Bogie Disassembling and Assembling Shared Equipment (elevating work platform)
转向架拆卸和组装共用设备（升降工作平台）
议价
加入意向 转向架拆卸和组装共享设备（升降工作平台）
应用
转向架拆装（组装）共用装置是维修车间转向架与轮对车轮轴承之间的相关设备。主要用于将铁路车辆转向架提升到合适的高度，方便拆卸，清理，组装，测量和检查转向架上的所有安装部件。
组成
转向架拆卸和组装共享设备（升降工作平台）由升降装置，支架，主侧轮，滚子框架，活动盖，地面盖和电气控制系统组成。
主要技术参数
| 设备起吊能力 | 240 kn |
| 每个起重机的起重能力 | 50 kn |
| 最大提升高度（高于地面）（mm） | 1500 |
| 升降速度（毫米/分钟） | ≤400; 400;400 |
| 四个起重机同步误差（mm） | ≤±4E;±4lusmn;4e;±4 |
| 纵向导轨间隙（mm） | ≤8le; 8le;8 |
| 接口高差（mm） | ≤±2E;±2lusmn;2e;±2 |
| 侧面错位接口（mm） | ≤±2E;±2lusmn;2e;±2 |
| 设备功率（KW） | ≤15; 15; 15 |
| 设备重量 | ≈≈asymp;≈8600公斤/套 |
| 电气系统防护等级 | >= IP54 |
| 电机绝缘等级 | >= F级 |
| 噪声 | < 78dB(A)B(A) |
Bogie Disassembling and Assembling Shared Equipment (elevating work platform)
Application
Bogie disassembling (assembling) shared device is the associated equipment between bogie and wheel-to-wheel bearing in the maintenance garage. It is mainly used to elevate the railway vehicle bogie to a suitable height which is convenient to disassemble, clear, assemble, measure and check all the installation parts on bogie.
Composition
Bogie Disassembling and Assembling Shared Equipment (elevating work platform) is composed by lifting device, brace, main side wheel, roller frame, activities cover, ground cover and electrical control systems.
Main Technical Parameters
| Lifting Capacity of Equipment | 240 KN |
| Lifting Capacity of each Lifting-post | 50 KN |
| Max Lifting Height (above ground) (mm) | 1500 |
| Speed of Elevating and Falling (mm/min) | ≤400;400;400 |
| Synchronic Error of Four Lifting Unit (mm) | ≤±4e;±4lusmn;4e;±4 |
| Longitudinal Rail Gap (mm) | ≤8le;8le;8 |
| Height Difference of Interface (mm) | ≤±2e;±2lusmn;2e;±2 |
| Lateral Misplace of Interface (mm) | ≤±2e;±2lusmn;2e;±2 |
| Power of Equipment (KW) | ≤ 15; 15; 15 |
| Weight of Equipment | ≈≈asymp;≈8600 Kg/set |
| Protection Grade of Electrical System | >= IP54 |
| Insulation Grade of Motor | >= F Grade |
| Noise | < 78dB(A)B(A) |
