High Polymer Fiberglass Cast

High Polymer Fiberglass Cast

高聚合物玻璃纤维铸造

1000+
1 USD

加入意向
类型 绷带
规范 ce fda iso
商标 舜天
起源 江苏中国
高分子/玻璃纤维铸件:
该产品由聚氨酯浸泡的多层特殊玻璃纤维所覆盖。具有优异的塑性和柔韧性。
打开包装3-5分钟后开始硬化,20分钟后即可加载。
凝固时放热温度适宜,凝固后收缩小。消除皮肤受影响部位的不舒适症状,如紧张和瘙痒。
产品在适当的压力下进行包装和密封。可以避免长时间储存​​引起的聚酯堆积,使用时可以轻松打开。
硬度比普通石膏绷带的20倍,有效减少外力再伤害的可能性,确保固定功能。
重量仅为石膏绷带的1/5,厚度为1/3。
通过X射线没有拆解,电影很清楚。
透气性好,可以消除其他绷带引起的皮肤瘙痒和刺激。
适用范围广。骨科外科固定,矫形外科医生矫形工具,人造肢辅助功能器具,支撑工具。局部保护烧伤如支架
更多产品
灌注注射器灯泡
灌注注射器戒指
安全自毁注射器10
安全自毁注射器5m
安全自毁式注射器2 /
安全自毁注射器1m
常规注射器50ml
常规注射器20ml
Type Bandage
Specification CE FDA ISO
Trademark sainty
Origin Jiangsu China
High Polymer/fiberglass cast:
This product is underlaid by multilayer special glass fiber soaked by Polyurethane. It has excellent plasticity and flexibility.
Begin to harden after opening the package 3-5 minutes, and can load after 20 minutes.
The exothermic temperature is suitable when solidifying, and small shrinking after solidifying. Eliminating the uncomfortable symptoms of the affected part of skin such as tight and itches.
The product is packaged and sealed under appropriate pressure. It can avoid polyester accumulation caused by long-term storage and can be opened easily when using.
Hardness is 20 times than normal plaster bandage and reduce the possibility of re-injury by the external force effectively, thus ensure the function of fixation.
Weight is only 1/5 of the plaster bandage, and thickness is 1/3.
Through X-ray without dismantle and the film is very clear.
High good air permeability, it can eliminate the skin itching and irritation caused by other bandages.
Wide scope of application. External fixation of orthopedics, orthopedic tools for orthopedic surgeon, auxiliary function appliance for artificial limb, supported tools. Local protection for burn such as a stent
More Products
Irrigation Syringe Bulb
Irrigation Syringe Ring
Safety Self-Destructive Syringe 10
Safety Self-Destructive Syringe 5m
Safety self destructive syringe 2/
Safety Self-Destructive Syringe 1m
Conventional Syringe 50ml
Conventional Syringe 20ml