10ml Lure Slip Steriled Disposable Syringe
10ml Lure Slip一次性注射器
议价
加入意向| 型号。 | yd1010 |
| 材料 | 塑料 |
| 应用 | 医 |
| 证明 | ce，sgs，fda，iso13485 |
| 针 | 用针 |
| 消毒 | 消毒 |
| 医疗器械注册/记录号 | ssyjxzz-2001-0249 |
| 运输包装 | 100PCS / Box，16盒/ CTN，640卡顿/ 40hq |
| 起源 | 中国 |
| 类型 | 注射器 |
| 卷 | 10毫升 |
| 特征 | 一次性 |
| 组 | 成人 |
| 注射器使用 | 高精度实验 |
| 医疗器械监管类型 | 类型3 |
| 商标 | OEM |
| 规范 | 1ml，3ml，5ml，10ml，20ml，30ml，50ml，60ml，100ml |
| HS编码 | 90183900 |
一次性注射器，用于皮下注射，肌内注射和静脉注射。
1.通过EO气体灭菌，无毒，无致热，仅一次使用。
鲁尔滑
3.足够透明的桶容易测量注射器中容纳的体积和气泡的检测。
桶上刻度刻度很容易阅读。毕业印刷由不可磨灭的墨水。
柱塞非常适合于柱塞内部，以便自由平稳运动。
桶和柱塞材料：医用级PP（聚丙烯）。
7.垫片材质：天然胶乳/合成橡胶（无胶乳）。
有或没有针。
9.个人包装：吸塑包/袋子。
10.可用尺寸：1mL，2mL（2.5mL），3mL，5mL，10mL，20mL，30mL，50mL，60mL。
标准：iso和ce，gmp。
1.通过EO气体灭菌，无毒，无致热，仅一次使用。
鲁尔滑
3.足够透明的桶容易测量注射器中容纳的体积和气泡的检测。
桶上刻度刻度很容易阅读。毕业印刷由不可磨灭的墨水。
柱塞非常适合于柱塞内部，以便自由平稳运动。
桶和柱塞材料：医用级PP（聚丙烯）。
7.垫片材质：天然胶乳/合成橡胶（无胶乳）。
有或没有针。
9.个人包装：吸塑包/袋子。
10.可用尺寸：1mL，2mL（2.5mL），3mL，5mL，10mL，20mL，30mL，50mL，60mL。
标准：iso和ce，gmp。
| 样品名称 | 一次性注射针与针 | 批量 | 20120204 | ||||
| 类型 | 10ml 22G * 11/4 | 制作日期 | 20120204 | ||||
| 数量 | 1084800pcs | 串口LOT | 20120204 | ||||
| 测试标准 | GB15810-2001和发票NO.YD-T111228 | 过期日期 | 20170204 | ||||
| 测试项目 | 标准要求和标准条款和条件 | 测试结果 | |||||
| 生物学特性 | 不育症 | 应无菌 | 合格 | ||||
| 热原 | 没有热原 | 合格 | |||||
| 化学性质 | 易氧化物质 | 与相同批次和相同体积的对比液相比，高锰酸钾的消耗量为0.002mol /L≤0.5Ml单位：mL（5.11.3）1.3）1.3) | 0.35 | ||||
| pH值 | 与同批次造影液相比，不超过1.0PH（5.11.2） | 0.42 | |||||
| 环氧乙烷 | 初始量≤10mg/ g单位：mg / g（5.11.4）1.4）1.4) | 0.19 | |||||
| 物理 属性 | 外锥点 | 符合GB 1962 / T规定;无水滴; 没有明显的连续气泡形成;不能 分离;没有发生应力裂纹。 | 合格 | ||||
| 容许容许容限 | 标称体积的四分之一：±4％（mL）（5.10.3）L）（5.10.3）L) (5.10.3) | 合格 | |||||
| 设备密封特性 | 无水滴;无窜气时，活塞和芯棒不能分离 | 合格 | |||||
| 打印测量尺 | 侧针样式：在锥体的相对侧打印 | 合格 | |||||
| 中心针样式：在气缸短轴随机侧打印 | |||||||
| 标尺要求 | 1mL≥57mm;2-3mL≥27mm;5mL≥36mm;10mL≥44mm;20mL≥52mm;单位：mme; 52mm;单位：mme;52mm; unit: mm | 57.8 | |||||
| 滑动性能 | 最大起动张力≤25N;推力：不超过（2.0XF）或（F + 1.5N），选择最大值;最小值。推力：不小于（2.0X F）或（F-1.5N），选择最大值;平均推力：≤10N; le; 10N;le;10N; | 合格 | |||||
| 橡胶活塞 | 无橡胶线，废料，异物; 当活塞与外筒接合时，芯棒可以自重移动 | 合格 | |||||
| 外观要求 | 清洁，无杂质; 无边缘，毛刺，塑料流动等缺陷 | 合格 | |||||
| 剩余数量 | 1-3ml≤0.07mL; 5ml≤0.075mL; 10ml≤0.10mL; 0.10mL;; 0.10mL ; 20ml≤0.15mL;单位：mL：mL: mL | 0.089 | |||||
| 个人套餐 | 符合合同要求 | 合格 | |||||
| 锥体要求 | ≥1.2mm，2毫米2mm, | 合格 | |||||
| 量表毕业线 | 与活塞基线一致;偏差不超过1/4分钟。部门;应为主要分部线的1/2 | 合格 | |||||
| 测试结果 | 合格 | ||||||
| Model NO. | YD1010 |
| Material | Plastic |
| Application | Medical |
| Certification | CE, SGS, FDA, ISO13485 |
| Needle | With Needle |
| Disinfection | Disinfection |
| Medical Devices Reg./Record No. | ssyjxzz-2001-0249 |
| Transport Package | 100PCS/Box, 16boxes/CTN, 640carton/40hq |
| Origin | CHINA |
| Type | Syringe |
| Volume | 10ml |
| Feature | Disposable |
| Group | Adult |
| Syringe Use | High Precision Experiments |
| Medical Device Regulatory Type | Type 3 |
| Trademark | OEM |
| Specification | 1mL,,3mL, 5mL, 10mL, 20mL, 30mL, 50mL,60ML,100ML |
| HS Code | 90183900 |
Disposable syringe for hypodermic, intramuscular and intravenous injection.
1. Sterilized by EO gas, non-toxic, non-pyrogenic, single use only.
2. Luer Slip
3. Sufficiently transparent barrel allows easy measurement of the volume contained in the syringe and detection of air bubble.
4. Graduated scale on the barrel is easy to read. Graduation is printed by indelible ink.
5. The plunger fits the inside of barrel very well to allow for free and smooth movement.
6. Material for barrel and plunger: Medical grade PP(polypropylene).
7. Material for gasket: Natural latex / Synthetic rubber(latex free).
8. With or without needle.
9. Individual pack: Blister pack / Polybag.
10. Available size: 1mL, 2mL(2.5mL), 3mL, 5mL, 10mL, 20mL, 30mL, 50mL, 60mL.
11. Standard: ISO AND CE, GMP.
1. Sterilized by EO gas, non-toxic, non-pyrogenic, single use only.
2. Luer Slip
3. Sufficiently transparent barrel allows easy measurement of the volume contained in the syringe and detection of air bubble.
4. Graduated scale on the barrel is easy to read. Graduation is printed by indelible ink.
5. The plunger fits the inside of barrel very well to allow for free and smooth movement.
6. Material for barrel and plunger: Medical grade PP(polypropylene).
7. Material for gasket: Natural latex / Synthetic rubber(latex free).
8. With or without needle.
9. Individual pack: Blister pack / Polybag.
10. Available size: 1mL, 2mL(2.5mL), 3mL, 5mL, 10mL, 20mL, 30mL, 50mL, 60mL.
11. Standard: ISO AND CE, GMP.
| Name of Sample | Disposable Syringe With Needle | LOT | 20120204 | ||||
| Type | 10ml 22G*11/4 | MFG DATE | 20120204 | ||||
| Quantity | 1084800PCS | Serial LOT | 20120204 | ||||
| Testing Standards | GB15810-2001and Invoices NO.YD-T111228 | EXP DATE | 20170204 | ||||
| Testing Items | Standard Requirement And Standard Term And Conditions | Test Result | |||||
| Biological Properties | Sterility | Should be Sterile | Eligible | ||||
| Pyrogen | No pyrogen | Eligible | |||||
| Chemical Properties | Readily Oxidizable Substance | Comparing with the contrast liquid with same batch and same volume, the consumption deference of potassium permanganate 0.002mol/L≤0.5Ml unit: mL (5.11.3)1.3)1.3) | 0.35 | ||||
| pH | Comparing with contrast liquid in the same batch, not more than 1.0PH (5.11.2) | 0.42 | |||||
| Ethylene Oxide | Rudimental quantity ≤10mg/g unit: mg/g (5.11.4)1.4)1.4) | 0.19 | |||||
| Physics Properties | Outer Conical Point | Meet regulations in GB 1962/T;No water drop; Without obvious continuous bubbles formed;Can't be separated;No stress cracks occurred. | Eligible | ||||
| Permissible Tolerance Of Capacity | ≥half of nominal volume: ±4%(mL) (5.10.3)L) (5.10.3)L) (5.10.3) | Eligible | |||||
| Device Sealing Character | No water drops;Without blow-by, the piston and core bar can't be separated | Eligible | |||||
| Printing Of Measuring Scale | Side Needle Style:Print at the opposite side of cone | Eligible | |||||
| Center Needle Style:Print at random side of minor axis of cylinder | |||||||
| Ruler Requirement | 1mL≥57mm;2-3mL≥27mm;5mL≥36mm ;10mL≥44mm;20mL≥52mm; unit: mme;52mm; unit: mme;52mm; unit: mm | 57.8 | |||||
| Sliding Performance | Max starting tensile force ≤25N;Max. Thrusting force: not more than(2.0XF) or (F+1.5N), choose the maximum value;Min. Thrusting force: not less than(2.0X F) or (F-1.5N), choose the maximum value;Average thrusting force: ≤10N;le;10N;le;10N; | Eligible | |||||
| Rubber Piston | Without rubber thread, scrap, foreign bodies; When piston engaging with outer cylinder, the core bar can be move resulting from self weight | Eligible | |||||
| Appearance Requirement | Clean, without impurity ; No raw edge, burr, plastic flow etc flaws | Eligible | |||||
| Residual Quantity | 1-3ml ≤ 0.07mL; 5ml ≤ 0.075mL;10ml ≤ 0.10mL ;; 0.10mL ;; 0.10mL ; 20ml ≤ 0.15mL; Unit: mL: mL: mL | 0.089 | |||||
| Individual Package | Meets the contract requirement | Eligible | |||||
| Cone Requirement | ≥1.2mm,2mm,2mm, | Eligible | |||||
| Graduation Line Of Measuring Scale | Coincide with piston baseline; the deviation is not more than 1/4 min. Division;Should be 1/2 of major division lines | Eligible | |||||
| Testing Results | Eligible | ||||||
