该半自动化学分析仪专门用于兽医

光源：6V 10W，卤素灯寿命超过2000小时
光谱仪：干涉滤光片。
波长340nm / 380nm / 405nm / 505nm / 546nm / 578nm / 620nm，一波长。
CML精度：±2nmsmn;为2nmsmn; 2nm
FWHM：≤10nm10nm10nm
杂散光：≤0.5％（吸光度≥2.5）e; 2.5）e; 2.5)
吸光度范围：-0.214〜3.000
吸光度线性度：±1％嗯; 1％usmn; 1%
吸光度重复性：±0.001n; 0.001n; 0.001
吸光度分辨率：0.0001
精度：≤1.0 1.0 1.0
进行：≤1％; 1％; 1%
温度：25ºC/30ºC/37ºC，±0.3ºCordm; C，±0.3ºC0.3º Cordm; C, ± 0.3º C
流通池：永久石英流通池，最小体积为32μL，一次性流通池可选able
添加系统：压力自动补偿泵确保吸吮的准确性
操作系统：VISTA / Windows XP / Windows2000
测试方法：终点/固定时间/动力学
简介：个人资料和计算项目可以轻松设置
加量：200μL〜3000μL0μL; L0μ L
采样体积：10μL〜50μL0μL; L0μ L
反应曲线：实时显示反应曲线
内存：嵌入55个项目参数，可存储200个以上参数，节省超过15000个测试结果，并在工作期间关闭电源时自动恢复结果
QC：自动绘制QC图
试剂：开放试剂系统
显示屏：高亮度LCD
输入：按键和触摸屏
打印机：内置热敏打印机，可连接外部打印机
报告内容：吸光度/浓度/活动，打印细节患者信息和标记异常结果
接口：RS-232串口，可连接电脑
工作环境：温度：10℃〜30℃;湿度：20％RH〜80％RH20％RH〜80％RH20%RH~80%RH
电压：AC 85-264V，根据输入电压自动调整
功耗：≤100W100W100W
质量体系：由TUV和CMD认可

This Semi-auto Chemistry Analyzer is specially for vet

Light Source: 6V 10W, halogen lamp with life time more than 2000 hours
Spectrometer: Interference filter.
Wavelength: 340nm/380nm/405nm/505nm/546nm/578nm/620nm, and one wavelength free.
CML precision: ± 2nmsmn; 2nmsmn; 2nm
FWHM: ≤ 10nm10nm10nm
Stray light: ≤ 0.5%(absorbance≥ 2.5)e; 2.5)e; 2.5)
Absorbance range: -0.214~3.000
Absorbance linearity: ± 1%usmn; 1%usmn; 1%
Absorbance repeatability: ± 0.001n; 0.001n; 0.001
Absorbance resolution: 0.0001
Precision: ≤ 1.0 1.0 1.0
Carry over: ≤ 1%; 1%; 1%
Temperature: 25º C/30º C/37º C, ± 0.3º Cordm; C, ± 0.3º C0.3º Cordm; C, ± 0.3º C
Flow cell: Permanent quartz flow cell, minimal volume is 32μ L, and disposable flow cell Is selectableableable
Adding system: Pressure auto compensation pumps ensure the accuracy of suck
Operational system: VISTA/Windows XP/Windows2000
Test Method: End point/Fixed time/Kinetic
Profile: Profile and calculated item can be easy setting
Adding volume: 200μ L~3000μ L0μ L; L0μ L
Sample volume: 10μ L~50μ L0μ L; L0μ L
Reaction curve: Real time display the reaction curve
Memory: Embed 55 items parameters and can store more than 200 items parameters, save more Than 15000 test results, and auto recover the results if the power is off during working
QC: Auto draw the QC figure
Reagent: Open reagent system
Display: LCD with high brightness
Input: Key button and touch screen
Printer: Inner thermal printer, can be connected to external printer
Report content: Absorbance/concentration/activity, print detail patient information and Mark abnormal results
Interface: RS-232 serial port, can be connected to computer
Working Environment: Temperature: 10º C~30º C; Humidity: 20%RH~80%RH20%RH~80%RH20%RH~80%RH
Voltage: AC 85-264V, auto adapt according to the input voltage
Power Consume: ≤ 100W100W100W
Quality System: Recognized by TUV and CMD