Medical Infusion Set
医疗输液器
议价
加入意向| 型号。 | qbd018-Y-F |
| 商标 | OEM / ODM |
| 起源 | 中国 |
| 类型 | 输液器 |
| 规范 | ce，iso，gmp |
| HS编码 | 90183900 |
产品描述
产品：一。五。解决方案管理套件。
代号：qbd018 qbd019 qbd020 qbd002 qbd005 qbc4
包括：
1.穿刺装置 - 由医疗级白色ABS制成，带或不带空气
进口，3或4孔尺寸符合ISO8536-4标准。
2.保护帽 - 由PP或PE制成。
3.滴水室 - 由PVC制成，尺寸符合ISO8536-4标准
标准，长4.5厘米至7厘米。
4.流体过滤器 - 支撑由ABS或PE制成，尼龙网，网眼尺寸：15微米。
5.进气口 - 帽子由红色，白色或蓝色PP制成
6.防水过滤器-PP支撑，疏水过滤纸，由
丙烯酸树脂和尼龙。
7.流量调节器 - 由PP或ABS制成，形状正常，体积小或有角
形状大，尺寸大。
8.注射部位 - 乳胶锥，橡胶锥，合成橡胶锥，Y位置 -
由硬质透明PVC +注射部位制成，天然或合成
橡胶。
9.软管 - 软质PVC，直径3X4mm，
长150厘米，或根据要求调整...
10.端子连接器：由PE，PVC，路厄锁或鲁尔滑块制成。
11.组件装配：用溶剂环己酮粘合
规范：
它们适用于硬容器和软袋（不带进气口）
无菌，无毒，无热原，由EOG灭菌。
包装：
1PC /吸塑包装20PCS / MID。 PE袋，20袋/ CTN纸箱尺寸根据具体体积变化产品。 （体积达到腔体尺寸，管长度，不同部件）
1PC /聚乙烯袋（HDPE，LDPE，复合膜），20PCS / MID。 PE袋，20bags / CTN，纸箱尺寸根据产品规格变化。
备注：您也可以给我们您的具体要求，以确认您最终需要的产品。
产品：一。五。解决方案管理套件。
代号：qbd018 qbd019 qbd020 qbd002 qbd005 qbc4
包括：
1.穿刺装置 - 由医疗级白色ABS制成，带或不带空气
进口，3或4孔尺寸符合ISO8536-4标准。
2.保护帽 - 由PP或PE制成。
3.滴水室 - 由PVC制成，尺寸符合ISO8536-4标准
标准，长4.5厘米至7厘米。
4.流体过滤器 - 支撑由ABS或PE制成，尼龙网，网眼尺寸：15微米。
5.进气口 - 帽子由红色，白色或蓝色PP制成
6.防水过滤器-PP支撑，疏水过滤纸，由
丙烯酸树脂和尼龙。
7.流量调节器 - 由PP或ABS制成，形状正常，体积小或有角
形状大，尺寸大。
8.注射部位 - 乳胶锥，橡胶锥，合成橡胶锥，Y位置 -
由硬质透明PVC +注射部位制成，天然或合成
橡胶。
9.软管 - 软质PVC，直径3X4mm，
长150厘米，或根据要求调整...
10.端子连接器：由PE，PVC，路厄锁或鲁尔滑块制成。
11.组件装配：用溶剂环己酮粘合
规范：
它们适用于硬容器和软袋（不带进气口）
无菌，无毒，无热原，由EOG灭菌。
包装：
1PC /吸塑包装20PCS / MID。 PE袋，20袋/ CTN纸箱尺寸根据具体体积变化产品。 （体积达到腔体尺寸，管长度，不同部件）
1PC /聚乙烯袋（HDPE，LDPE，复合膜），20PCS / MID。 PE袋，20bags / CTN，纸箱尺寸根据产品规格变化。
备注：您也可以给我们您的具体要求，以确认您最终需要的产品。
| Model NO. | QBD018-Y-F |
| Trademark | OEM/ODM |
| Origin | China |
| Type | Infusion Set |
| Specification | CE, ISO, GMP |
| HS Code | 90183900 |
Product Description
Products: I. V. Solution Administration Sets.
Code No.: QBD018 QBD019 QBD020 QBD002 QBD005 QBC4
Consist of:
1. Piercing device--Made of medical grade white ABS, with or without air
Inlet, 3 or 4 holes size according to ISO8536-4 standard.
2. Protective cap--Made of PP or PE.
3. Drip chamber--Made of soft PVC, size according to ISO8536-4
Standards, 4.5cm--7cm in length.
4. Fluid filter--Support is made of ABS or PE, nylon net, mesh size: 15 micron.
5. Air inlet--Cap is made of red, white, or blue PP
6. Water-repellent filter-PP support, hydrophobic filtering paper, made of
Acrylic resin and nylon.
7. Flow regulator--Made of PP or ABS, normal shape, small size or horned
Shape, large size.
8. Injection site--Latex cone, rubber cone, synthetic rubber cone, Y site-
Made of hard transparent PVC+injection site made of natural or synthetic
Rubber.
9. Soft tubing--Made of soft medical grade PVC, diameter 3X4mm,
150cm in length, or adjust according to requirements...
10. Terminal connector: Made of PE, PVC, luer lock or luer slip.
11. Components assembly: By gluing with solvent cyclohexanone
Specification:
They are suited to hard containers and soft bags( without air inlet type)
Sterile, non-toxic, pyrogen free, sterilized by EOG.
Packing:
1PC/blister package 20PCS/MID. PE bag, 20 bags/CTN carton size changes according to the specific volume of products. (volume is up to Chamber size, tube length, different components)
1PC/polybag (HDPE, LDPE, compound film), 20PCS/MID. PE bag, 20bags/CTN, carton size changes according to the specific volume of Products.
Remark: You can also give us your specific requirements to confirm the products you need finally.
Products: I. V. Solution Administration Sets.
Code No.: QBD018 QBD019 QBD020 QBD002 QBD005 QBC4
Consist of:
1. Piercing device--Made of medical grade white ABS, with or without air
Inlet, 3 or 4 holes size according to ISO8536-4 standard.
2. Protective cap--Made of PP or PE.
3. Drip chamber--Made of soft PVC, size according to ISO8536-4
Standards, 4.5cm--7cm in length.
4. Fluid filter--Support is made of ABS or PE, nylon net, mesh size: 15 micron.
5. Air inlet--Cap is made of red, white, or blue PP
6. Water-repellent filter-PP support, hydrophobic filtering paper, made of
Acrylic resin and nylon.
7. Flow regulator--Made of PP or ABS, normal shape, small size or horned
Shape, large size.
8. Injection site--Latex cone, rubber cone, synthetic rubber cone, Y site-
Made of hard transparent PVC+injection site made of natural or synthetic
Rubber.
9. Soft tubing--Made of soft medical grade PVC, diameter 3X4mm,
150cm in length, or adjust according to requirements...
10. Terminal connector: Made of PE, PVC, luer lock or luer slip.
11. Components assembly: By gluing with solvent cyclohexanone
Specification:
They are suited to hard containers and soft bags( without air inlet type)
Sterile, non-toxic, pyrogen free, sterilized by EOG.
Packing:
1PC/blister package 20PCS/MID. PE bag, 20 bags/CTN carton size changes according to the specific volume of products. (volume is up to Chamber size, tube length, different components)
1PC/polybag (HDPE, LDPE, compound film), 20PCS/MID. PE bag, 20bags/CTN, carton size changes according to the specific volume of Products.
Remark: You can also give us your specific requirements to confirm the products you need finally.
