HY1660多声道回声测深仪扫描系统是专为港口，运河，河流等浅水体设计的水文回声测深仪。特别适用于大面积浅水测量，检测和定位港口，河流或运河中的碎片或其他导航危险的应用，监测通航水路图形安全深度，监测疏浚或水下施工作业等。
这款基于Windows XP软件的紧凑型多通道回声测深仪不仅采用非常可靠的嵌入式主板和冗余RS232 / 422 / USB端口，还采用了通道控制，图像显示和底部检测等先进技术。 15寸大型LCD显示屏可同时监控2-32通道的深度和底部特性。所有数据以3-D显示，并且使用颜色编码的瀑布显示器实时显示，图形地表示使用不同颜色的共同深度的区域。扫描时，深度数据可以通过RS232 / 422端口同时导出到在同一台计算机上运行的第三部分测量软件。
特征：
特别适用于低于50米的浅水;
频道组合可从2到32同时提供。基于Windows XP和15寸液晶显示器;
配有冗余RS232 / RS422 / USB端口，可输出或输入原始数据。
多通道的水深可以同时存储在计算机的硬盘驱动器中。
事件标记从菜单或手动操作，可以自动搜索。
来自任何通道的原始数据和时间相关的3-D回波图可以显示，在屏幕上重播。
可以将任何运动传感器接口以进行动态补偿。
产品规格：
频道：2-32可应要求提供
范围：10,20,30,40,50米可调
功耗：约80W
工作方式：时间分享，8点
每秒16次不等
脉冲宽度：0.05,0.1,0.2和0.4ms可调
频率：208KHz（波束宽度≤8°）8°）g; )8° )
精度：±（0.01m + 0.1％D），D代表测量深度surveyed
分辨率：1cm
输出功率：50W
TVG曲线：可用
接口：3个RS232端口（COM1，COM3，COM4）
1 rs422 com2端口
其他端口：1个打印机端口，1个以太网网络，2个USB端口
屏幕显示：15寸液晶
硬盘：80G
电源：AC 180V-260V
工作条件：环境温度：0ºC-40ºC;相对湿度：C≤85％：C≤85％85%ity: C≤ 85%
储存条件：环境温度：-40ºC-55º;相对湿度：C≤85％：C≤85％85%ity: C≤ 85%
组成：
主机：
尺寸：430 X 360 X 230mm
重量：15KG
榨汁机：
尺寸：330 X 230 X 110 mm
体重：5KG
电缆长度：10m，重量1kg
传感器：
尺寸：φ80mmX 80mm 80mm 80mm
重量：1.4kg
电缆长度：10m（根据要求可达100m）

HY1660 multi-channel echo sounder sweep system is a hydrographic echo sounder specifically designed for use in harbors, canals, rivers and other shallow bodies of water. Especially for use in those application including large area shallow water surveying, detecting and locating debris or other hazards of navigation in harbors, rivers or canals, monitoring the charted safe depth of navigable waterways, monitoring dredging or underwater construction operations and so on.
This compact, multi-channel echo sounder, based on Windows XP software, employs not only very reliable embedded main board and redundant RS232/422/USB ports, but also those advanced technology involving with channel control, image display and bottom detection. A 15 inch large scale LCD display can simultaneously monitor both 2-32 channels of depth and bottom profile. All data is shown in 3-D and in real time using a color-coded waterfall display which graphically represents areas of common depth using different colors. While sweeping, depth data can be simultaneously exported through a RS232/422 port to the third part survey software running on the same computer.
Features:
Specially suited for use in shallow water below 50 meter;
Channel combination available from 2 to 32 simultaneously. Based on Windows XP and 15 inch LCD display;
Equipped with redundant RS232/RS422/USB ports to output or input raw data.
Water depth from multi-channels can be simultaneously stored in the computer's hard drive permanently.
Event marker operated from menu or by manual and can be searched automatically.
Raw data and a time-related 3-D echogram from any channels can be displayed, replayed on screen.
Any motion sensors can be interfaced to have a dynamic compensation.
Specifications:
Channels: 2-32 available on request
Range: 10, 20, 30, 40, 50 meters adjustable
Power consumption: Approx. 80W
Working mode: Time sharing, 8 pings
16 pings per second vary with the range
Pulse width: 0.05, 0.1, 0.2, and 0.4ms adjustable
Frequency: 208KHz ( beam width ≤ 8° )8° )g; )8° )
Accuracy: ± (0.01m+0.1%D), D stands for the depth surveyedsurveyedsurveyed
Resolution: 1cm
Output Power: 50W
TVG Curve: Available
Interface: 3 RS232 ports (COM1, COM3, COM4)
1 RS422 COM2 port
Other ports: 1 printer port, 1 ethernet network, 2USB ports
Screen display: 15 inches LCD
Hard drive: 80G
Power supply: AC 180V-260V
Working conditions: Ambient temperature: 0º C-40º C; Relative humidity: C≤ 85%ity: C≤ 85%85%ity: C≤ 85%
Storage conditions: Ambient temperature: -40º C-55º ; Relative humidity: C≤ 85%ity: C≤ 85%85%ity: C≤ 85%
Composition:
Main unit:
Dimensions: 430 X 360 X 230mm
Weight: 15KG
Juction box:
Dimension: 330 X 230 X 110 mm
Weight: 5KG
Length of cable: 10m and weight 1kg
Transducer:
Dimensions: φ 80mm X 80mm 80mm 80mm
Weight: 1.4kg
Length of cable: 10m (available up to 100m on request)