Coagulation Analyzer
凝血分析仪
议价
加入意向| 型号。 | zg jrqx004-ca54 |
| 类型 | 凝血分析仪 |
| 证明 | CE＆fdamp; FDAp;FDA |
| 规范 | CE＆pdfmp; PDFp;PDF |
| 分类 | 诊断和监测设备的生理功能 |
| 交货细节 | 根据订单数量，在30天内顺利完成 |
| 商标 | Surecare |
| 起源 | 中国 |
凝血分析仪
型号：zg jrqx004-ca54
特征
测试原理：比浊法分析
零点校正：自动跟踪零点，消除样品和试剂的干扰
波长：470nm
光源：冷光灯，亮度高，使用寿命长
检测器：独特的色散光检测器具有高灵敏度和重复性，免疫对血浆黄疸，溶血，胆汁和浊度的影响
测试通道：四通道，每个通道独立，可同时测试一个或四个相同或不同的项目
孵化器：提供试剂和样品稳定的孵化器，
培养箱温度：37±0.2smn; 0.2smn; 0.2
项目修改：易于添加或编辑项目，易于设置项目参数
校准：单点校准;多点校准;自动存储和校准曲线匹配
质量控制：自动绘制质量数字
试剂：开放试剂系统
试剂量：≤40μL0μL; L0μ L
样品体积：≤40μL0μL; L0μ L
内存：保存超过10000个采样结果，并在工作时关闭电源时自动恢复结果。
重复性：CV≤5％; 5％; 5%
计算项目：S，％，PTR，INR，Fib可以通过PT，这样可以降低试剂的成本
打印机：内置热敏打印机，可连接外部打印机
信息编辑：易于输入和编辑患者的详细信息
接口：RS-232串口，可连接外接打印机和电脑
工作环境：温度：10〜30;湿度：≤70％RH0％RH0%RH
电压：85-264V，根据输入电压自动调整
功率：≤80W80W 80W
质量承诺：CE，ISO，CMD
型号：zg jrqx004-ca54
特征
测试原理：比浊法分析
零点校正：自动跟踪零点，消除样品和试剂的干扰
波长：470nm
光源：冷光灯，亮度高，使用寿命长
检测器：独特的色散光检测器具有高灵敏度和重复性，免疫对血浆黄疸，溶血，胆汁和浊度的影响
测试通道：四通道，每个通道独立，可同时测试一个或四个相同或不同的项目
孵化器：提供试剂和样品稳定的孵化器，
培养箱温度：37±0.2smn; 0.2smn; 0.2
项目修改：易于添加或编辑项目，易于设置项目参数
校准：单点校准;多点校准;自动存储和校准曲线匹配
质量控制：自动绘制质量数字
试剂：开放试剂系统
试剂量：≤40μL0μL; L0μ L
样品体积：≤40μL0μL; L0μ L
内存：保存超过10000个采样结果，并在工作时关闭电源时自动恢复结果。
重复性：CV≤5％; 5％; 5%
计算项目：S，％，PTR，INR，Fib可以通过PT，这样可以降低试剂的成本
打印机：内置热敏打印机，可连接外部打印机
信息编辑：易于输入和编辑患者的详细信息
接口：RS-232串口，可连接外接打印机和电脑
工作环境：温度：10〜30;湿度：≤70％RH0％RH0%RH
电压：85-264V，根据输入电压自动调整
功率：≤80W80W 80W
质量承诺：CE，ISO，CMD
| Model NO. | ZG JRQX004-CA54 |
| Type | Coagulation Analyzer |
| Certification | CE&FDAmp;FDAp;FDA |
| Specification | CE&PDFmp;PDFp;PDF |
| Classification | Physiological Functions of Diagnosis and Monitoring Equipment |
| Delivery Detail | Based on Order Quantity, Commomly Within 30days |
| Trademark | Surecare |
| Origin | China |
Coagulation Analyzer
Model: ZG JRQX004-CA54
Feature
Test Principle: Nephelometric analysis
Zero point correction: Auto track the zero point, eliminate the interferenceof sample and reagent
Wavelength: 470nm
Light Source: Cold Lamp with high brightness and long lifetime
Detector: Unique Dispersion light detector with high sensitivity and repeatability, immunized the effect on result of jaundice, hemolysis, chyle andturbidity on plasma
Test Channel: Four channel, each channel is independent, one or four, same or different items can be tested Simultaneously
Incubator: Provide reagent and sample with stable incubator,
IncubatorTemperature: 37± 0.2smn; 0.2smn; 0.2
Item modify: Easy to add or edit items, easy to set the items parameters
Calibration: Single-point calibration; Multipoint calibration; Auto store and match with calibration curve
Quality control: Auto draw the quality figure
Reagent: Open reagent system
Reagent volume: ≤ 40μ L0μ L; L0μ L
Sample volume: ≤ 40μ L0μ L; L0μ L
Memory: Save more than 10000 samples results, and auto recovering the results when power is off during working.
Repeatability: CV≤ 5%; 5%; 5%
Calculative item: S, %, PTR, INR, Fib can be get through PT, This leads to lower the cost of reagent
Printer: Inner thermal printer, can be connected to external printer
Information edit: Easy to input and edit the detail information of patients
Interface: RS-232 serial port, can be connected to external printer and computer
Working Environment: Temperature: 10~30; Humidity: ≤ 70%RH0%RH0%RH
Voltage: 85-264V, Auto adapt according to the input voltage
Power: ≤ 80W 80W 80W
Quality Commitment: CE, ISO, CMD
Model: ZG JRQX004-CA54
Feature
Test Principle: Nephelometric analysis
Zero point correction: Auto track the zero point, eliminate the interferenceof sample and reagent
Wavelength: 470nm
Light Source: Cold Lamp with high brightness and long lifetime
Detector: Unique Dispersion light detector with high sensitivity and repeatability, immunized the effect on result of jaundice, hemolysis, chyle andturbidity on plasma
Test Channel: Four channel, each channel is independent, one or four, same or different items can be tested Simultaneously
Incubator: Provide reagent and sample with stable incubator,
IncubatorTemperature: 37± 0.2smn; 0.2smn; 0.2
Item modify: Easy to add or edit items, easy to set the items parameters
Calibration: Single-point calibration; Multipoint calibration; Auto store and match with calibration curve
Quality control: Auto draw the quality figure
Reagent: Open reagent system
Reagent volume: ≤ 40μ L0μ L; L0μ L
Sample volume: ≤ 40μ L0μ L; L0μ L
Memory: Save more than 10000 samples results, and auto recovering the results when power is off during working.
Repeatability: CV≤ 5%; 5%; 5%
Calculative item: S, %, PTR, INR, Fib can be get through PT, This leads to lower the cost of reagent
Printer: Inner thermal printer, can be connected to external printer
Information edit: Easy to input and edit the detail information of patients
Interface: RS-232 serial port, can be connected to external printer and computer
Working Environment: Temperature: 10~30; Humidity: ≤ 70%RH0%RH0%RH
Voltage: 85-264V, Auto adapt according to the input voltage
Power: ≤ 80W 80W 80W
Quality Commitment: CE, ISO, CMD
