High Quality Automatic Biochemical Analyzer/Biochemistry Analyzer (MSLBA19)
高品质自动生化分析仪/生化分析仪（MSLBA19）
高质量自动生化/生化分析仪（MSLBA19）
生物化学系统功能：
吞吐量：最多300个测试/小时（不包括ISE测试）
测试方法：终点，固定时间，动力学
测试序列：离散，随机访问，STAT可以随时插入，测试序列可以按样品或项目排序
光谱仪：光谱仪和光电二极管的封闭阵列，免维护。
比色杯洗涤：自动洗涤比色皿通过8段洗涤管和连续使用（可选）。
反应检测：同时监测81个比色杯的反应
光度过程：两次连续光度测量之间的间隔时间完全相同。
管道系统：压力自动释放泵和双过滤器，以保护泵和阀门
齿轮：塑料齿轮降低了运动部件的噪声和定位精度
耐环境性：耐灰尘和水蒸气
自动生化分析仪
样品/试剂/搅拌器系统
样品体积：2ul〜30ul，步进0.1ul
样品盘：主管和次级杯的60个位置
试剂体积：20ul〜300ul，步进1ul
试剂盘：提供60个试剂瓶位置
试剂瓶：特定试剂瓶无死体积
试剂冷却：根据peltier原理的连续冷却系统
探头：内壁和外壁高度抛光引线残留<0.1％，水平检测和垂直和水平碰撞保护。
搅拌器：涂有Teflon的桨式搅拌器，在加入样品后立即搅拌。
水消耗：<1.5L /小时
结束：优化的项目测试顺序和强化洗涤过程，降低结转，避免探针凝结。
生物化学系统功能：
吞吐量：最多300个测试/小时（不包括ISE测试）
测试方法：终点，固定时间，动力学
测试序列：离散，随机访问，STAT可以随时插入，测试序列可以按样品或项目排序
光谱仪：光谱仪和光电二极管的封闭阵列，免维护。
比色杯洗涤：自动洗涤比色皿通过8段洗涤管和连续使用（可选）。
反应检测：同时监测81个比色杯的反应
光度过程：两次连续光度测量之间的间隔时间完全相同。
管道系统：压力自动释放泵和双过滤器，以保护泵和阀门
齿轮：塑料齿轮降低了运动部件的噪声和定位精度
耐环境性：耐灰尘和水蒸气
自动生化分析仪
样品/试剂/搅拌器系统
样品体积：2ul〜30ul，步进0.1ul
样品盘：主管和次级杯的60个位置
试剂体积：20ul〜300ul，步进1ul
试剂盘：提供60个试剂瓶位置
试剂瓶：特定试剂瓶无死体积
试剂冷却：根据peltier原理的连续冷却系统
探头：内壁和外壁高度抛光引线残留<0.1％，水平检测和垂直和水平碰撞保护。
搅拌器：涂有Teflon的桨式搅拌器，在加入样品后立即搅拌。
水消耗：<1.5L /小时
结束：优化的项目测试顺序和强化洗涤过程，降低结转，避免探针凝结。
High quality automatic biochemical /biochemistry analyzer (MSLBA19)
Biochistry nlyzer system function:
Throughput: Up to 300 tests/Hour (not including ISE tests)
Test Method: End point, Fixed time, kinetic
Test Sequence: Discrete, Random access, STAT can be inserted at any time, test sequence can be sorted by samples or items
Spectrometer: Enclosed array of spectrometer and photodiodes, maintenance free.
Cuvette washing: Auto wash the cuvettes through 8 segments washing pipe and continuous use them(optional).
Reaction detect: Monitor 81 cuvettes's reaction at the same time
Photometric process: The interval time between tow consecutive photometric are exactly the same.
Pipeline system: Pressure auto released pumps and double filters to protect pumps and valves
Gearing: Plastic gear leads lower noise and accuracy of positioning of moving parts
Environmental resistance: Resistant form dust and water vapor
Automatic biochemical analyzer
Sample/reagent/stirrer system
Sample volume: 2ul~30ul, step by 0.1ul
Sample disc: 60 positions for primary tubes and secondary cups
Reagent volume: 20ul~300ul, step by 1ul
Reagent disc: Provide 60 reagent bottle positions
Reagent bottle: Particular reagent bottle without dead volume
Reagent cooling: Continuous cooling system according to the principle of peltier
Probe: Inner and outer walls are highly polished leads carry-over ﹤0.1%, level detection and vertical and horizontal collision protection.
Stirrer: Paddle stirrer coated with Teflon, stir immediately after the sample was added in.
Water consume: ﹤1.5L/hour
Carry over: Optimized item test sequence and reinforced washing process, lower the carry over and avoid probe being clotted.
Biochistry nlyzer system function:
Throughput: Up to 300 tests/Hour (not including ISE tests)
Test Method: End point, Fixed time, kinetic
Test Sequence: Discrete, Random access, STAT can be inserted at any time, test sequence can be sorted by samples or items
Spectrometer: Enclosed array of spectrometer and photodiodes, maintenance free.
Cuvette washing: Auto wash the cuvettes through 8 segments washing pipe and continuous use them(optional).
Reaction detect: Monitor 81 cuvettes's reaction at the same time
Photometric process: The interval time between tow consecutive photometric are exactly the same.
Pipeline system: Pressure auto released pumps and double filters to protect pumps and valves
Gearing: Plastic gear leads lower noise and accuracy of positioning of moving parts
Environmental resistance: Resistant form dust and water vapor
Automatic biochemical analyzer
Sample/reagent/stirrer system
Sample volume: 2ul~30ul, step by 0.1ul
Sample disc: 60 positions for primary tubes and secondary cups
Reagent volume: 20ul~300ul, step by 1ul
Reagent disc: Provide 60 reagent bottle positions
Reagent bottle: Particular reagent bottle without dead volume
Reagent cooling: Continuous cooling system according to the principle of peltier
Probe: Inner and outer walls are highly polished leads carry-over ﹤0.1%, level detection and vertical and horizontal collision protection.
Stirrer: Paddle stirrer coated with Teflon, stir immediately after the sample was added in.
Water consume: ﹤1.5L/hour
Carry over: Optimized item test sequence and reinforced washing process, lower the carry over and avoid probe being clotted.
