Infant Radiant Warmer-Medical Equipment (HNT-1000)
婴儿辐射加温器 - 医疗设备（HNT-1000）
| 型号。 | HNT-1000 |
| 证明 | ce，iso13485 |
| 医疗器械监管类型 | 类型2 |
| 伺服控制模式 | 气温 |
| 声音/视觉警报 | 温度偏差，传感器故障，电源故障，Te |
| 皮肤温度传感器测量范围 | 20℃〜42℃立方厘米〜42℃g;cc~42°c |
| 床可倾倒 | 连续可调±10°lusmn; 10°eg;lusmn;10° |
| 温度控制模式 | 汽车 |
| 商标 | Healicom |
| 起源 | 中国 |
| 类型 | 婴儿辐射保暖 |
| 组 | 婴儿 |
| 医疗器械注册/记录号 | Jyjxz20122260356 |
| 即时参数显示 | 设定温度，皮肤温度，热功率 |
| X光片盒托盘 | 婴儿床下 |
| 皮肤传感器精度 | ≤0.3°C0.3℃下g;c0.3°c |
| 环境空气流速 | <0.3m/S.3m/S |
| 包装尺寸 | 110×90×110Cm，85Kgs; 110Cm，85Kg;110 Cm,85 Kg |
| 规范 | 异 |
| HS编码 | 90189090 |
标准组成
1.伺服控制模式：空气温度
2.即时参数显示：设定温度，皮肤温度，热功率;
3.听觉/视觉报警：温度偏差，传感器故障，电源故障，临时超控;
倾斜床与旋转辐射头
婴儿床上的X光片盒托盘，高照度的检查灯
6.使用防爆石英红外线管作为辐射加热源。
技术规格
1.伺服控制模式：空气温度
2.即时参数显示：设定温度，皮肤温度，热功率;
3.听觉/视觉报警：温度偏差，传感器故障，电源故障，临时超控;
倾斜床与旋转辐射头
婴儿床上的X光片盒托盘，高照度的检查灯
6.使用防爆石英红外线管作为辐射加热源。
技术规格
| 功率 | 型号bnt-1000-1e | ac 110/120 v，50hz / 60hz | |||
| 型号bnt-1000-2e | ac 220 / 240v，50hz / 60hz | ||||
| 输入功率 | ≤1000va00va00VA | ||||
| 温度控制范围和相关规格 | 控制模式 | 自动模式 | |||
| 温度控制范围 | 25℃〜37℃C.37℃。g;C.37°C. | ||||
| 皮肤温度传感器测量范围 | 20℃〜42℃〜42℃下eg;C~42°C | ||||
| 传感器测量温度与控制温度之间的偏差 | ≤0.5°C.5℃下eg;C.5°C | ||||
| 皮肤传感器精度 | ≤0.3°C.3℃下eg;C.3°C | ||||
| 床面温度均匀 | ≤1℃; 1℃eg;C;1°C | ||||
| 升温时间 | ≤45min5min5min | ||||
| 床可倾斜 | 持续可调，±10°um; 10°deg;usmn;10° | ||||
| 报警 | 传感器故障报警 | 当传感器开路，短路或断开时，会发出声音和视觉报警，切断电源。 | |||
| 过温报警 | 当显示温度接近38°C时，带有声音和视觉报警; C。eg;C. | ||||
| 偏差报警 | 温度平衡后，当显示温度高于或低于控制温度1°C时，带有可视和视觉报警，如果高于1°C则切断电源。 1℃。g;C. 1°C. | ||||
| 电源故障报警 | 电源故障时带有可视和视觉报警 | ||||
| 环境温度（这是一个建议，请不要在允许环境之外使用。） | 操作温度范围 | 18℃〜30℃〜30℃下eg;C~30°C | |||
| 存放温度范围 | -20℃〜+ 55℃，+ 55℃eg;C+55°C | ||||
| 环境湿度 | 操作湿度范围 | 30％RH〜75％RH | |||
| 存放湿度范围 | ≤93％RH3％RH3%RH | ||||
| 气压 | 运输和存储大气压力范围 | 北半球500hPa〜1060hPa | |||
| 操作大气压力范围 | 700hPa〜1060hPa | ||||
| 流速度 | 环境流速度 | ≤0.3m/ S3M / s的3m/s | |||
| 产品规格 | HNT-1000 | HNT-2000 | HNT-2000B |
| 作业条件： | |||
| 环境温度 | + 18℃〜+ 30℃+ 30℃eg;C+30°C | + 18℃〜+ 30℃+ 30℃eg;C+30°C | + 18℃〜+ 30℃+ 30℃eg;C+30°C |
| 环境相对湿度 | 30%~75% | 30%~75% | 30%~75% |
| 环境空气流速 | <0.3m/s3m/s | <0.3m/s3m/s | <0.3m/s3m/s |
| 电力需求 | ≤1000va00va00VA | ≤1000va00va00VA | ≤1000va00va00VA |
| 温度控制模式 | 汽车 | 预热/自动和手动 | 预热/自动和手动 |
| 温度控制范围 | 25℃〜37℃〜37℃下eg;C~37°C | 25℃〜37℃〜37℃下eg;C~37°C | 25℃〜37℃〜37℃下eg;C~37°C |
| 温度覆盖模式为 | ----- | 38°CDEG; C ^deg;C | 38°CDEG; C ^deg;C |
| 温度传感器精度 | ≤0.3°C.3℃下eg;C.3°C | ≤0.3°C.3℃下eg;C.3°C | ≤0.3°C.3℃下eg;C.3°C |
| 床垫温度均匀 | ≤2.0°C.0℃下eg;C.0°C | ≤2.0°C.0℃下eg;C.0°C | ≤2.0°C.0℃下eg;C.0°C |
| 升温时间 | ≤45分钟 min | ≤45分钟 min | ≤45分钟 min |
| 热输出指示 | 0~100% | 0~100% | 0~100% |
| 辐射箱水平角度调节范围 | 0〜±90°步lesseg;无级eg;step-less | 0〜±90°步进减速;无级g; step-less | 0〜±90°步进减速;无级g; step-less |
| 床垫托盘尺寸 | 68厘米×56cmes;56厘米es;56cm | 68厘米×56cmes;56厘米es;56cm | 68厘米×56cmes;56厘米es;56cm |
| 床垫倾斜调节范围 | 0〜±10°step-lessg;无级g; step-less | 0〜±10°step-lessg;无级g; step-less | 0〜±10°step-lessg;无级g; step-less |
| 床垫托盘最大加载 | 10公斤 | 10公斤 | 10公斤 |
| 输血杆最大加载 | 2公斤 | 2公斤 | 2公斤 |
| 货架最大加载 | 2公斤 | 2公斤 | 2公斤 |
| X-射线 | 是 | 是 | 是 |
| RS-232连接器 | ---- | 是 | 是 |
| 床垫到辐射箱 | 81厘米 | 81厘米 | 81厘米 |
| 加热器红外波长 | 1〜3微米; mmu;m | 1〜3微米; mmu;m | 1〜3微米; mmu;m |
| 阿帕计时器 | ----- | 是 | 是 |
| 警报 | |||
| 电源故障报警 | 是 | 是 | 是 |
| 传感器故障报警 | 是 | 是 | 是 |
| 温度偏差报警 | ±1.0°CMN; 1.0℃eg;Cmn;1.0°C | ±1.0°CMN; 1.0℃eg;Cmn;1.0°C | ±1.0°CMN; 1.0℃eg;Cmn;1.0°C |
| 过温报警 | ≤38.0°C.0℃下eg;C.0°C | ≤38.0℃/≤39.0℃/≤39.0℃下0°C/≤39.0°C | ≤38.0℃/≤39.0℃/≤39.0℃下0°C/≤39.0°C |
| 系统故障报警 | ----- | 是 | 是 |
| 低压抽吸 | ------ | ----- | 是 |
| 压力调节范围 | ------ | ---- | 0〜22Kp（0〜165mmHg） |
| 操作噪音 | ------ | ---- | ≤55dB55dB55dB |
| 白色光疗灯 | ------ | ------ | 1套 |
| 7L氧气瓶（带氧气压力计和氧气流量计）eter）eter) | ------ | ------ | 2套 |
| 新生儿复苏袋 | ------ | ------ | 1套 |
| 包装尺寸 | 110×90×110厘米×110厘米110 cm×110 cm | 110×90×110厘米×110厘米110 cm×110 cm | 110×90×110厘米×110厘米110 cm×110 cm |
| 净重 | 85公斤 | 85公斤 | 95公斤 |
| 总重量 | 115公斤 | 115公斤 | 125公斤 |
| Model NO. | HNT-1000 |
| Certification | CE, ISO13485 |
| Medical Device Regulatory Type | Type 2 |
| Servo Control Mode | Air Temperature |
| Audible/Visual Alarms | Temp Deviation, Sensor Failure, Power Failure, Te |
| Skin Temperature Sensor Measure Range | 20°c~42°cc~42°cg;cc~42°c |
| Bed Tiltable | Continues Adjustable in ±10°lusmn;10°eg;lusmn;10° |
| Temperature Control Mode | Auto |
| Trademark | Healicom |
| Origin | China |
| Type | Infant Radiant Warmer |
| Group | Infant |
| Medical Devices Reg./Record No. | Jyjxz20122260356 |
| Instant Parameter Display | Set Temp, Skin Temp, Heat Power Rate |
| X-ray Cassette Tray | Under Infant Bed |
| Skin Sensor Precision | ≤0.3°c0.3°cg;c0.3°c |
| Environment Air Velocity of Flow | <0.3m/S.3m/S |
| Packing Size | 110×90×110 Cm,85 Kgs;110 Cm,85 Kg;110 Cm,85 Kg |
| Specification | ISO |
| HS Code | 90189090 |
Standard composition
1. Servo Control Mode: air temperature
2. Instant Parameter Display: set temp, skin temp, heat power rate;
3. Audible/Visual Alarms: temp deviation, sensor failure, power failure, temp override;
4. Tilting Bed with Rotary Radiant Head
5. X-ray Cassette Tray under infant bed, examination light of high illuminance
6. Use anti-blast quartz infrared tube as radiant heating source.
Technical specification
1. Servo Control Mode: air temperature
2. Instant Parameter Display: set temp, skin temp, heat power rate;
3. Audible/Visual Alarms: temp deviation, sensor failure, power failure, temp override;
4. Tilting Bed with Rotary Radiant Head
5. X-ray Cassette Tray under infant bed, examination light of high illuminance
6. Use anti-blast quartz infrared tube as radiant heating source.
Technical specification
| Power | Model BNT-1000-1E | AC 110 / 120 V, 50Hz / 60Hz | |||
| Model BNT-1000-2E | AC 220 / 240V, 50Hz / 60Hz | ||||
| Input Power | ≤1000VA00VA00VA | ||||
| Temperature control range and relative specification | Control mode | Auto mode | |||
| Temperature control range | 25°C~37°C.37°C.g;C.37°C. | ||||
| Skin temperature sensor measure range | 20°C~42°C~42°Ceg;C~42°C | ||||
| Deviation between sensor measure temperature and control temperature | ≤0.5°C.5°Ceg;C.5°C | ||||
| Skin Sensor Precision | ≤0.3°C.3°Ceg;C.3°C | ||||
| Bed surface temperature Uniformity | ≤1°C;1°Ceg;C;1°C | ||||
| Temperature Rise Time | ≤45min5min5min | ||||
| Bed tiltable | continues adjustable in ±10°usmn;10°deg;usmn;10° | ||||
| Alarm | Sensor failure alarm | Alarm with audible and visual when sensor open circuit, short circuit or disconnect, cut off power. | |||
| Over temperature alarm | Alarm with audible and visual when displayed temperature was approach 38°C.eg;C.eg;C. | ||||
| Deviation alarm | After temperature equilibrium, alarm with audible and visual when displayed temperature was 1°C above or below control temperature, cut off power if above 1°C. 1°C.g;C. 1°C. | ||||
| Power failure alarm | Alarm with audible and visual when power failure | ||||
| Environment Temperature (It is a suggestion that please do not use outside of the allow environment.) | Operate temperature range | 18°C~30°C~30°Ceg;C~30°C | |||
| Store temperature range | -20°C~+55°C+55°Ceg;C+55°C | ||||
| Environment Humidity | Operate humidity range | 30%RH~75%RH | |||
| Store humidity range | ≤93%RH3%RH3%RH | ||||
| Atmospheric pressure | Transport and Store atmospheric pressure range | 500hPa~1060hPa | |||
| Operate atmospheric pressure range | 700hPa~1060hPa | ||||
| Stream velocity | Ambit environment stream velocity | ≤0.3m/s3m/s3m/s | |||
| Specifications | HNT-1000 | HNT-2000 | HNT-2000B |
| Operational condition: | |||
| Environment temperature | +18°C~+30°C+30°Ceg;C+30°C | +18°C~+30°C+30°Ceg;C+30°C | +18°C~+30°C+30°Ceg;C+30°C |
| Environment relative humidity | 30%~75% | 30%~75% | 30%~75% |
| Environment air velocity of flow | <0.3m/s3m/s | <0.3m/s3m/s | <0.3m/s3m/s |
| Power requirement | ≤1000VA00VA00VA | ≤1000VA00VA00VA | ≤1000VA00VA00VA |
| Temperature control mode | Auto | Pre-heat/auto and manual | Pre-heat/auto and manual |
| Temperature Control Range | 25°C~37°C~37°Ceg;C~37°C | 25°C~37°C~37°Ceg;C~37°C | 25°C~37°C~37°Ceg;C~37°C |
| Temperature override mode to | ----- | 38°Cdeg;Cdeg;C | 38°Cdeg;Cdeg;C |
| Temperature sensor accuracy | ≤0.3°C.3°Ceg;C.3°C | ≤0.3°C.3°Ceg;C.3°C | ≤0.3°C.3°Ceg;C.3°C |
| Mattress temperature uniformity | ≤2.0°C.0°Ceg;C.0°C | ≤2.0°C.0°Ceg;C.0°C | ≤2.0°C.0°Ceg;C.0°C |
| Temperature rise time | ≤45 min min min | ≤45 min min min | ≤45 min min min |
| Heat output indicate | 0~100% | 0~100% | 0~100% |
| Radiant box horizon angle adjust range | 0~±90°step-lesseg;step-lesseg;step-less | 0~±90° step-lessg; step-lessg; step-less | 0~±90° step-lessg; step-lessg; step-less |
| Mattress Tray Size | 68cm×56cmes;56cmes;56cm | 68cm×56cmes;56cmes;56cm | 68cm×56cmes;56cmes;56cm |
| Mattress tilt adjust range | 0~±10° step-lessg; step-lessg; step-less | 0~±10° step-lessg; step-lessg; step-less | 0~±10° step-lessg; step-lessg; step-less |
| Mattress tray Max. load | 10 kg | 10 kg | 10 kg |
| Transfusion pole Max. load | 2 kg | 2 kg | 2 kg |
| Shelf Max. load | 2 kg | 2 kg | 2 kg |
| X-ray | Yes | Yes | Yes |
| RS-232 Connector | ---- | Yes | Yes |
| Mattress to Radiant box | 81 cm | 81 cm | 81 cm |
| Heater infrared wavelength | 1~3 μmmu;mmu;m | 1~3 μmmu;mmu;m | 1~3 μmmu;mmu;m |
| APGAR Timer | ----- | Yes | Yes |
| Alarms | |||
| Power failure alarm | Yes | Yes | Yes |
| Sensor failure alarm | Yes | Yes | Yes |
| Temperature deviation alarm | ±1.0°Cmn;1.0°Ceg;Cmn;1.0°C | ±1.0°Cmn;1.0°Ceg;Cmn;1.0°C | ±1.0°Cmn;1.0°Ceg;Cmn;1.0°C |
| Over temperature alarm | ≤38.0°C.0°Ceg;C.0°C | ≤38.0°C/≤39.0°C/≤39.0°C0°C/≤39.0°C | ≤38.0°C/≤39.0°C/≤39.0°C0°C/≤39.0°C |
| System failure alarm | ----- | Yes | Yes |
| Low-pressure suction | ------ | ----- | Yes |
| Pressure adjust range | ------ | ---- | 0~22Kp(0~165mmHg) |
| Operating noise | ------ | ---- | ≤55dB55dB55dB |
| White Phototherapy light | ------ | ------ | 1 set |
| 7L Oxygen cylinder (with oxygen manometer & oxygen flow meter)eter)eter) | ------ | ------ | 2 sets |
| Neonate resuscitation bag | ------ | ------ | 1 set |
| Packing size | 110×90×110 cm×110 cm110 cm×110 cm | 110 ×90 ×110 cm×110 cm110 cm×110 cm | 110 ×90 ×110 cm×110 cm110 cm×110 cm |
| Net weight | 85 kg | 85 kg | 95 kg |
| Gross Weight | 115 kg | 115 kg | 125 kg |
