4 in 1 Multifunction Cryolipolysis Lipolaser Cavitation RF Freezing Fat Device

4合1多功能冷冻溶脂Lipolaser气蚀RF冷冻脂肪装置

议价

译文
原文

型号。	vt26
应用	沙龙，家
处理冷冻温度	5至-16摄氏度
二极管Lipolaser电源	100MW
二极管激光灯	104二极管
气蚀频率	40kHz的
输入电压	ac110v / 220v 50-60hz
运输包装	木头箱子
起源	中国
类型	减肥机
手提	手提
真空强度	0 Kpa - 100 Kpa
双波长	为650nm＆980nm的; 980nm的980nm
RF频率	5MHz的
默认时间	0-60MIN
商标	Vantee
规范	66 * 73 *66厘米
HS编码	9018909000

VT26多功能冷冻脂肪脂激酶空化RF冷冻脂肪装置

冷冻脂肪脂脂肪酶空化RF冷冻脂肪装置应用：
有效消除脂肪团，消除水肿;
脂肪转移，皮肤紧致;
消除顽固的脂肪团;
4.融化脂肪，摧毁脂肪，然后创造完美的曲线。
多功能Lipolaser Cryolipolysis身体减肥机手柄：
冷冻解冻手柄：
冷冻溶解处理手柄是有效减肥的最重要的部分。先进冷却技术 - 半导体陶瓷低温垫，溶脂溶解可以产生低至-16℃的处理温度。
手柄有三种尺寸：

冷冻溶解手段特点：
1.使用硅胶，使其足够柔软，使客户在使用过程中感到舒适。
2.较软的管材，材质较好。
3.机器上的水循环传感器显示，如果水循环有问题，机器会报警。

双重长度Lipolaser垫：
该Lipolaser使用双波长650nm和980nm二极管激光器，具有6个焊盘。
四个大脂肪垫，每个24个二极管，两个小垫，每4个二极管，共104个二极管。
每个焊盘半660nm二极管，半个980nm二极管。
3.机身40KHz气穴手柄，面向5MHz三极体，五极体RF。

多功能冷冻脂分解机特点：

两个冷冻手柄同时工作，两个目标区域或两个不同的客户端。
两个独立的工作系统：
独立的气泵，确保足够的真空压力;
独立的控制系统，两个手柄独立工作;
单独的水泵，每个手柄带有一个水泵，有效冷却。
3. 9L水箱，配有大散热器和风扇，以达到最佳的散热效果，保证机器不间断运转12小时。
4.高品质元件具有最佳的内部结构设计，达到高水平的性能。
日本三菱二极管ML101J27内。
6.两个冷冻溶解手柄和六个脂肪激光垫一起工作，同时用于不同的处理部件。
多功能冷冻脂肪乳化机显示：

冷冻溶冻抗冻膜：
防冻膜在治疗过程中是必需的，以保护皮肤免受冻伤。
三种尺寸选项：

尺寸	（S）28 * 28厘米，60克/袋（M）32 * 32厘米，70克/袋（L）34 * 42厘米，110克/袋 1包/包
防冻	最大-20C
用法	一次性使用
到期日期	三年

Model NO.	VT26
Application	Salon, Home
Treatment Cryo Temperature	5 to -16 Degrees Celsius
Diodes Lipolaser Power	100MW
Diodes Laser Lights	104 Diodes
Cavitation Frequency	40kHz
Input Voltage	AC110V/220V 50-60Hz
Transport Package	Wooden Case
Origin	China
Type	Slimming Machine
Portable	Portable
Vacuum Intensity	0 Kpa - 100 Kpa
Dual Wave Length	650nm&980nm;980nm980nm
RF Frequency	5MHz
Default Time	0-60min
Trademark	Vantee
Specification	667366CM
HS Code	9018909000

VT26 Multifunction Cryolipolysis Lipolaser Cavitation RF Freezing Fat Device

Cryolipolysis Lipolaser Cavitation RF Freezing Fat Device Applications:
1. Effectively get rid of cellulite, eliminate edema;
2. Fat transfer, compact skin;
3. Elimination of intractable cellulite;
4. Melting fat, destroy fat, then create the perfect curve.
Multifuction Lipolaser Cryolipolysis Body Slimming Machine Handles:
1. Cryolipolysis handle:
Cryolipolysis treatment handle is the most important part for the effective fat reduce. With advanced cooling technology-Semiconductor ceramic cryo pads, cryolipolysis can create as low as -16C treatment temperature.
The handles are three sizes:

Feature Of Cryolipolysis Handles:
1. With medical use silicon, it makes soft enough for the target, customer will feel comfortable during the process.
2. Softer pipe with better material.
3. Water cycle sensor on the machine display, if there is any problem of the water cycle, machine will alarm.

2. Dual wevalength Lipolaser pads:
That lipolaser uses dual wavelength 650nm and 980nm diode laser, with 6 pads.
Four big lipolaser pads, each 24 diodes, two small pads, each 4 diodes, total 104 diodes.
Each pad half 660nm diodes, half 980nm diodes.
3. 40KHz cavitation handle for body, 5MHz tripolar for face and five polar RF for body.

Multifunction Cryolipolysis Lipolaser Machine Features:

1. Two cryo handles work same time, for two target areas or two different clients.
2. Two separate working systems:
Separate air pumps, ensure enough vacuum pressure;
Separate control systems, two handles work independently;
Separate water pumps, each handle with one water pump for effective cooling.
3. 9L water tank, with big radiator and fans for best cooling, ensure the machine keep working without break for 12 hours.
4. High quality components with best inner structure design, to reach a high level performance.
5. Japan Mitsubishi diodes ML101J27 inside.
6. Two Cryolipolysis handles and six lipolaser pads working together, for different treatment parts at same time.
Multifunction Cryolipolysis Lipolaser Machine Display:

Cryolipolysis anti freeze membrane:
The antifreeze membrane is necessary during the treatment, to protect the skin from frostbiting.
Three sizes for option:

Size	(S) 2828cm, 60g/bag (M) 3232cm, 70g/bag (L) 34*42cm, 110g/bag 1pcs / bag
Anti freeze	Max -20C
Usage	Disposable use
Expire date	Three years