1，输液套件 - 采用CE ISO制造商
2，50％的产品适用于欧洲，中东和非洲市场
3，年数达0.1亿PCS
输液器
主要配件：通风口，滴水室，流体过滤器，流量调节器，乳胶管，Luer锁连接器。
用于防止细菌进入，但允许进入ETO气体的具有内螺纹的聚乙烯封闭穿孔装置的保护帽。大约15滴/ ml，20滴/ ml
封闭穿孔装置由白色PVC制成，尺寸符合ISO 1135-4标准。大约15滴/ ml，20滴/ ml，60滴/ ml
滴水室由软PVC制成，尺寸符合ISO 8536-4标准。
聚乙烯流量调节器
软和扭结医疗级PVC管。
根据ISO 594/1和594/2标准，由PVC或聚苯乙烯制成的端子接头保护盖（请求的鲁尔防滑或鲁尔锁适配器）。
端子接头保护帽由聚乙烯制成。
可用选项：
- 有或没有排气的尖峰;
- 带或不带针头;
- 有或没有'Y'注射口; ction端口;
- 鲁尔锁或路厄滑接头;

1, Infusion sets--with CE ISO manufacturer
2, 50% products are for Eur, Midest and Africa markets
3, Annual qty to 0.1billion PCS
Infusion sets
Main accessories: Vented spike, Drip Chamber, fluid Filter, flow regulator, latex tube, Luer Lock connector.
Protective cap for closure piercing device made of polyethylene with internal thread that prevents the bacteria from coming in, but allows the entrance of ETO gas. Apporoximately 15 drops/ml, 20 drops/ml
Closure piercing device made of white PVC, with sizes according to ISO 1135-4 standards. Apporoximately 15 drops/ml, 20 drops/ml ,60drops/ml
Drip chamber made of soft PVC, sizes according to the ISO 8536-4 standards.
Flow Regulator made of polyethylene.
Soft and kink resistant medical grade PVC tubing.
Terminal fitting protective cap (luer slip or Luer-lock adapter upon request) made of PVC or polystyrene, according to the ISO 594/1 and 594/2 standards.
Terminal fitting protective cap made of polyethylene.
Options available:
- With or without air vented spike;
- With or without needle;
- With or without 'Y' injection port;ction port;
- Luer lock or luer slip connector;