Bogie Testing Bench
转向架测试台
议价
加入意向 应用
设备采用先进的计算机管理系统，可以通过传感器监测测试期间的负载变化和位移。在整个过程中使用电脑控制，实现存储，编辑，打印，分析等功能。它也可以在屏幕上警告不合格的项目。用于转向架的静载试验台用于机车，乘用车，子弹，地铁和城市轨道车辆的转向架静载试验和静压试验（吨压试验），与设计用于组装和测试相对尺寸。
组成
试验台的标准配置由龙门架，导轨和底座，定心装置（纵向），称重系统，四角高度测量系统和测量控制系统组成。轴距测量系统是可选的，可以根据客户需要添加。
主要技术参数
设备采用先进的计算机管理系统，可以通过传感器监测测试期间的负载变化和位移。在整个过程中使用电脑控制，实现存储，编辑，打印，分析等功能。它也可以在屏幕上警告不合格的项目。用于转向架的静载试验台用于机车，乘用车，子弹，地铁和城市轨道车辆的转向架静载试验和静压试验（吨压试验），与设计用于组装和测试相对尺寸。
组成
试验台的标准配置由龙门架，导轨和底座，定心装置（纵向），称重系统，四角高度测量系统和测量控制系统组成。轴距测量系统是可选的，可以根据客户需要添加。
主要技术参数
| 最低高度至轨面（mm） | 1567 |
| 从台面到轨道表面的最大高度（mm） | 2592 |
| 升高高度（mm） | 1025 |
| 提升速度（m / min） | 3（可调） |
| 最大有效悬臂（mm） | 2600 |
| 额定载荷（kg） | 500 |
| 运行速度（m / min） | 轨道：6（可调节） 地面：20（可调，最大= 28m / min，平地） |
| 成绩能力 | ≤10％; 10％;10% |
| 电源 | 电池：DC 48V |
| 油泵电机 | xqd-5 48v 5kw，n = 1500rpm |
| 齿轮泵 | CB-FA25-FL 25.36ml / r 6.3Mpa 1500rpm |
| 水电机 | BM6-625 6256ml / r 6.3Mpa 470Nm BM6-625 6256ml / r 6.3Mpa扭矩470Nm |
| 尺寸（长*宽*高）（mm） | 放下台面：5855 X 2500 X 3630 放下台面：3400 X 2500 X 3630 |
Application
The equipment adopts advanced computer management system and can monitor load changing and displacement during the test by senor. It uses computer control and can realize the storage, edit, print, analysis and other functions during the whole process. It can also warn the unqualified items on the screen. Static load test stand for bogie is used for the bogie static load test and static pressure test (ton pressure test) of locomotives, passenger cars, bullet trains, subway and urban railway vehicles, working together with non-standard testing equipment designed for assembling and testing relative dimensions.
Composition
The standard configuration of the test stand consists of gantry main frame, rail and base, centering device (longitudinal direction), weighing systems, four corners height measuring systems and measurement control system. The wheelbase measurement system is optional and could be added according to customer's need.
Main Technical Parameters
The equipment adopts advanced computer management system and can monitor load changing and displacement during the test by senor. It uses computer control and can realize the storage, edit, print, analysis and other functions during the whole process. It can also warn the unqualified items on the screen. Static load test stand for bogie is used for the bogie static load test and static pressure test (ton pressure test) of locomotives, passenger cars, bullet trains, subway and urban railway vehicles, working together with non-standard testing equipment designed for assembling and testing relative dimensions.
Composition
The standard configuration of the test stand consists of gantry main frame, rail and base, centering device (longitudinal direction), weighing systems, four corners height measuring systems and measurement control system. The wheelbase measurement system is optional and could be added according to customer's need.
Main Technical Parameters
| Lowest Height to Rail Surface (mm) | 1567 |
| Max Height from Countertop to Rail Surface (mm) | 2592 |
| Elevating Height (mm) | 1025 |
| Elevating Speed (m/min) | 3 (adjustable) |
| Max Effective Cantilever (mm) | 2600 |
| Rated Load (kg) | 500 |
| Running Speed (m/min) | Rail: 6 (adjustable) Ground: 20 (adjustable, max=28m/min, flat ground) |
| Grade Ability | ≤10%;10%;10% |
| Power Supply | Battery: DC 48V |
| Oil Pump Motor | XQD-5 48V 5KW, n=1500rpm |
| Gear Pump | CB-FA25-FL 25.36ml/r 6.3Mpa 1500rpm |
| Hydrolic Motor | BM6-625 6256ml/r 6.3Mpa 470Nm BM6-625 6256ml/r 6.3Mpa Torque 470Nm |
| Dimension (length*width*height) (mm) | Lay down the countertop: 5855 X 2500 X 3630 Lay down the countertop: 3400 X 2500 X 3630 |
