1.有效的冷却系统性能好，确保治疗头和钯的使用寿命长，保证治疗顺利。

2.10Hz频率可用，快速永久脱毛，具有运动治疗，大面积治疗高性价比。

来自德国Jenoptik的钯激光器，发出纯正稳定的光线，精准而专业。

4.选择不同皮肤类型和头发类型的专家系统，适用于不同的皮肤和各种皮肤，包括晒黑的皮肤

长期连续工作24小时不间断;确保在繁忙的诊所/沙龙工作稳定

6.简单易用的人性化软件设计，学习。

7.水流保护系统，水位和水温，安全专业。

虽然有许多方法来消除不需要的头发，但很少有可以消除头发再生，同时使周围的皮肤无损伤。激光去除很快成为最流行的。 808nm二极管激光技术与以前的系统不同，能量深入渗透到具有高平均功率和快速10脉冲每秒重复率的真皮（毛囊所在的位置）。激光使用选择性光热解原理来消除头发及其潜在的再生，而不损害周围的皮肤。在激光脱毛治疗期间，光通过皮肤并被毛干中的黑色素吸收。这种吸收提高了毛囊的温度，并且热破坏了负责再生长的细胞。选择激光的属性（波长，脉冲持续时间和功率）来确保对这些细胞的损伤，而不是皮肤的其余部分

1.808nm二极管激光脱毛系统采用最先进的技术渗透;机制性能更好，临床效果好，安全性好;

首先处理效果优良，适合所有类型的头发;

3.高能量：无色素沉着，适合各类头发颜色高效;

4.激光宽度：有效为毛囊产生积热，永久脱毛;

五种不同种类的治疗头包括真空辅助技术; 30x55mm，15 *27毫米; 15 *15毫米; 12 *12毫米; 9 *9毫米。可以适应不同的治疗尺寸;

电源模块设计适用于进出口业务。维修方便;

7.恒温恒温水循环系统保证半导体泵由于过热而不能燃烧空腔;

8.自检和自动保护机制，确保稳定;

专业美容师和皮肤科医生一起做出完美的治疗方案。

10. CE，ISO 13485认证，证书测试报告。

1.永久治疗各种颜色的头发：唇发，胡须，胸前发，背部毛发，腋毛，腿部毛发和比基尼线以外的不需要的头发。

2.有效治疗雀斑和痤疮等

3.有效治疗皮肤干燥，皮肤粗糙有效治疗大孔，细皱纹，发红

4.有效皮肤美白和收紧，减少皮肤弹性/皮肤光滑

激光类型

半导体激光器

激光波长

为808nm

脉冲宽度

10〜400毫秒

脉冲输出频率

1〜10Hz的

显示

8.4 / 10.4寸彩色触摸屏

功率

600w＆1000w1000w1000W

激光二极管

13PCS＆20PCS激光棒条 bars

冷却

半导体冷却+水冷+空气冷却+蓝宝石冷却系统

输出功率

2000w＆3500w3500w3500W

现货尺寸

9x9mm，12x12mm，15x15mm，15x27mm，30x55mm，15x27mm真空辅助

探头温度

-10-0°CDEG; C ^deg;C

问：是否有其他语言（如德语，土耳其语）规范？

答：我们的规范以英文为标准，因为如果翻译成另一种语言可能是某些单词的含义不准确。

问：什么样的制冷系统？

答：我们采用双冷却系统：半导体制冷，水循环（热水泵，水箱，风机）

问：立式和便携式机器有什么区别？

A：除了屏幕尺寸和形状不同外，内部配置是一样的。 （大型机器带脚轮，便于移动，小机器较轻）。

问：治疗期间我应该用冷凝胶吗？

A：不需要，激光不像光，冷凝胶使皮肤和光源完全集成，但会削弱激光能量输出。

问：治疗之前，我应该用一些大麻膏或者一种吗？

答：一般来说，不需要。但对于敏感的皮肤，使用麻醉会感觉更舒适。问：如果手柄很有用，应该用新的手柄还是更换配件？

A：我们建议您使用新的手柄，如果您想更换配件，旧的手柄应该发送到原厂，因为它应该由我们的专业工程师修理，并且还需要一个干净的环境。

1.Effective cooling system high performance, make sure long service life of the treatment head and palladium, guarantee comfortable treatment procedure.

2. 1-10Hz frequency available, fast permanent hair removal, with in motion treatment, big area treatment high cost-effective.

3.Palladium laser from Jenoptik Germany, emit pure and stable light, precise and professional.

4. Expert system for select different skin type and hair type, suit to different pacients and all kinds of skin including tanned skin

5. long continuous working 24 hours with non-stop; ensure stable function in busy clinic/salons

6.simple and humanized software design easy to operate and learn.

7.protection system of water flow, water level and water temperature, safe and professional.

While there are many methods to eliminate unwanted hair, very few can eliminate hair regrowth while leaving the surrounding skin undamaged. And laser remove is quickly becoming the most popular. 808nm diode laser technology, unlike earlier systems, energy penetrates deep into the dermis (where the hair follicle is located) with high average power and a rapid 10 pulse-per-second repetition rate. Lasers use the principle of selective photothermolysis to eliminate hair and its potential regrowth without damaging the surrounding skin. During a laser hair removal treatment, light passes through the skin and is absorbed by the melanin in the hair shaft. This absorption raises the temperature of the hair follicle and thermally destroys the cells responsible for regrowth. The attributes of the laser (wavelength, pulse duration and power) are chosen to ensure damage to these cells and not to the rest of the skin

1.808nm diode laser hair removal system uses the most advanced technology that penetrates; more assured the mechanism performance, clinical results, and safety;

2.Excellent treatment result can be expected at the first treatment and suitable to all types of hair;

3.High energy: no pigmentation, suitable to all types of hair color and high efficiency;

4.Long laser width: Effective for the hair follicles produce heat accumulation, Permanent hair removal;

5.Five different kinds of treatment head including vacuum-assist Tech; 30x55mm,15*27mm; 15*15mm; 12*12mm; 9*9mm. can fit different treatment size;

6.The power module design is suitable for import and export business. It is convenient to maintenance;

7.Best thermostatic water cycle system guarantee semiconductor pump can't burn cavities due to overheating;

8.Self-checking and auto-protection mechanism to ensure the stability;

9.Professional beautician and Dermatologist make perfect therapeutic schedule together.

10. CE, ISO 13485 approval, testing report for the certificates.

1. Permanent treatment for all kinds color of Hair: Lip hair, beard, chest hair, back hair, arm hair, leg hair, and unwanted hair outside the bikini line.

2. Effective treatment freckles and acne, etc

3. Effective treatment for dry skin, rough skin Effective treatment for large pores, fine wrinkles, redness

4. Effective for skin whitening and tightening, reduced skin elasticity/ dull skin

Laser Type

Semiconductor laser

Laser Wavelength

808nm

Pulse width

10~400ms

Pulse output frequency

1~10Hz

Display

8.4/10.4 inch color touch screen

Power

600W & 1000W1000W1000W

laser diode

13PCS & 20PCS laser barsr bars bars

Cooling

Semiconductor cooling + water cooling + air cooling +Sapphire cooling system

Output Power

2000w & 3500W3500W3500W

Spot size

9x9mm,12x12mm,15x15mm,15x27mm, 30x55mm, 15x27mm vacuum assist

Temperature of probe

-10-0°Cdeg;Cdeg;C

Q: Are there other language (such as German, Turkish) specification?

A:Our specification in English as a standard, because if translated into another language may be the meaning of some words are not accurate.

Q: What's kind of refrigeration system?

A: We adopted double cooling system: semiconductor refrigeration, water cycle (heat, water pump, water tank, fan)

Q: what's the different between Vertical and portable machines?

A: In addition to the screen size and shape is different, the internal configuration is the same. (large machine with castor, facilitate mobile, small machine were lighter).

Q:should I use cold gel during the Treatment?

A:Do not need,laser unlike light, cold gel making the skin and source fully integrated, but it will weaken the laser energy output.

Q:Should I use some hemp cream or anodyne before the treatment?

A:Generally speaking, do not need. But for sensitive skin, using anesthesia will feeling more comfortable. Q:If the handle is useful ,should I by a new handle or change the accessories?

A:We suggest you by a new handle,if you want change the accessories,the old handle should be send to the original factory,because it should be repair by our Professional engineer and also require a clean environment.