Cryolipolysis Body Sculpting Fat Frozen Device with Four Cryo Hnadles
低温脂肪解冻身体雕刻脂肪冷冻设备与四个低温。
议价
加入意向| 型号。 | etg50-4s |
| 理论 | Cryolipolysis |
| 手提 | 不可携带 |
| 真空强度 | 10 Kpa - 80 Kpa |
| 冷却装置输出温度 | -11~45c |
| 商标 | Vantee |
| 规范 | 139厘米*63厘米*55厘米 |
| HS编码 | 9018909000 |
| 类型 | 减肥机 |
| 应用 | 沙龙，家 |
| 处理冷冻温度 | 0c到-10c |
| 冷冻溶解屏 | 10寸宽色触摸屏 |
| 冷冻解冻手柄 | 4个冷冻柄 |
| 运输包装 | 木头箱子 |
| 起源 | 中国 |
ETG50-4s四手冷冻解脂减肥机
冷冻脂肪减肥机手柄
4.可更换冰淇淋手柄，用于不同的目标部位
2.两种溶脂解决方案同时工作，适用于两个目标区域或两个不同的客户。这可以帮助赚更多 每天有更多的治疗
3.开始/停止治疗按钮在每个尺寸的手柄上，便于运行。
4.处理显示每个尺寸的手柄，以显示实际的处理压力和温度。
5.治疗冷冻温度为5℃至-10℃。真空强度为10KPa-80Kpa。
冷冻瘦身机特点：
特殊热疗模式
当该模式开始时，溶脂酶处理灯是红色的。将皮肤加热，以促进目标区域血液循环的活动，以减少冷冻治疗期间的不适感。然后温度降至设定的冷冻处理温度。那时候手指灯是绿色的，就意味着冻结治疗开始了。
2.患者治疗心率测试仪，用于监测患者在治疗过程中的情况。
3.在病人手中紧急停止手柄，使患者在任何时候感到不舒适的时候都可以停机。
4.三种真空模式用于不同的目的来吸脂或按摩脂肪。
两个独立的工作系统：
独立的气泵，确保足够的真空压力;
独立的控制系统，两个溶脂解决方案独立工作;
单独的水泵，每个手柄带一个水泵，有效冷却;
9L水箱，散热器大，散热风扇最佳，保证机器不间断运转12小时。
7.高品质组件具有最佳的内部结构设计，达到高水平的性能。
冷冻脂肪体雕塑机规格：
| 输入电压 | ac110v / 220v 50-60hz |
| 能量消耗 | < 500w |
| 冷冻溶解屏 | 10寸宽彩色触摸屏 |
| 冷却装置的输出温度 | -11〜45°CDEG; C ^deg;C |
| 冷却装置输出压力 | 0-100kpa |
| 冷却液 | 纯净水 |
| 默认时间 | 0-120min |
| 保险丝尺寸 | f2al250v |
| 冷冻溶解机器尺寸 | 44 * 48.5 *96厘米 |
| 包装尺寸 | 75 * 53 *146厘米 |
| 净重/毛重 | 75kg / 86kg |
冷冻溶冻抗冻膜：
防冻膜在治疗过程中是必需的，以保护皮肤免受冻伤。
三种尺寸选项：
尺寸 | （S）28 * 28厘米，60克/袋 （M）27 * 30厘米，70克/袋 （L）34 * 42厘米，110克/袋 |
| 防冻 | 最大-20C |
| 用法 | 一次性使用 |
| 到期日期 | 三年 |
| 打包 | 1件/银包 |
| Model NO. | ETG50-4S |
| Theory | Cryolipolysis |
| Portable | Non Portable |
| Vacuum Intensity | 10 Kpa - 80 Kpa |
| Cooling Device Output Temperature | -11~45c |
| Trademark | Vantee |
| Specification | 139cm*63cm*55cm |
| HS Code | 9018909000 |
| Type | Slimming Machine |
| Application | Salon, Home |
| Treatment Cryo Temperature | 0c to -10c |
| Cryolipolysis Screen | 10-Inch Wide Color Touch Screen |
| Cryolipolysis Handles | 4 Cryo Handles |
| Transport Package | Wooden Case |
| Origin | China |
ETG50-4s Four handles cryolipolysis slimming machine
Cryolipolysis Slimming Machine Handle
1. 4 changeable cryolipolysis handles, for different target parts
2. Two cryolipolysis handles work same time, for two target areas or two different clients. That can help earn more each day with more treatments
3. Start/ Stop treatment button on each size handle, easy to run the operation.
4. Treatment display on each size handle, to show the real treatment pressure and temperature.
5. Treatment cryo temperature is from 5C to -10C.Vacuum intensity 10KPa-80Kpa.
Cryolipolysis Slimming Machine Features:
1. Special hyperthermia mode.
When that mode starts, the cryolipolysis handle light is red. That will heat the skin up to promote the activity of the target area blood circulation, to reduce the discomfortable feeling during the freezing treatment. Then the temperature comes down to the freezing treatment temperature as set. That time the handle light is green, means the freezing treatment starts.
2. Patient treatment heart rate tester, to monitor the patient situation during the treatment.
3. Emergency stop handle in the patient hand, so the patient can stop the machine any time they feel discomfortable.
4. Three vacuum modes for different purpose to suck or massage the fat.
5. Two separate working systems:
Separate air pumps, ensure enough vacuum pressure;
Separate control systems, two cryolipolysis handles work independently;
Separate water pumps, each handle with one water pump for effective cooling;
6. 9L water tank, with big radiator and fans for best cooling, ensure the machine keep working without break for 12 hours.
7. High quality components with best inner structure design, to reach a high level performance.
Specifications Of Cryolipolysis Body Sculpting Machine:
| Input voltage | AC110V/220V 50-60Hz |
| Power consumption | < 500w |
| Cryolipolysis Screen | 10-inch wide color touch screen |
| Cooling device output temperature | -11~45°Cdeg;Cdeg;C |
| Cooling device output pressure | 0-100KPa |
| Cooling liquid | pure water |
| Default time | 0-120min |
| Fuse size | F2AL250V |
| Cryolipolysis Machine dimension | 44*48.5*96cm |
| Package size | 75*53*146cm |
| NW/GW | 75kg / 86kg |
Cryolipolysis anti freeze membrane:
The antifreeze membrane is necessary during the treatment, to protect the skin from frostbiting.
Three sizes for option:
Size | (S) 28*28cm, 60g/bag (M) 27*30cm, 70g/bag (L) 34*42cm, 110g/bag |
| Anti freeze | Max -20C |
| Usage | Disposable use |
| Expire date | Three years |
| Packaging | 1pcs/ silver bag |
