Infant Incubator Medical Infant Radiant Warmer

婴儿保育箱医疗婴儿辐射保温箱

1-1300 USD

译文
原文

型号。	HNT-1000A
证明	ce，iso13485
环境空气流速	<0.3m/S.3m/S
新生儿复苏袋	1套
7L氧气瓶（含氧气体）	2套
运行噪音	≤55db;55分贝55db
商标	Healicom
规范	异
HS编码	90189090
理论	婴儿辐射保暖
温度控制模式	预热/自动和手动
温度控制范围	25℃〜37℃立方厘米〜37℃下g;cc~37°c
辐射箱水平角度调节范围	0〜±90°Step-Lesseg;无级g; Step-Less
压力调节范围	0〜22kp（0〜165mmhg）
白色光疗灯	1套
运输包装	木头箱子
起源	中国

标准组成
1.伺服控制模式：空气温度
2.即时参数显示：设定温度，皮肤温度，热功率;
3.听觉/视觉报警：温度偏差，传感器故障，电源故障，临时超控;
倾斜床与旋转辐射头
婴儿床上的X光片盒托盘，高照度的检查灯
6.使用防爆石英红外线管作为辐射加热源。
技术规格

功率	型号bnt-1000a-1e		ac 110/120 v，50hz / 60hz
	型号bnt-1000a-2e		ac 220 / 240v，50hz / 60hz
	输入功率		≤1000va00va00VA
温度控制范围和相关规格	控制模式			自动模式
	温度控制范围			25℃〜37℃C.37℃。g;C.37°C.
	皮肤温度传感器测量范围			20℃〜42℃〜42℃下eg;C~42°C
	传感器测量温度与控制温度之间的偏差			≤0.5°C.5℃下eg;C.5°C
	皮肤传感器精度			≤0.3°C.3℃下eg;C.3°C
	床面温度均匀			≤1℃; 1℃eg;C;1°C
	升温时间			≤45min5min5min
	床可倾斜			持续可调，±10°um; 10°deg;usmn;10°
报警	传感器故障报警	当传感器开路，短路或断开时，会发出声音和视觉报警，切断电源。
	过温报警	当显示温度接近38°C时，带有声音和视觉报警; C。eg;C.
	偏差报警	温度平衡后，当显示温度高于或低于控制温度1°C时，带有可视和视觉报警，如果高于1°C则切断电源。 1℃。g;C. 1°C.
	电源故障报警	电源故障时带有可视和视觉报警
环境温度（这是一个建议，请不要在允许环境之外使用。）	操作温度范围				18℃〜30℃〜30℃下eg;C~30°C
	存放温度范围				-20℃〜+ 55℃，+ 55℃eg;C+55°C
环境湿度	操作湿度范围				30％RH〜75％RH
	存放湿度范围				≤93％RH3％RH3%RH
气压	运输和存储大气压力范围				北半球500hPa〜1060hPa
	操作大气压力范围				700hPa〜1060hPa
流速度	环境流速度				≤0.3m/ S3M / s的3m/s

采用低压抽吸机

Model NO.	HNT-1000A
Certification	CE, ISO13485
Environment Air Velocity of Flow	<0.3m/S.3m/S
Neonate Resuscitation Bag	1 Set
7L Oxygen Cylinder (with Oxygen Manomete	2 Sets
Operating Noise	≤55db;55db55db
Trademark	Healicom
Specification	ISO
HS Code	90189090
Theory	Infant Radiant Warmer
Temperature Control Mode	Pre-Heat/Auto and Manual
Temperature Control Range	25°c~37°cc~37°cg;cc~37°c
Radiant Box Horizon Angle Adjust Range	0~±90° Step-Lesseg; Step-Lessg; Step-Less
Pressure Adjust Range	0~22kp(0~165mmhg)
White Phototherapy Light	1 Set
Transport Package	Wooden Case
Origin	China

Standard composition
1. Servo Control Mode: air temperature
2. Instant Parameter Display: set temp, skin temp, heat power rate;
3. Audible/Visual Alarms: temp deviation, sensor failure, power failure, temp override;
4. Tilting Bed with Rotary Radiant Head
5. X-ray Cassette Tray under infant bed, examination light of high illuminance
6. Use anti-blast quartz infrared tube as radiant heating source.
Technical specification

Power	Model BNT-1000A-1E		AC 110 / 120 V, 50Hz / 60Hz
	Model BNT-1000A-2E		AC 220 / 240V, 50Hz / 60Hz
	Input Power		≤1000VA00VA00VA
Temperature control range and relative specification	Control mode			Auto mode
	Temperature control range			25°C~37°C.37°C.g;C.37°C.
	Skin temperature sensor measure range			20°C~42°C~42°Ceg;C~42°C
	Deviation between sensor measure temperature and control temperature			≤0.5°C.5°Ceg;C.5°C
	Skin Sensor Precision			≤0.3°C.3°Ceg;C.3°C
	Bed surface temperature Uniformity			≤1°C;1°Ceg;C;1°C
	Temperature Rise Time			≤45min5min5min
	Bed tiltable			continues adjustable in ±10°usmn;10°deg;usmn;10°
Alarm	Sensor failure alarm	Alarm with audible and visual when sensor open circuit, short circuit or disconnect, cut off power.
	Over temperature alarm	Alarm with audible and visual when displayed temperature was approach 38°C.eg;C.eg;C.
	Deviation alarm	After temperature equilibrium, alarm with audible and visual when displayed temperature was 1°C above or below control temperature, cut off power if above 1°C. 1°C.g;C. 1°C.
	Power failure alarm	Alarm with audible and visual when power failure
Environment Temperature (It is a suggestion that please do not use outside of the allow environment.)	Operate temperature range				18°C~30°C~30°Ceg;C~30°C
	Store temperature range				-20°C~+55°C+55°Ceg;C+55°C
Environment Humidity	Operate humidity range				30%RH~75%RH
	Store humidity range				≤93%RH3%RH3%RH
Atmospheric pressure	Transport and Store atmospheric pressure range				500hPa~1060hPa
	Operate atmospheric pressure range				700hPa~1060hPa
Stream velocity	Ambit environment stream velocity				≤0.3m/s3m/s3m/s

With Intra-low-pressure suction machine