmHg;低：15 mmHg〜178 mmHg | |
| 可选的 | RESP; 2- tem p; ETCO2;网络 |
| 报警 | |
| 声光报警，报警必须根据个别病人的不同情况进行设置。确保在发生报警时可以激活音频声音 | |
| Model NO. | MFX-3000A |
| Type | Patient/Fetal/Maternal Monitor |
| Hr Measure Range | 20bpm-250bpm |
| Resp Measure Range | Not Less Than 0 Time/Min-100 Times/Min |
| Origin | Shandong, China |
| Classification | Physiological Functions of Diagnosis and Monitoring Equipment |
| Certification | CE, ISO13485 |
| SpO2 Range | 0%-100% |
| Trademark | Medfar |
MFX-3000A optional ETCO2 Portable Patient Monitor (Figure 1-1) is adaptable to adult, pediatric and neonatal usage. It can monitor vital signals as ECG, Respiratory Rate, SpO2, NIBP, TEMP and IBP. It integrates parameter measuring modules, display and recorder in one device, featuring in compactness, lightweight and portability. Replaceable built-in battery facilitates transportation of patient. Large high-resolution display provides clear view of 9 waveforms and full monitoring parameters
provides extensive functions as visual & audible alarm, storage and report printout for trend data, NIBP measurements, and alarm events, and drug dose calculation function is provided eithereitherither
Component details
Screen: 12.1' TFT displayisplay
five waveforms can be displayed at the same tiem. The waveforms from top to bottom are: ECG, ECG II, SpO2 Plethysmogram, RESP (possible coming from ECG module). Waveforms to be displayed are user-selectable. Refer to Tracing Waveforms Selection for details.
Can keep recording data for 72 hours
Button function
All the operations to the monitor are through the buttons and a knob at the bottom of the screen. The name of the buttons are above them
provides extensive functions as visual & audible alarm, storage and report printout for trend data, NIBP measurements, and alarm events, and drug dose calculation function is provided eithereitherither
Component details
Screen: 12.1' TFT displayisplay
five waveforms can be displayed at the same tiem. The waveforms from top to bottom are: ECG, ECG II, SpO2 Plethysmogram, RESP (possible coming from ECG module). Waveforms to be displayed are user-selectable. Refer to Tracing Waveforms Selection for details.
Can keep recording data for 72 hours
Button function
All the operations to the monitor are through the buttons and a knob at the bottom of the screen. The name of the buttons are above them
| Techniques Specification | |
| Display: 12.1' TFTt; TFT | |
| Message area | The Message Area is at top of the screen displaying operating state of the monitor and status of the patient |
| waveform area | Four waveforms can be displayed at the same time. The waveforms from top to bottom are: ECG I, ECG II, SpO2 Plethysmogram, RESP (possibly coming from ECG module). W aveforms to be displayed are user-selectable. Refer to Tracing W aveforms Selection for details |
| Parameter Area | The parameters refresh every second, except that NIBP values refresh each time the measurement is over. User can select the monitor parameters, and the screen display will change accordingly |
| Alarm indicator | In normal mode, no indicator lights. In alarm mode, the alarm indicator lights or flashes |
| Monitoring of | |
| ECG | Heart Rate( HR); 2 Channel ECG W aveforms; S-T Segment analysis ; Arrhythmia ( Optional) |
| RESP | Respiratory Rate (PR); Respiration W aveform |
| Spo2 | Oxygen Saturation ( Spo2) Pulse Rate ( PR) SpO2 Plethysmogram |
| NIBP | Systolic Pressure (NS), Diastolic Pressure (ND), Mean Pressure (NM) |
| TEM | Temperature DATA |
| ECG | |
| Standard Leads | RA.; LA ; RL; LL ; V |
| performance gains | 0.25 ; 0.5; 1 ; 2; (4 gears adjustable) |
| Working Mode | Dagnose ; ( It should be ﹥90db)0db) Monitoring; Operation ( It should be ﹥109db)9db) |
| Protection | Anti shock; Anti-ESU |
| Instruction of Electrode loss | Ves |
| HR | |
| Measure Range | 20bpm-250bpm |
| Alarm Range | Up: 22bpm-250bpm ; Lower: 20bpm- 248 bpm |
| SPO2 | |
| Range | 0%- 100% |
| Alarm Range | Up: 70 % - 100% ; Low: 0% - 99% |
| RESP | |
| Measure Range | Not less than 0 timel min- 100 timesl min |
| Display | Waveforms & Breathing Rate Rate Rate |
| PR | |
| Measure Range | Not less than 30bpm - 250bpm |
| TEMP | |
| Measure Range | Not less than 28ºC -43.2ºC43.2ºCrdm;C43.2ºC |
| Alarm Range | Up: 0.2ºC - 50ºC ; Low: 0ºC- 49.8 ºCºC- 49.8 ºC.8 ºCºC- 49.8 ºC |
| NIBP | |
| Measure Mode | Manu, Auto, STAT |
| Measuring range | systolic pressure: 50 mmHg ~ 240 mmHg |
| mean blood pressure:25 mmHg ~ 200 mmHg | |
| diastolic pressure:15 mmHg ~ 180 mmHg | |
| Alarm Range | systolic pressure:Up: 52 mmHg ~ 250 mmHg ; Low: 50 mmHg ~ 248 mmHg |
| mean blood pressure:Up: 22 mmHg ~ 230 mmHg ; Low: 20 mmHg ~ 228 mmHg | |
| diastolic pressure:Up: 17 mmHg ~ 180 mmHg ; Low: 15 mmHg ~ 178 mmHg | |
| Optional | RESP; 2- TEM P; ETCO2; NETWORK |
| Alarm | |
| sound-light alarm, Alarm must be set up according to different situation of individual patient. Make sure that audio sounds can be activated when alarm occurs | |
