特征：
触摸屏，5.0寸彩色TFT-LCD，操作简单，快速准确测量数据;数据;data;
内置可充电锂电池，运行时间长达15小时，支持交流和直流电源;
可调声光报警，传感器关闭报警;
长时间监测和睡眠监测;
便于携带，适用于救护车中心，具有固定作用;
在此之前：
通过趋势图和趋势列表存储和查看最多3888个组的数据。
USB和蓝牙数据上传;
水平和垂直显示可选;
大字体界面易于观察;
背光可调;
免费高级软件
可选蓝牙打印机打印波形和数据。
规范：
一般规格：
尺寸：209mm×104mm×47.5mm; 47.5毫米times; 47.5mm
净重：655g
显示规格
测量显示：彩色TFT-LCD /触摸屏
电源指示灯：双色LED（红/绿）
充电指示灯：绿色LED
2.电源
交流电源适配器
输入：100〜240vac，50 / 60hz，0.7a
输出：DC 5V，1.5A
电池
锂离子充电电池，3.7V / 7200mAH
工作时间：15小时充满电量。
（条件：25ºC，NIBP工作时间为15分钟）nutes）nutes)
充电时间：10小时。
环境
温度
工作：0℃〜45℃
运输和储存：-25℃〜85℃
湿度
工作：30％〜85％
运输和储存：30％〜95％（无冷凝）
监控参数
心电图
输入：3芯心电导线，标准AAMI电缆连接器
牵头选择：I，II，III
增益选择：×1，×2，×4，×8; 2，×4，×84, × 8; 2, × 4, × 8
扫描速度：12.5，25和50 mm / s
频率响应：无滤波器：0.05〜100Hz（-3dB），滤波器：0.5〜40Hz（-3dB）
校准信号：1mV方波
防护：防止电外科干扰和除颤
心率
测量范围：20 bpm〜300 bpm
续约时间：每拍1次
精度：±1 bpmn; 1 bpmn; 1 bpm
报警模式：声光报警
血氧
血氧％
测量范围：0％〜100％
分辨率：1％
精度：±2％（90％〜99％），±3％（70％〜89％），未指定（0％〜69％）（0％〜69％）cified (0%~69%)
心率
测量和报警范围：20〜300bpm
分辨率：1bpm
精度：±1bpmmn; 1BPMmn; 1bpm
血压
方法：示波
模式：手动，自动，STAT
自动模式下的测量间隔：1,2,3,5,10,15,20,30,45,60（min）
STAT模式测量周期：5分钟
袖口压力范围：0 mmHg〜300mmHg
脉冲速率范围：30 bpm〜250bpm
测量怒气：成人30 mmHg〜255mmHg，小儿30 mmHg〜160mmHg
超压保护：成人300mmHg，儿科220mmHg
压力分辨率：1mmHg
使用该装置测量的SYSTOLIC和DIASTOLIC值应等于由经过训练的医务人员使用袖带和听诊器测量的值。使用该装置测量的MEAN值等于使用血压测量装置测量的值。
温度
输入：体表热敏电阻温度传感器
测量范围：0ºC〜50ºC〜50ºCdm; C~50º C
精度：±0.1ºC; 0.1ºCdm; C; 0.1º C
5.存储和审查
最大数据数量：3888组
最大趋势时间：连续129.6小时
6.打印机（可选）
类型：热敏微型打印机
打印纸：58mm热敏纸，纸卷直径≤Φ33mmhi; 33毫米hi; 33mm
接口：蓝牙无线接口
记录类型：实时打印和查看数据打印
电源：
充电电池1700mAh〜2000mAh。 7.2V。
充电（放电）1000次。
充电时间：2小时
工作作业/相对湿度：0〜55℃/ 10〜80％RH〜80％RH~80%RH
存储操作/相对湿度：20〜60ºC/ 10〜90％RH〜90％RH~90%RH

Features:
Touch screen, 5.0 inch color TFT-LCD, simple for operating, quickly&accurately measure the data;data;data;
Build-in rechargeable Li-battery, up to 15 hours running time, support AC and DC power;
Adjustable audible and visual alarms, and sensor off alarm;
Long time monitoring and sleeping monitoring;
Easy to carry, suitable for ambulance center, has the stand for fixing;
Prior:
Storage and review data up to 3888groups via Trend Graph and Trend List.
USB and Bluetooth data upload;
Horizontal and vertical display selectable;
Big font screen interface is easy to observe;
Back light can be adjusted;
Free advanced software
Optional Bluetooth printer to print the waveform and data out.
Specification:
1. General Specifications:
Size: 209mm× 104mm× 47.5mmtimes; 47.5mmtimes; 47.5mm
Net Weight: 655g
Display Specification
Measurement Display: Color TFT- LCD/touch screen
Power Supply Indicator: Dual-color LED (red/green)
Charging indicator: A green LED
2. Power Supply
AC Power Adaptor
Input: 100~240VAC, 50/60Hz, 0.7A
Output: DC 5V, 1.5A
Battery
Li-ion rechargeable battery, 3.7V/7200mAH
Operating Time: 15 hours with full battery capacity.
(Condition: 25º C, NIBP working period is 15 minutes)nutes)nutes)
Recharge Time: 10 hours.
3. Environment
Temperature
Working: 0 C~45 C
Transport and Storage: -25 C~85 C
Humidity
Working: 30% ~85 %
Transport and Storage: 30% ~95 % (no condensation)
4. Monitoring Parameter
ECG
Input: 3- lead ECG cable, standard AAMI cable connector
Lead Selection: I, II, III
Gain Selection: × 1, × 2, × 4, × 8; 2, × 4, × 84, × 8; 2, × 4, × 8
Sweep Speed: 12.5, 25, and 50 mm/s
Frequency Response: None filter: 0.05~100Hz (-3dB), filter: 0.5~40Hz (-3dB)
Calibration Signal: 1mV square wave
Protection: Against electrosurgical interference and defibrillation
Heart Rate
Measuring Range: 20 bpm~300 bpm
Renew Time: 1 time per beat
Accuracy: ± 1 bpmn; 1 bpmn; 1 bpm
Alarm Mode: Audible and visual alarm
SpO2
SpO2%
Measuring Range: 0%~100%
Resolution: 1 %
Accuracy: ± 2 %(90%~99%), ± 3 %(70%~89%), unspecified (0%~69%)cified (0%~69%)cified (0%~69%)
Pulse Rate
Measuring and Alarm Range: 20~300bpm
Resolution: 1bpm
Accuracy: ± 1bpmmn; 1bpmmn; 1bpm
NIBP
Method: Oscillometric
Mode: Manual, Auto, STAT
Measuring Interval in AUTO Mode: 1, 2, 3, 5, 10, 15, 20, 30, 45, 60 (min)
Measuring Period in STAT Mode: 5 min
Cuff Pressure Range: 0 mmHg~300mmHg
Pulse Rate Range: 30 bpm~250bpm
Measurement Rage: Adult 30 mmHg~255mmHg, Pediatric 30 mmHg~160mmHg
Over-pressure Protection: Adult 300mmHg, Pediatric 220mmHg
Pressure Resolution: 1mmHg
The SYSTOLIC and DIASTOLIC values measured using this device shall be equal to those measured by trained medical personnel using cuff and stethoscope. The MEAN value measured using this device is equal to that measured using blood pressure measurement device.
Temperature
Input: Body surface thermal-sensitive resistor temperature sensor
Measuring Range: 0º C~50º C~50º Cdm; C~50º C
Accuracy: ± 0.1º C; 0.1º Cdm; C; 0.1º C
5. Storage and Review
Maximum Data Quantity: 3888 groups
Maximum Trend Time: Continuous 129.6 hours
6. Printer (optional)
Type: Thermal micro-printer
Printer Paper: 58 mm thermal paper, Paper roll diameter≤ Φ 33mmhi; 33mmhi; 33mm
Interface: Bluetooth wireless interface
Recording Types: Real-time printing and review data printing
Power Supply:
Rechargeable battery 1700mAh~2000mAh. 7.2V.
Charge(discharge) 1000times.
Charge time: 2hours
Work Operation/relative humidity: 0~55º C/10~80%RH~80%RH~80%RH
Storage Operation/relative humidity: 20~60º C/10~90%RH~90%RH~90%RH