Veterinary Handheld Pulse Oximeter (OXI-60D)
兽医手持式脉搏血氧计（OXI-60D）
议价
加入意向| 型号。 | OXI-60D |
| 类型 | 兽医血氧计 |
| 运输包装 | 纸板箱 |
| 起源 | 中国 |
| 分类 | 诊断和监测设备的生理功能 |
| 商标 | shinova |
| 规范 | iso，ce |
| HS编码 | 90189090 |
兽医手持式脉搏血氧仪
型号：oxi-60d
兽医脉搏血氧仪可用于通过手指测量脉搏血氧饱和度和脉率。该产品适用于家庭，医院，氧吧，社区保健，体育运动中的身体护理（运动前后使用，运动过程中不推荐使用该装置）等。
特征：
A.产品操作简单方便。
B.产品体积小，重量轻，携带方便。
技术规格：
主要表现
A. SpO2值显示
B.脉搏值显示，条形图显示
脉冲波形显示
D.低电压指示：由于低电压而在工作异常之前出现低电压指示
E.屏幕亮度可以改变
F.脉搏声指示
G.具有报警功能
H.使用SpO2值和存储脉冲率值，存储的数据可以上传到计算机
I.它可以与外部血氧计探头连接
J.实时数据可以传输到计算机
检查功能
L.时钟功能
2.主要参数
A. SpO2测量范围：0％〜100％精度：当SpO2测量范围为70％〜100％时，绝对误差允许为±2％;低于70％未明确指定pecified
B.脉搏测量测量范围：30bpm〜250bpm
精度：±2 bpm或±2％（选择较大）（选择较大）(select larger)
C.分辨率SpO2：1％，脉搏率：1bpm。
D.弱填充条件下的测量性能：当脉冲充填率为0.4％时，可以正确显示SpO2和脉搏率。 SpO2误差为±4％，脉搏误差为±2 bpm或±2％（选择较大）.n; 2％（选择较大）。n; 2% (select larger).
E.耐环境光：
人造光或室内自然光条件下测得的值与暗室之间的偏差小于±1％。 1％。smn; 1%.
F.电源要求：2.6 V DC〜3.6V DC。
G.光学传感器
红光（波长660nm，6.65mW）红外（波长880nm，6.75mW）
H.可调报警范围：SpO2：0％〜100％脉率：0bpm〜254bpm
型号：oxi-60d
兽医脉搏血氧仪可用于通过手指测量脉搏血氧饱和度和脉率。该产品适用于家庭，医院，氧吧，社区保健，体育运动中的身体护理（运动前后使用，运动过程中不推荐使用该装置）等。
特征：
A.产品操作简单方便。
B.产品体积小，重量轻，携带方便。
技术规格：
主要表现
A. SpO2值显示
B.脉搏值显示，条形图显示
脉冲波形显示
D.低电压指示：由于低电压而在工作异常之前出现低电压指示
E.屏幕亮度可以改变
F.脉搏声指示
G.具有报警功能
H.使用SpO2值和存储脉冲率值，存储的数据可以上传到计算机
I.它可以与外部血氧计探头连接
J.实时数据可以传输到计算机
检查功能
L.时钟功能
2.主要参数
A. SpO2测量范围：0％〜100％精度：当SpO2测量范围为70％〜100％时，绝对误差允许为±2％;低于70％未明确指定pecified
B.脉搏测量测量范围：30bpm〜250bpm
精度：±2 bpm或±2％（选择较大）（选择较大）(select larger)
C.分辨率SpO2：1％，脉搏率：1bpm。
D.弱填充条件下的测量性能：当脉冲充填率为0.4％时，可以正确显示SpO2和脉搏率。 SpO2误差为±4％，脉搏误差为±2 bpm或±2％（选择较大）.n; 2％（选择较大）。n; 2% (select larger).
E.耐环境光：
人造光或室内自然光条件下测得的值与暗室之间的偏差小于±1％。 1％。smn; 1%.
F.电源要求：2.6 V DC〜3.6V DC。
G.光学传感器
红光（波长660nm，6.65mW）红外（波长880nm，6.75mW）
H.可调报警范围：SpO2：0％〜100％脉率：0bpm〜254bpm
| Model NO. | OXI-60D |
| Type | Veterinary Oximeter |
| Transport Package | Carton |
| Origin | China |
| Classification | Physiological Functions of Diagnosis and Monitoring Equipment |
| Trademark | SHINOVA |
| Specification | ISO, CE |
| HS Code | 90189090 |
Veterinary Handheld Pulse Oximeter
Model: OXI-60D
Veterinary Pulse Oximeter can be used in measuring the pulse oxygen saturation and pulse rate through finger. The product is suitable for being used in family, hospital, oxygen bar, community healthcare, physical care in sports (It can be used before or after doing sports and it is not recommended to use the device during the process of having sport) and etc.
Features:
A. Operation of the product is simple and convenient.
B. The product is small in volume, light in weight and convenient in carrying.
Technical Specifications:
1. Main performance
A. SpO2 value display
B. Pulse rate value display, bar graph display
C. Pulse waveform display
D. Low-voltage indication: Low-voltage indicator appears before working abnormally which is due to low-voltage
E. Screen brightness can be changed
F. A pulse sound indication
G. With alarm function
H. With SpO2 value and pulse rate value of storage, the stored data can be uploaded to computers
I. It can be connected with an external oximeter probe
J. Real-time data can be transmitted to computers
K. Review function
L. Clock function
2. Main Parameters
A. Measurement of SpO2 Measuring range: 0%~100% Accuracy: When the SpO2 measuring range is 70%~100%, the permission of absolute error is ± 2%; Below 70% unspecifiedpecifiedpecified
B. Measurement of pulse rate Measuring range: 30bpm~250bpm
Accuracy: ± 2 bpm or ± 2% (select larger)(select larger)(select larger)
C. Resolution SpO2: 1%, Pulse rate: 1bpm.
D. Measurement Performance in Weak Filling Condition: SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2 error is ± 4%, pulse rate error is ± 2 bpm or ± 2% (select larger).n; 2% (select larger).n; 2% (select larger).
E. Resistance to surrounding light:
The deviation between the value measured in the condition of man-made light or indoor natural light and that of darkroom is less than ± 1%.smn; 1%.smn; 1%.
F. Power supply requirement: 2.6 V DC ~ 3.6V DC.
G. Optical Sensor
Red light (wavelength is 660nm, 6.65mW) Infrared (wavelength is 880nm, 6.75mW)
H. Adjustable alarm range: SpO2: 0%~100% Pulse Rate: 0bpm~254bpm
Model: OXI-60D
Veterinary Pulse Oximeter can be used in measuring the pulse oxygen saturation and pulse rate through finger. The product is suitable for being used in family, hospital, oxygen bar, community healthcare, physical care in sports (It can be used before or after doing sports and it is not recommended to use the device during the process of having sport) and etc.
Features:
A. Operation of the product is simple and convenient.
B. The product is small in volume, light in weight and convenient in carrying.
Technical Specifications:
1. Main performance
A. SpO2 value display
B. Pulse rate value display, bar graph display
C. Pulse waveform display
D. Low-voltage indication: Low-voltage indicator appears before working abnormally which is due to low-voltage
E. Screen brightness can be changed
F. A pulse sound indication
G. With alarm function
H. With SpO2 value and pulse rate value of storage, the stored data can be uploaded to computers
I. It can be connected with an external oximeter probe
J. Real-time data can be transmitted to computers
K. Review function
L. Clock function
2. Main Parameters
A. Measurement of SpO2 Measuring range: 0%~100% Accuracy: When the SpO2 measuring range is 70%~100%, the permission of absolute error is ± 2%; Below 70% unspecifiedpecifiedpecified
B. Measurement of pulse rate Measuring range: 30bpm~250bpm
Accuracy: ± 2 bpm or ± 2% (select larger)(select larger)(select larger)
C. Resolution SpO2: 1%, Pulse rate: 1bpm.
D. Measurement Performance in Weak Filling Condition: SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2 error is ± 4%, pulse rate error is ± 2 bpm or ± 2% (select larger).n; 2% (select larger).n; 2% (select larger).
E. Resistance to surrounding light:
The deviation between the value measured in the condition of man-made light or indoor natural light and that of darkroom is less than ± 1%.smn; 1%.smn; 1%.
F. Power supply requirement: 2.6 V DC ~ 3.6V DC.
G. Optical Sensor
Red light (wavelength is 660nm, 6.65mW) Infrared (wavelength is 880nm, 6.75mW)
H. Adjustable alarm range: SpO2: 0%~100% Pulse Rate: 0bpm~254bpm
