代号：qbd018，qbd019，qbd005
包括：
1.穿刺装置 - 由医疗级白色ABS制成，带或不带空气
进口，3或4孔尺寸符合ISO8536-4标准。
2.保护帽由PP或PE制成。
3.滴水室 - 由PVC制成，尺寸符合ISO8536-4标准，长4.5cm-7cm。
4.流体过滤器 - 支撑由ABS或PE制成，尼龙网，网眼尺寸：15微米。
5.进气口盖由红，白，蓝色的PP制成
6.防水过滤器-PP支撑，疏水过滤纸，由
丙烯酸树脂和尼龙。
7.流量调节器 - 由PP或ABS制成，形状正常，体积小或带角形，体积大。
8.注射部位 - 乳胶锥，橡胶锥，合成橡胶锥，Y现场制造的硬质透明PVC +注射部位由天然或合成橡胶制成。
软管 - 软质PVC，3X4mm，150cm
长度或根据要求进行调整。
10.端子连接器：由PE，PVC，路厄锁或鲁尔滑块制成。
11.组件装配：用溶剂环己酮粘合
规格：适用于硬容器和软袋（不含
进气口型）
无菌，无毒，无热原，由EOG灭菌。
证书：CE，ISO9002，EN46002

Code No.: QBD018, QBD019, QBD005
Consist of:
1. Piercing device-Made of medical grade white ABS, with or without air
Inlet, 3 or 4 holes size according to ISO8536-4 standard.
2. Protective cap-Made of PP or PE.
3. Drip chamber-Made of soft PVC, size according to ISO8536-4 Standards, 4.5cm-7cm in length.
4. Fluid filter-Support is made of ABS or PE, nylon net, mesh size: 15 micron.
5. Air inlet-Cap is made of red, white, or blue PP
6. Water-repellent filter-PP support, hydrophobic filtering paper, made of
Acrylic resin and nylon.
7. Flow regulator-Made of PP or ABS, normal shape, small size or Horned shape, large size.
8. Injection site-Latex cone, rubber cone, synthetic rubber cone, Y Site-made of hard transparent PVC+injection site made of natural or Synthetic rubber.
9. Soft tubing-Made of soft medical grade PVC, 3X4mm, 150cm in
Length, or adjust according to requirements.
10. Terminal connector: Made of PE, PVC, luer lock or luer slip.
11. Components assembly: By gluing with solvent cyclohexanone
Specification: They are suited to hard containers and soft bags( without
Air inlet type)
Sterile, non-toxic, pyrogen free, sterilized by EOG.
Certificate: CE, ISO9002, EN46002