Auto Chemistry Analyzer (MSLBA20)
自动化学分析仪（MSLBA20）
MSLBA20自动化学分析仪
系统功能
吞吐量：高达450次测试/小时（不包括ISE测试）
测试方法：终点，固定时间，动力学
测试序列：离散，随机访问，STAT可以随时插入，测试序列可以按样品或项目排序
光谱仪：光谱仪和光电二极管的封闭阵列，免维护。
比色杯洗涤：自动洗涤比色皿通过8段洗涤管，并连续使用，每个比色杯洗涤12次，然后再次使用它。
光度过程：两次连续光度测量之间的间隔时间完全相同。
管道系统：压力自动释放泵和双过滤器，以保护泵和阀门。
齿轮：塑料齿轮降低了运动部件的噪声和定位精度
耐环境性：耐灰尘和水蒸气
样品/试剂/搅拌器系统
样品体积：2ul〜30ul，步进0.1ul
样品盘：主管和次级杯的60个位置
样品探头：内壁和外壁高度抛光引线残留<0.1％，水平检测和垂直和水平碰撞保护
样品管：主管和次级杯均适用
试剂体积：20ul〜300ul，步进1ul
试剂盘：提供80个试剂瓶，高度抛光铅残留<0.1％，水平检测和垂直和水平碰撞保护
试剂瓶：特定试剂瓶无死体积
试剂冷却：向样品中加入连续冷却系统。
耗水量：6L /小时
结束：优化的项目测试顺序和强化洗涤过程，降低结转，避免探针凝结。
系统功能
吞吐量：高达450次测试/小时（不包括ISE测试）
测试方法：终点，固定时间，动力学
测试序列：离散，随机访问，STAT可以随时插入，测试序列可以按样品或项目排序
光谱仪：光谱仪和光电二极管的封闭阵列，免维护。
比色杯洗涤：自动洗涤比色皿通过8段洗涤管，并连续使用，每个比色杯洗涤12次，然后再次使用它。
光度过程：两次连续光度测量之间的间隔时间完全相同。
管道系统：压力自动释放泵和双过滤器，以保护泵和阀门。
齿轮：塑料齿轮降低了运动部件的噪声和定位精度
耐环境性：耐灰尘和水蒸气
样品/试剂/搅拌器系统
样品体积：2ul〜30ul，步进0.1ul
样品盘：主管和次级杯的60个位置
样品探头：内壁和外壁高度抛光引线残留<0.1％，水平检测和垂直和水平碰撞保护
样品管：主管和次级杯均适用
试剂体积：20ul〜300ul，步进1ul
试剂盘：提供80个试剂瓶，高度抛光铅残留<0.1％，水平检测和垂直和水平碰撞保护
试剂瓶：特定试剂瓶无死体积
试剂冷却：向样品中加入连续冷却系统。
耗水量：6L /小时
结束：优化的项目测试顺序和强化洗涤过程，降低结转，避免探针凝结。
MSLBA20 Auto chemistry analyzer
System function
Throughput: Up to 450tests/Hour(not including ISE tests)
Test Method: End point, Fixed time, kinetic
Test Sequence: Discrete, Random access, STAT can be inserted at any time, test sequence can be sorted by samples or items
Spectrometer: Enclosed array of spectrometer and photodiodes, maintenance free.
Cuvette washing: Auto wash the cuvettes through 8 segments washing pipe and continuous use them, and each cuvette wash 12 times before use it again.
Photometric process: The interval time between tow consecutive photometric are exactly the same.
Pipeline system: Pressure auto released pumps and double filters to protect pumps and valves.
Gearing: Plastic gear leads lower noise and accuracy of positioning of moving parts
Environmental resistance: Resistant form dust and water vapor
Sample/reagent/stirrer system
Sample volume: 2ul~30ul, step by 0.1ul
Sample disc: 60 positions for primary tubes and secondary cups
Sample probe: Inner and outer walls are highly polished leads carry-over ﹤0.1%, level detection and vertical and horizontal collision protection
Sample tube: Both primary tubes and secondary cups are suitable
Reagent volume: 20ul~300ul, step by 1ul
Reagent disc: Provide 80 reagent bottle are highly polished leads carry-over ﹤0.1%, level detection and vertical and horizontal collision protection
Reagent bottle: Particular reagent bottle without dead volume
Reagent cooling: Continuous cooling system to the sample was added in.
Water consume: 6L/hour
Carry over: Optimized item test sequence and reinforced washing process, lower the carry over and avoid probe being clotted.
System function
Throughput: Up to 450tests/Hour(not including ISE tests)
Test Method: End point, Fixed time, kinetic
Test Sequence: Discrete, Random access, STAT can be inserted at any time, test sequence can be sorted by samples or items
Spectrometer: Enclosed array of spectrometer and photodiodes, maintenance free.
Cuvette washing: Auto wash the cuvettes through 8 segments washing pipe and continuous use them, and each cuvette wash 12 times before use it again.
Photometric process: The interval time between tow consecutive photometric are exactly the same.
Pipeline system: Pressure auto released pumps and double filters to protect pumps and valves.
Gearing: Plastic gear leads lower noise and accuracy of positioning of moving parts
Environmental resistance: Resistant form dust and water vapor
Sample/reagent/stirrer system
Sample volume: 2ul~30ul, step by 0.1ul
Sample disc: 60 positions for primary tubes and secondary cups
Sample probe: Inner and outer walls are highly polished leads carry-over ﹤0.1%, level detection and vertical and horizontal collision protection
Sample tube: Both primary tubes and secondary cups are suitable
Reagent volume: 20ul~300ul, step by 1ul
Reagent disc: Provide 80 reagent bottle are highly polished leads carry-over ﹤0.1%, level detection and vertical and horizontal collision protection
Reagent bottle: Particular reagent bottle without dead volume
Reagent cooling: Continuous cooling system to the sample was added in.
Water consume: 6L/hour
Carry over: Optimized item test sequence and reinforced washing process, lower the carry over and avoid probe being clotted.
