先进的DSP算法可以减少运动伪影的影响，提高低灌注的测量精度。
2.弹出菜单设置报警限制
3.体积小，重量轻，携带方便。
4.降低功耗，两节AAA电池可连续运行20小时。
5.视觉窗口中的电池低电压指示灯。
6.当设备中没有手指超过8秒钟时，产品将自动关闭电源。
产品规格
显示器：彩色1.0英寸OLED
体积描记图，氧饱和度，脉率，条形图
电池指示灯
弹出菜单
四个显示方向。
氧饱和度范围（％SpO2）0％至100％
脉冲速率范围（bpm）每分钟30至250个脉冲
电源选项
两节AAA电池
20小时典型操作
探测
红光LED波长
为660nm
红外光LED波长940nm
外形尺寸
58mm L * 36mm W * 30mm H
重量
50g带两节电池

1. Advanced DSP algorithm can minish the influence of motion artifact and improve measurement accuracy of low perfusion.
2. Pop-up Menu to setup alarm limits
3. Small size, lightweight and convenient in carrying.
4. Lower power consumption and the two AAA batteries can be operated continuously for 20 hours.
5. Battery low voltage indicator in visual window.
6. The product will automatically be powered off when no finger is in the device for longer than 8 seconds.
Specifications
Displays: Color 1.0 inch OLED
Plethysmogram, Oxygen Saturation, Pulse Rate, Bargraph
Battery Indicator
Pop-up Menu
Four display directions.
Oxygen Saturation Range (%SpO2) 0% to 100%
Pulse Rate Range (bpm) 30 to 250 pulses per minute
Power Options
Two AAA batteries
20 hours typical operation
Probe
Red light LED wavelength
660nm
Infrared light LED wavelength 940nm
Dimensions
58mm L *36mm W* 30mm H
Weight
50g with two batteries