Fat Transplantation Filter System
脂肪移植过滤系统
| 功能 | 脂肪移植Fiter |
| MOQ | 1件 |
脂肪移植过滤系统规范
它有两个级别的过滤设备组合
吸脂吸液器具有水动力功能。
脂肪移植过滤系统
脂肪移植过滤系统具有两个级别过滤设备，结合具有水动力功能的吸脂抽吸器，更好的选择，不需要使用离心机，脂肪可以安全地移植，没有
感染危害。系统容量为1000ml，不锈钢材质。高压灭菌后，第一级过滤器和第二级。脂肪颗粒可以移植。
系统视频的操作可用。
标准清单：
1.底座：实心不锈钢，稳定，该窗口如果用于观察罐底部的液体沉积
2.盖：不锈钢
3.初级过滤器：2mm过滤器空间设计，用于过滤膜和大脂肪颗粒。
4.无用液体吸管：吸管连接在收集罐底部，以确保脂肪颗粒不能被管吸。它是通过特殊尺寸设计来过滤脂肪
5.吸头：盖子上的吸孔设计有两个功能，一是使用吸水泵吸入脂肪后的所有无用液体，其次，使用吸脂套管吸取有用的脂肪形式的瓶子在无用的液体抽吸后，脂肪从收集罐中吸出。
6.孔设计可确保全脂吸收过程在密封无菌容器中进行，安全性高
一把手有四根插管
应用
主要用于自体脂肪移植用于隆胸，髋关节等。大量的脂肪移植整形手术，可以与流体动力吸脂设备一起使用，也可用于一般吸脂机或真空机
优点
整个抽吸，过滤器收集，无用的液体抽吸程序可以在密封的无菌瓶中进行，可以有效防止交叉感染;这种脂肪过滤器设计适用于移植脂肪颗粒;由德国脂肪过滤系统设计理念引进，技术精湛，是自体脂肪移植的理想设备。
它有两个级别的过滤设备组合
吸脂吸液器具有水动力功能。
脂肪移植过滤系统
脂肪移植过滤系统具有两个级别过滤设备，结合具有水动力功能的吸脂抽吸器，更好的选择，不需要使用离心机，脂肪可以安全地移植，没有
感染危害。系统容量为1000ml，不锈钢材质。高压灭菌后，第一级过滤器和第二级。脂肪颗粒可以移植。
系统视频的操作可用。
标准清单：
1.底座：实心不锈钢，稳定，该窗口如果用于观察罐底部的液体沉积
2.盖：不锈钢
3.初级过滤器：2mm过滤器空间设计，用于过滤膜和大脂肪颗粒。
4.无用液体吸管：吸管连接在收集罐底部，以确保脂肪颗粒不能被管吸。它是通过特殊尺寸设计来过滤脂肪
5.吸头：盖子上的吸孔设计有两个功能，一是使用吸水泵吸入脂肪后的所有无用液体，其次，使用吸脂套管吸取有用的脂肪形式的瓶子在无用的液体抽吸后，脂肪从收集罐中吸出。
6.孔设计可确保全脂吸收过程在密封无菌容器中进行，安全性高
一把手有四根插管
应用
主要用于自体脂肪移植用于隆胸，髋关节等。大量的脂肪移植整形手术，可以与流体动力吸脂设备一起使用，也可用于一般吸脂机或真空机
优点
整个抽吸，过滤器收集，无用的液体抽吸程序可以在密封的无菌瓶中进行，可以有效防止交叉感染;这种脂肪过滤器设计适用于移植脂肪颗粒;由德国脂肪过滤系统设计理念引进，技术精湛，是自体脂肪移植的理想设备。
| Function | Fat Transplantation Fiter |
| MOQ | 1 Piece |
Specification of fat transplantation filter system
It has two level filter equipments, combined
With liposuction aspirator which has hydrodynamic function.
Fat transplantation filter system
The fat transplantation filter system has two level filter equipments, combined with liposuction aspirator which has hydrodynamic function, would be better option, not necessory using centrifuge, the fat can be transplanted safely without
Infection hazards. Capacity for the system is 1000ml, stainless steel material, . Autoclavable, after first level filter and second level. The fat granule can be transplanted.
The operation of the system video is available.
Standard list:
1. Base: Solid stainless steel, it is stable, This window if for observing liquid deposition at the bottom of the tank
2. Cover: Stainless steel
3. Primary filter: 2mm filter space design, Used to filter membrane and large fat particles.
4. Useless Liquid suction tube: The suction tubes connected to the bottom of the collecting tank, to ensure the fat particles can not be sucked by tube. It is designed by special size to filter the fat
5. Suction plug: The design of the suction hole on the cover has two functions, one, use the suction pump to suck all of the useless liquid form the bottom after liposcution, Secondly, use liposuction cannula to suck the useful fat form the bottle after useless liquid suction, the fat sucked out of collecting tank.
6. The hole design can ensure the whole fat absorption process are carried out in a sealed sterile container, high security
7. One handle with 4 cannulas
Application
Is mainly used for autogenous fat transplantation for breast augmentation, hip etc. Large amount of fat transplantation of plastic surgery, it can be used with the Hydrodynamic liposuction equipment, also can be used with general liposuction machine or vacuum machine
The advantages
The whole suction, filter collection, useless liquid suction procedure can be proceed in the sealed sterile bottle that can effectively prevent cross infection; This fat filter design is good for transplanting fat particles; It is Introduced by Germany fat filtering system design idea, with exquisite technology, it is the ideal equipment autogenous fat transplantation.
It has two level filter equipments, combined
With liposuction aspirator which has hydrodynamic function.
Fat transplantation filter system
The fat transplantation filter system has two level filter equipments, combined with liposuction aspirator which has hydrodynamic function, would be better option, not necessory using centrifuge, the fat can be transplanted safely without
Infection hazards. Capacity for the system is 1000ml, stainless steel material, . Autoclavable, after first level filter and second level. The fat granule can be transplanted.
The operation of the system video is available.
Standard list:
1. Base: Solid stainless steel, it is stable, This window if for observing liquid deposition at the bottom of the tank
2. Cover: Stainless steel
3. Primary filter: 2mm filter space design, Used to filter membrane and large fat particles.
4. Useless Liquid suction tube: The suction tubes connected to the bottom of the collecting tank, to ensure the fat particles can not be sucked by tube. It is designed by special size to filter the fat
5. Suction plug: The design of the suction hole on the cover has two functions, one, use the suction pump to suck all of the useless liquid form the bottom after liposcution, Secondly, use liposuction cannula to suck the useful fat form the bottle after useless liquid suction, the fat sucked out of collecting tank.
6. The hole design can ensure the whole fat absorption process are carried out in a sealed sterile container, high security
7. One handle with 4 cannulas
Application
Is mainly used for autogenous fat transplantation for breast augmentation, hip etc. Large amount of fat transplantation of plastic surgery, it can be used with the Hydrodynamic liposuction equipment, also can be used with general liposuction machine or vacuum machine
The advantages
The whole suction, filter collection, useless liquid suction procedure can be proceed in the sealed sterile bottle that can effectively prevent cross infection; This fat filter design is good for transplanting fat particles; It is Introduced by Germany fat filtering system design idea, with exquisite technology, it is the ideal equipment autogenous fat transplantation.
