Veterinary Infant Incubator (NeoCare A)
兽医婴儿孵化器（NeoCare A）
议价
加入意向| 型号。 | Neocare A |
| 商标 | shinova |
| 规范 | ce，iso |
| HS编码 | 90189090 |
| 理论 | 电疗 |
| 运输包装 | 纸板箱 |
| 起源 | 中国 |
兽医孵化器
型号：Neocare A
简单的介绍：
1）空气模式控制，设定温度和空气温度分别显示;
2）自然气流湿度;
3）故障报警指示;
4）RS-232连接器
5）NeoCare A2，NeoCare A3配置有固定的新生儿胆红素光疗设备型号：BLT-90，蓝色荧光灯）
6）NeoCare A2，NeoCare A3配置固定新生儿胆红素光疗设备型号：BLT-90L（带LED蓝灯）
规范：
1）电源：AC220V-230V，50Hz
2）输入功率：850VA
3）控制方式：微电脑进行空气模式控制
4）空气温度控制范围：25ºC-37ºC-37ºCdm; C-37º C
5）温度变化：≤0.5ºC5ºCdm; C5º C
6）均匀度：≤0.8ºC8ºCdm; C8º C
7）罩内噪音：≤60dB（A）B（A）B(A)
8）故障报警：过温报警，偏差报警，传感器故障报警，风扇电机报警，停电报警，系统报警等。
环境要求：
环境温度：20℃〜30℃〜30℃dm; C~30º C
（设定温度应高于环境温度3ºC）ature)
环境风速： <0.3m/s3m/s
包：
每个单位包装为一个纸箱：
尺寸：108.5mm x 64mm x 108mm（NeoCare A / NeoCare A2）
108.5mm x 64mm x 112.5mm（NeoCare A1 / NeoCare A3）
毛重：72Kg（NeoCare A / NeoCare A1）
83Kg（适用于NeoCare A2 / NeoCare A3）
标准配置：
NeoCare A：主体，支架，温度控制器，婴儿隔间，I. V.杆，货架等。
NeoCare A1：基于NeoCare A，加上侧门
NeoCare A2：根据NeoCare A，加入新生儿胆红素光疗设备（固定型）
NeoCare A3：根据NeoCare A1，加入新生儿胆红素光疗设备（固定型）
型号：Neocare A
简单的介绍：
1）空气模式控制，设定温度和空气温度分别显示;
2）自然气流湿度;
3）故障报警指示;
4）RS-232连接器
5）NeoCare A2，NeoCare A3配置有固定的新生儿胆红素光疗设备型号：BLT-90，蓝色荧光灯）
6）NeoCare A2，NeoCare A3配置固定新生儿胆红素光疗设备型号：BLT-90L（带LED蓝灯）
规范：
1）电源：AC220V-230V，50Hz
2）输入功率：850VA
3）控制方式：微电脑进行空气模式控制
4）空气温度控制范围：25ºC-37ºC-37ºCdm; C-37º C
5）温度变化：≤0.5ºC5ºCdm; C5º C
6）均匀度：≤0.8ºC8ºCdm; C8º C
7）罩内噪音：≤60dB（A）B（A）B(A)
8）故障报警：过温报警，偏差报警，传感器故障报警，风扇电机报警，停电报警，系统报警等。
环境要求：
环境温度：20℃〜30℃〜30℃dm; C~30º C
（设定温度应高于环境温度3ºC）ature)
环境风速： <0.3m/s3m/s
包：
每个单位包装为一个纸箱：
尺寸：108.5mm x 64mm x 108mm（NeoCare A / NeoCare A2）
108.5mm x 64mm x 112.5mm（NeoCare A1 / NeoCare A3）
毛重：72Kg（NeoCare A / NeoCare A1）
83Kg（适用于NeoCare A2 / NeoCare A3）
标准配置：
NeoCare A：主体，支架，温度控制器，婴儿隔间，I. V.杆，货架等。
NeoCare A1：基于NeoCare A，加上侧门
NeoCare A2：根据NeoCare A，加入新生儿胆红素光疗设备（固定型）
NeoCare A3：根据NeoCare A1，加入新生儿胆红素光疗设备（固定型）
| Model NO. | Neocare A |
| Trademark | SHINOVA |
| Specification | CE, ISO |
| HS Code | 90189090 |
| Theory | Electrotherapeutics |
| Transport Package | Carton |
| Origin | China |
Veterinary Infant Incubator
Model: Neocare A
Brief introduction:
1)Air mode control, set temperature and air temperature are displayed separately;
2)Natural air flow humidity;
3)Failure alarm indication;
4)RS-232 connector
5)NeoCare A2, NeoCare A3 are configured with fixed Neonate Bilirubin Phototherapy Equipment model: BLT-90 with blue fluorescence lamps)
6)NeoCare A2, NeoCare A3 are configured with fixed Neonate Bilirubin Phototherapy Equipment model: BLT-90L (with LED blue lights)
Specification:
1)Power supply: AC220V-230V, 50Hz
2)Input power: 850VA
3)Mode of control: Air mode control by micro-computer
4)Control range of air temperatur: 25º C-37º C-37º Cdm; C-37º C
5)Variability of temperature: ≤ 0.5º C5º Cdm; C5º C
6)Uniformity of temperature: ≤ 0.8º C8º Cdm; C8º C
7)Noise inside hood: ≤ 60dB(A)B(A)B(A)
8)Failure alarm: Over temperature alarm, deviation alarm, sensor failure alarm, fan motor alarm, power failure alarm, system alarm and so on.
Requirements of environment:
Environment temperature: 20º C~30º C~30º Cdm; C~30º C
(Set temperature should be higher 3º C than the environment temperature)ature)ature)
Wind speed of environment: <0.3m/s3m/s
Package:
Each unit is packed as one carton:
Size: 108.5mm x 64mm x 108mm (NeoCare A/NeoCare A2)
108.5mm x 64mm x 112.5mm (NeoCare A1/NeoCare A3)
Gross Weight: 72Kg (for NeoCare A/NeoCare A1)
83Kg (for NeoCare A2/NeoCare A3)
Standard configuration:
NeoCare A: Main body, stand, temperature controller, baby compartment, I. V. Pole, shelf and so on.
NeoCare A1: Based on NeoCare A, added with the side door
NeoCare A2: Based on NeoCare A, added with the Neonate bilirubin phototherapy equipment (fixed model)
NeoCare A3: Based on NeoCare A1, added with the Neonate bilirubin phototherapy equipment (fixed model)
Model: Neocare A
Brief introduction:
1)Air mode control, set temperature and air temperature are displayed separately;
2)Natural air flow humidity;
3)Failure alarm indication;
4)RS-232 connector
5)NeoCare A2, NeoCare A3 are configured with fixed Neonate Bilirubin Phototherapy Equipment model: BLT-90 with blue fluorescence lamps)
6)NeoCare A2, NeoCare A3 are configured with fixed Neonate Bilirubin Phototherapy Equipment model: BLT-90L (with LED blue lights)
Specification:
1)Power supply: AC220V-230V, 50Hz
2)Input power: 850VA
3)Mode of control: Air mode control by micro-computer
4)Control range of air temperatur: 25º C-37º C-37º Cdm; C-37º C
5)Variability of temperature: ≤ 0.5º C5º Cdm; C5º C
6)Uniformity of temperature: ≤ 0.8º C8º Cdm; C8º C
7)Noise inside hood: ≤ 60dB(A)B(A)B(A)
8)Failure alarm: Over temperature alarm, deviation alarm, sensor failure alarm, fan motor alarm, power failure alarm, system alarm and so on.
Requirements of environment:
Environment temperature: 20º C~30º C~30º Cdm; C~30º C
(Set temperature should be higher 3º C than the environment temperature)ature)ature)
Wind speed of environment: <0.3m/s3m/s
Package:
Each unit is packed as one carton:
Size: 108.5mm x 64mm x 108mm (NeoCare A/NeoCare A2)
108.5mm x 64mm x 112.5mm (NeoCare A1/NeoCare A3)
Gross Weight: 72Kg (for NeoCare A/NeoCare A1)
83Kg (for NeoCare A2/NeoCare A3)
Standard configuration:
NeoCare A: Main body, stand, temperature controller, baby compartment, I. V. Pole, shelf and so on.
NeoCare A1: Based on NeoCare A, added with the side door
NeoCare A2: Based on NeoCare A, added with the Neonate bilirubin phototherapy equipment (fixed model)
NeoCare A3: Based on NeoCare A1, added with the Neonate bilirubin phototherapy equipment (fixed model)
