Small, Compact and Hand-Held CO2 Monitor for Veterinary (Capno-I)
小型，紧凑和手持式CO2监测仪（Capno-I）
议价
加入意向| 型号。 | Capno-I |
| 运输包装 | 纸板箱 |
| 起源 | 中国 |
| 商标 | shinova |
| 规范 | 异 |
| HS编码 | 90181930 |
小型，紧凑型和手持二氧化碳监护仪用于兽医
型号：Capno-I
Capno-I二氧化碳监测仪是一款紧凑型显示器，提供尖端的二氧化碳监测。该系统的可靠性能，易用性，灵活的设计和实惠的成本使其成为成人，儿科和婴幼儿患者的理想监测解决方案;正在进行手术镇静的患者并对患者进行短期监测。 Capno-I自动识别和量化最终潮汐CO2，启发CO2和呼吸速率。该系统采用2.8英寸彩色液晶显示器，其锂电池最多可支持8小时。此外，它可以将历史数据自动保存在SD卡中，用户可以通过PC软件查看这些数据。
特征：
在高呼吸速率下监测尾气CO2和精确CO2
采用先进的水过滤管进行气体监测
易于学习，易于使用 - 简化菜单和专用功能键
补偿包括气压计压力，氧气，N2O和麻醉气体
8小时工作时间，待机时间24小时
96小时历史数据在PC上重播
型号：Capno-I
Capno-I二氧化碳监测仪是一款紧凑型显示器，提供尖端的二氧化碳监测。该系统的可靠性能，易用性，灵活的设计和实惠的成本使其成为成人，儿科和婴幼儿患者的理想监测解决方案;正在进行手术镇静的患者并对患者进行短期监测。 Capno-I自动识别和量化最终潮汐CO2，启发CO2和呼吸速率。该系统采用2.8英寸彩色液晶显示器，其锂电池最多可支持8小时。此外，它可以将历史数据自动保存在SD卡中，用户可以通过PC软件查看这些数据。
特征：
在高呼吸速率下监测尾气CO2和精确CO2
采用先进的水过滤管进行气体监测
易于学习，易于使用 - 简化菜单和专用功能键
补偿包括气压计压力，氧气，N2O和麻醉气体
8小时工作时间，待机时间24小时
96小时历史数据在PC上重播
| 系统 | 样品模式 | 侧流 |
| 原理 | 非分散红外（NDIR） | |
| 采样率 | 50mL / min | |
| 二氧化碳分析仪 | 单位 | mmHg，％ |
| 测量范围 | 0〜114mmHg，0〜15％ | |
| 解析度 | 0.1 mm Hg 0至50 mm Hg | |
| 0.25 mm Hg 50至114 mm Hg | ||
| 准确性 | ±2 mmHg 0 - 40 mmHg 40 mmHg 40 mmHg | |
| 读数的±5％为40 - 114 mmHg114 mmHg114 mmHg | ||
| 赔偿金 | 气压自动测量 | |
| N2O补偿用户可选择 | ||
| O2补偿由主机设置 | ||
| 呼吸频率 | 测量范围 | 2 - 120每分钟呼吸（BPM） |
| 解析度 | 1次呼吸/分钟 | |
| 准确性 | ±1 BPM或±1％，以较高者为准ever is greater | |
| 警报 | 迹象 | 有声;视觉 |
| 安静 | 是;一分钟两分钟或永久 | |
| 趋势 | 记忆 | 96小时历史数据保存 |
| 显示 | 在PC监控系统上显示 | |
| 界面和显示splay | 按键 | 菜单/确定;向上;下;取消;启动/停止 |
| 屏幕 | 2.8寸彩色液晶 | |
| 解析度 | 320 * 240像素 | |
| 扫速 | 6.25mm / s，12.5mm / s | |
| 语言 | 英语;中文 | |
| 物理性质 | 重量 | 约1kg |
| 尺寸 | 15.2厘米（高）* 9.2厘米（宽）* 4.2厘米（D） | |
| 5.98英寸（高）* 3.61英寸（宽）* 1.65厘米（D） | ||
| 电源要求 | 电压供应 | 220 ac; 50盎司 |
| 能量消耗 | 约2W典型 | |
| 电池 | 一个密封的锂电池 | |
| 电池寿命 | 至少8小时 | |
| 充电时间 | 4个小时 | |
| 环境的 | 工作温度 | 5 - 35ºCrdm; Crdm; C |
| 储存温度 | -5 - 50ºCrdm; Crdm; C | |
| 工作湿度 | 15％ - 90％，无冷凝 |
| Model NO. | Capno-I |
| Transport Package | Carton |
| Origin | China |
| Trademark | SHINOVA |
| Specification | ISO |
| HS Code | 90181930 |
Small, Compact and Hand-held CO2 Monitor for Veterinary
Model: Capno-I
Capno-I CO2 monitor is a compact handful monitor which provides cutting-edge CO2 monitoring. The system's reliable performance, ease of use, flexible design and affordable cost makes it the ideal monitoring solution for adult, pediatric and infant patients; Patients undergoing procedural sedation; And short- term monitoring of patients. Capno-I automatically identifies and quantifies the end-tidal CO2, inspired CO2 and respiration rate. The system uses with a 2.8 inch colorful LCD and its Lithium battery can support 8 hours at most. Additionally, it could save historical data automatically in a SD card and users could review these data through a PC software.
Features:
Monitors end-tidal CO2 and inspired CO2 accurately at high respiration rate
Gas monitoring with cutting-edge water filter tube
Easy to learn, easy to use - simplified menus and dedicated function keys
Compensation including barometer pressure, oxygen, N2O and anesthetic gas
8 hours working time, 24 hours standby time
96 hours historical data replay on PC
Model: Capno-I
Capno-I CO2 monitor is a compact handful monitor which provides cutting-edge CO2 monitoring. The system's reliable performance, ease of use, flexible design and affordable cost makes it the ideal monitoring solution for adult, pediatric and infant patients; Patients undergoing procedural sedation; And short- term monitoring of patients. Capno-I automatically identifies and quantifies the end-tidal CO2, inspired CO2 and respiration rate. The system uses with a 2.8 inch colorful LCD and its Lithium battery can support 8 hours at most. Additionally, it could save historical data automatically in a SD card and users could review these data through a PC software.
Features:
Monitors end-tidal CO2 and inspired CO2 accurately at high respiration rate
Gas monitoring with cutting-edge water filter tube
Easy to learn, easy to use - simplified menus and dedicated function keys
Compensation including barometer pressure, oxygen, N2O and anesthetic gas
8 hours working time, 24 hours standby time
96 hours historical data replay on PC
| System | Sample Mode | Sidestream |
| Principle | Non-dispersive Infrared (NDIR) | |
| Sample Rate | 50 mL/min | |
| Capnograph | Units | mmHg, % |
| Measure Range | 0 - 114 mmHg, 0 - 15% | |
| Resolution | 0.1 mm Hg 0 to 50 mm Hg | |
| 0.25 mm Hg 50 to 114 mm Hg | ||
| Accuracy | ± 2 mmHg 0 - 40 mmHg 40 mmHg 40 mmHg | |
| ± 5% of reading 40 - 114 mmHg114 mmHg114 mmHg | ||
| Compensation | Barometric Pressure Automatic Measuring | |
| N2O compensation User Selectable | ||
| O2 Compensation Set by Host | ||
| Respiration Rate | Measure Range | 2 - 120 Breath per minute (BPM) |
| Resolution | 1 breath/min | |
| Accuracy | ± 1 BPM or ± 1%, whichever is greaterever is greaterever is greater | |
| Alarms | Indication | Audible; Visual |
| Silence | Yes; one minutes; two minutes or permanent | |
| Trend | Memory | 96-hours historical data saving |
| Display | Display on PC monitoring system | |
| Interface & Displaysplaysplay | Keys | Menu/OK; Up; Down; Cancel; Start/Stop |
| Screen | 2.8 inch color LCD | |
| Resolution | 320 * 240 pixels | |
| Sweep Speed | 6.25 mm/s, 12.5 mm/s | |
| Language | English; Chinese | |
| Physical Properties | Weight | About 1kg |
| Size | 15.2 cm (H)* 9.2 cm(W) *4.2 cm(D) | |
| 5.98 inch(H)* 3.61 inch(W)* 1.65 cm(D) | ||
| Power Requirements | Voltage Supply | 220 AC; 50 Hz |
| Power Consumption | About 2W typical | |
| Battery | A sealed lithium battery | |
| Battery Life | At least 8 hours | |
| Recharge time | 4 hours | |
| Environmental | Operating temperature | 5 - 35º Crdm; Crdm; C |
| Storage temperature | -5 - 50º Crdm; Crdm; C | |
| Operating humidity | 15% - 90%, non-condensing |
