这种Coagulometer是中国质量好的凝血测定仪
产品规格：
测试方法：色散光比浊法分析
测试原则：一阶微分的最高点，百分比分析
零点校正：自动跟踪零点，消除样品和试剂的干扰
波长：470nm
光源：冷光灯，亮度高，使用寿命长
检测器：独特的色散光检测器具有高灵敏度和重复性，免疫效果好
关于血浆黄疸/溶血/胆汁和浊度的结果
测试通道：每个通道是独立的，可以测试一个或多个相同或不同的项目
同时
孵化器：提供试剂和样品稳定的孵化器，
孵化器温度：37±0.2ºCn; 0.2℃rdm;Cn; 0.2ºC
测量触发：通过配置的移液器自动触发测量
项目修改：易于添加或编辑项目，易于设置项目参数
校准：单点校准;多点校准;自动存储和校准曲线匹配
质量控制：自动绘制质量数字
试剂：开放试剂系统
试剂量：≤40μL0μL; L0μ L
样品体积：≤40μL0μL; L0μ L
内存：保存超过10000个采样结果，并在工作时关闭电源时自动恢复结果。
重复性：CV≤5％; 5％; 5%
计算项目：S /％/ PTR / INR，Fib可以通过PT，这样可以降低试剂的成本
打印机：内置热敏打印机，可连接外部打印机
信息编辑：易于输入和编辑患者的详细信息
接口：RS-232串口，可连接外接打印机和电脑
工作环境：温度：10℃〜30℃;湿度：≤70％RH:70％RH%RHty: ≤ 70%RH
电压：85-264V，根据输入电压自动调整
功率：≤80W80W 80W
质量体系：由CE，TUV和CMD认可。
测试项目：
PT
APTT
TT
蛋白原
REPT
VT
AT-III
蛋白质-S
蛋白质-C
啦
HEP
我们的优势：
1：有关我们或我们的产品的所有询问，我们将在24小时内详细回复。
2：我们拥有专业的团队有专业的态度推荐产品和服务。
3：一年免费保修，之后还提供售后服务。
4：我们提供OEM服务，可以在产品上打印自己的标志。
5：我们有非常有经验的工程师，可以帮助您更好地使用我们的产品。

This Coagulometer is good quality Coagulometer in China
Specifications:
Test Method: Dispersion light nephelometric analysis
Test Principle: The highest point on first order differentiation, Percentage analysis
Zero point correction: Auto track the zero point, eliminate the interference of sample and reagent
Wavelength: 470nm
Light Source: Cold Lamp with high brightness and long lifetime
Detector: Unique Dispersion light detector with high sensitivity and repeatability, immunized the effect
On result of jaundice/hemolysis/chyle and turbidity on plasma
Test Channel: Each channel is independent, one or more, same or different items can be tested
Simultaneously
Incubator: Provide reagent and sample with stable incubator,
Incubator Temperature: 37± 0.2ºCn; 0.2ºCrdm;Cn; 0.2ºC
Measure trigger: Auto trigger the measurement through configured pipette
Item modify: Easy to add or edit items, easy to set the items parameters
Calibration: Single-point calibration; Multipoint calibration; Auto store and match with calibration curve
Quality control: Auto draw the quality figure
Reagent: Open reagent system
Reagent volume: ≤ 40μ L0μ L; L0μ L
Sample volume: ≤ 40μ L0μ L; L0μ L
Memory: Save more than 10000 samples results, and auto recovering the results when power is off during working.
Repeatability: CV≤ 5%; 5%; 5%
Calculative item: S/%/PTR/INR, Fib can be get through PT, This leads to lower the cost of reagent
Printer: Inner thermal printer, can be connected to external printer
Information edit: Easy to input and edit the detail information of patients
Interface: RS-232 serial port, can be connected to external printer and computer
Working Environment: Temperature: 10ºC~30ºC; Humidity: ≤ 70%RHty: ≤ 70%RH%RHty: ≤ 70%RH
Voltage: 85-264V, Auto adapt according to the input voltage
Power: ≤ 80W 80W 80W
Quality System: Recognized by CE, TUV and CMD.
Test Items:
PT
APTT
TT
Fib
RepT
VT
AT-III
Protein-S
Protein-C
LA
Hep
Our Advantage :
1: For all your inquires about us or our products , we will reply you in detail within 24 hours.
2: We own professional team have professional attitude to recommend products and services.
3:One year free warranty , after it is still providing after-sales service .
4: We offer OEM services , Can print your own logo on the products .
5:We have very experienced engineers , can help you better use our products .