Hnt-1000A Medical Infant Radiant Warmer
Hnt-1000A医疗婴儿辐射保温瓶
| 型号。 | HNT-1000A |
| 液晶显示器 | 无液晶显示 |
| 控制模式 | 自动模式 |
| 证书 | ISO，CE |
| 输入功率 | ≤1000va000va00va |
| 规范 | ce，iso |
| HS编码 | 90189090 |
| 证明 | ce，iso13485 |
| 组 | 孩子 |
| 皮肤温度传感器测量范围 | 20℃〜42℃立方厘米〜42℃g;cc~42°c |
| 关键词 | 婴儿辐射保暖 |
| 商标 | Healicom |
| 起源 | 中国 |
标准组成
伺服控制模式：空气温度
即时参数显示：设定温度，皮肤温度，热功率;
声音/视觉报警：温度偏差，传感器故障，电源故障，临时超控;
带旋转辐射头的倾斜床
婴儿床上的X光片盒托盘，高照度的检查灯
使用防爆石英红外线管作为辐射加热源。
技术规格
功率 | 型号bnt-1000-1e | ac 110/120 v，50hz / 60hz | |||
型号bnt-1000-2e | ac 220 / 240v，50hz / 60hz | ||||
输入功率 | ≤1000va00va00VA | ||||
温度控制范围和相关规格 | 控制模式 | 自动模式 | |||
温度控制范围 | 25℃〜37℃C.37℃。g;C.37°C. | ||||
皮肤温度传感器测量范围 | 20℃〜42℃〜42℃下eg;C~42°C | ||||
传感器测量温度与控制温度之间的偏差 | ≤0.5°C.5℃下eg;C.5°C | ||||
皮肤传感器精度 | ≤0.3°C.3℃下eg;C.3°C | ||||
床面温度均匀 | ≤1℃; 1℃eg;C;1°C | ||||
升温时间 | ≤45min5min5min | ||||
床可倾斜 | 持续可调，±10°um; 10°deg;usmn;10° | ||||
报警 | 传感器故障报警 | 当传感器开路，短路或断开时，会发出声音和视觉报警，切断电源。 | |||
过温报警 | 当显示温度接近38°C时，带有声音和视觉报警; C。eg;C. | ||||
偏差报警 | 温度平衡后，当显示温度高于或低于控制温度1°C时，带有可视和视觉报警，如果高于1°C则切断电源。 1℃。g;C. 1°C. | ||||
电源故障报警 | 电源故障时带有可视和视觉报警 | ||||
环境温度（这是一个建议，请不要在允许环境之外使用。） | 操作温度范围 | 18℃〜30℃〜30℃下eg;C~30°C | |||
存放温度范围 | -20℃〜+ 55℃，+ 55℃eg;C+55°C | ||||
环境湿度 | 操作湿度范围 | 30％RH〜75％RH | |||
存放湿度范围 | ≤93％RH3％RH3%RH | ||||
气压 | 运输和存储大气压力范围 | 北半球500hPa〜1060hPa | |||
操作大气压力范围 | 700hPa〜1060hPa | ||||
流速度 | 环境流速度 | ≤0.3m/ S3M / s的3m/s | |||
地下：低压抽吸机
| Model NO. | HNT-1000A |
| LCD Display | Without LCD Display |
| Control Mode | Auto Mode |
| Certificate | ISO,CE |
| Input Power | ≤1000va000va00va |
| Specification | CE, ISO |
| HS Code | 90189090 |
| Certification | CE, ISO13485 |
| Group | Children |
| Skin Temperature Sensor Measure Range | 20°c~42°cc~42°cg;cc~42°c |
| Keyword | Infant Radiant Warmer |
| Trademark | Healicom |
| Origin | China |
Standard composition
Servo Control Mode: air temperature
Instant Parameter Display: set temp, skin temp, heat power rate;
Audible/Visual Alarms: temp deviation, sensor failure, power failure, temp override;
Tilting Bed with Rotary Radiant Head
X-ray Cassette Tray under infant bed, examination light of high illuminance
Use anti-blast quartz infrared tube as radiant heating source.
Technical specification
Power | Model BNT-1000-1E | AC 110 / 120 V, 50Hz / 60Hz | |||
Model BNT-1000-2E | AC 220 / 240V, 50Hz / 60Hz | ||||
Input Power | ≤1000VA00VA00VA | ||||
Temperature control range and relative specification | Control mode | Auto mode | |||
Temperature control range | 25°C~37°C.37°C.g;C.37°C. | ||||
Skin temperature sensor measure range | 20°C~42°C~42°Ceg;C~42°C | ||||
Deviation between sensor measure temperature and control temperature | ≤0.5°C.5°Ceg;C.5°C | ||||
Skin Sensor Precision | ≤0.3°C.3°Ceg;C.3°C | ||||
Bed surface temperature Uniformity | ≤1°C;1°Ceg;C;1°C | ||||
Temperature Rise Time | ≤45min5min5min | ||||
Bed tiltable | continues adjustable in ±10°usmn;10°deg;usmn;10° | ||||
Alarm | Sensor failure alarm | Alarm with audible and visual when sensor open circuit, short circuit or disconnect, cut off power. | |||
Over temperature alarm | Alarm with audible and visual when displayed temperature was approach 38°C.eg;C.eg;C. | ||||
Deviation alarm | After temperature equilibrium, alarm with audible and visual when displayed temperature was 1°C above or below control temperature, cut off power if above 1°C. 1°C.g;C. 1°C. | ||||
Power failure alarm | Alarm with audible and visual when power failure | ||||
Environment Temperature (It is a suggestion that please do not use outside of the allow environment.) | Operate temperature range | 18°C~30°C~30°Ceg;C~30°C | |||
Store temperature range | -20°C~+55°C+55°Ceg;C+55°C | ||||
Environment Humidity | Operate humidity range | 30%RH~75%RH | |||
Store humidity range | ≤93%RH3%RH3%RH | ||||
Atmospheric pressure | Transport and Store atmospheric pressure range | 500hPa~1060hPa | |||
Operate atmospheric pressure range | 700hPa~1060hPa | ||||
Stream velocity | Ambit environment stream velocity | ≤0.3m/s3m/s3m/s | |||
Add: Intra-low-pressure suction machine
