Six Pads Lipolaser Body Slimming Device with 168 Diodes Laser
六垫Lipolaser身体减肥装置与168二极管激光
议价
加入意向| 型号。 | vt509 |
| 理论 | 激光 |
| 手提 | 手提 |
| Lipo激光器的输出功率 | 100mw - 200mw |
| 运输包装 | 铝箱 |
| 起源 | 中国 |
| 类型 | 减肥机 |
| 应用 | 沙龙，家 |
| 二极管激光器寿命 | 8000-10000小时 |
| 商标 | Vantee |
| 规范 | 62厘米*58厘米*48厘米 |
| HS编码 | 90189090 |
VT509 650nm和980nm Lipolaser瘦身装置，带168个二极管激光激光器laser
六帮Lipolaser机器说明书
Lipo激光减肥装置，也被称为软激光，冷激光或低级激光治疗，使用红光650nm或不可见 980nm激光能量穿透皮肤，当脂肪细胞被模拟时，细胞膜会产生 毛孔释放脂肪酸和甘油。
反馈显示，通过运动或红外线治疗，脂肪细胞将被淋巴或者淋巴排泄 循环。
六碟Lipolaser机器结果
一年来市场上的实际治疗显示，脂乳激光器通过吸脂实现了相当的效果， 一次处理后脂肪层深度减少30％。其他治疗方法进一步改善结果。 随着脂肪细胞内容物的释放，每次处理后可以看到即时结果。
反馈显示，lipolaser已经成功地减少3-4cm后一个治疗，有些变得更好 6-8厘米，最好的是减肥12厘米。
双波长Lipo激光应用
*强力物理脂肪分解以去除脂肪
*过多的脂肪细胞融化
* 身体减肥，减脂
* 光滑疲劳
* 消除渠道和抵押物的障碍
* 促进和加速身体的新陈代谢
六垫Lipolaser机垫：
该Lipolaser使用双波长650nm和980nm二极管激光器，具有6个焊盘。八大lipolaser垫， 每40个二极管，四个小焊盘，每4个二极管，共168个二极管。每个焊盘半个650nm二极管，半个980nm二极管。
六帮Lipolaser机特点：
1.四个lipolaser垫每40个二极管，足够大的垫将每次处理更多的区域。
2.日本三菱二极管ML101J27内
更有效的激光能量，130mw-350mw（脉冲）
4.具有频率变化的脉冲模式
长寿命从三菱数据表8000-10000小时
6.智能操作画面，自动设置不同处理区域的治疗数据，颈部，背部， 腹部，手臂和腿。
7.积极反馈，快速有效地减少脂肪。
六柱唇膏机规格：
| 波长 | 660nm和980nm，双波长 |
| 能量输出 | 混合168x 130mW， 最大168x350mw（脉冲） |
| 电压 | 220v或110v / 50Hz-60Hz |
| 二极管激光类型 | 三菱ML101J27 |
| 安全 | 车载诊断 |
| 分类 | 电气等级1，B型应用零件 |
| 垫 | 6件; 4大垫2小 |
| 总二极管 | 168件 |
| 保险丝 | 5A |
| 操作模式 | 连续 |
| 入场评级 | IPXO |
| 环保要求 | 10°°deg;°C到40°°deg;°C |
| 制冷要求 | 风冷 |
| 最大输出功率 | 100VA |
| nw./gw | 25公斤/ 35kgs |
| CE | ce与lvd和emc |
| 触摸屏 | 8'触摸屏 |
| 规格。 | 62厘米*58厘米*48厘米 |
| Model NO. | VT509 |
| Theory | Laser |
| Portable | Portable |
| Output Power of Lipo Laser | 100MW - 200MW |
| Transport Package | Aluminum Case |
| Origin | China |
| Type | Slimming Machine |
| Application | Salon, Home |
| Lifetime of Diode Laser | 8000-10000 Hours |
| Trademark | Vantee |
| Specification | 62cm*58cm*48cm |
| HS Code | 90189090 |
VT509 650nm&980nm Lipolaser Slimming Device with 168 diodes laserlaserlaser
Six Pads Lipolaser Machine instruction
Lipo Laser Slimming device, also knows as soft laser, cold laser or low level laser therapy, uses red light 650nm or invisible 980nm laser energy to penetrate the skin, when the fat cells are simulated, the cell membrane will create the pores to release fatty acids and glycerol.
Feedback shows, with exercise or the infrared therapy, the fat cells will be burnt or drained by the lymph circulation.
Six Pads Lipolaser Machine results
One year real treatment on the market shows lipolaser has achieved comparable results by liposuction, 30% reduction in the fat layer depth after just one treatment. Additional treatments improve results further. Immediate results can be seen after each treatment as the fat cell contents are released.
Feedback shows lipolaser has been successful to reduce 3-4cm after just one treatment, some get better 6-8cm, the best one is 12cm fat reduction.
Dual Wavelength Lipo Laser applications
* Intensive physical lipolysis to remove fat
* Excess fat cell melted
* Body slimming, cellulite reduction
* Smooth fatigue
* Remove obstruction from channels and collaterals
* Promote and accelerate the body's metabolism
Six Pads Lipolaser Machine pads:
That lipolaser uses dual wavelength 650nm and 980nm diode laser, with 6 pads. Eight big lipolaser pads, each 40 diodes, four small pads, each 4 diodes, total 168 diodes. Each pad half 650nm diodes, half 980nm diodes.
Six Pads Lipolaser Machine features:
1. Four lipolaser pads each 40 diodes,the large enough pad will treat more area each time.
2. Japan Mitsubishi diodes ML101J27 inside
3. Much more effective laser energy with 130mw-350mw (pulsing)
4. Pulsing mode with changeable frequency
5. Long lifetime with 8000-10000 hours from Mitsubishi data sheet
6. Smart operation screen, automatically set the treatment data for different treatment area, neck, back, abdomen, arms and legs.
7. Positive feedback for the fast and effective fat reduction.
Specifications of Six Pads Lipolaser Machine:
| Wave length | 660nm and 980nm, dual wave length |
| Energy Output | Mix 168x 130mW, Max 168x350mw (Pulse) |
| Voltage | 220v or 110v/50Hz-60Hz |
| Diode laser type | Mitsubishi ML101J27 |
| Safety | On Board Diagnostics |
| Classification | Electrical Class 1, Type B applied part |
| Pads | 6 pcs; 4 big pads 2 small ones |
| Total diodes | 168 pcs |
| Fuse | 5A |
| Mode of Operation | Continuous |
| Ingress Rating | IPXO |
| Environmental requirements | 10°°deg;°C to 40°°deg;°C |
| Cooling requirements | Air cooled |
| Maximum Output Power | 100VA |
| NW./GW | 25KGS/35KGS |
| CE | CE WITH LVD AND EMC |
| Touch screen | 8' touch screen |
| Spec. | 62CM*58CM*48CM |
