17 Inch Modular Multi-Parameter Patient Monitor, ECG EKG Monitor, Touch Screen Handheld Vital Signs 12-Leads ECG Monitor, IBP Monitor (SC-C90)
17 Inch Modular Multi-Parameter Patient Monitor, ECG EKG Monitor, Touch Screen Handheld Vital Signs 12-Leads ECG Monitor, IBP Monitor (SC-C90)
17英寸模块化多参数患者监护仪，ECG EKG监护仪，触摸屏手持式生命体征12导联心电图监护仪，IBP监护仪（SC-C90）
议价
加入意向| 型号。 | SC-C90 |
| 类型 | 患者/胎儿/母亲监护仪 |
| 组 | 所有患者 |
| 规范 | G。 w：23kg |
| HS编码 | 90181930 |
| 分类 | 医疗诊断设备 |
| 证明 | ce，iso13485 |
| 医疗器械监管类型 | 类型2 |
| 起源 | 深圳 |
模块化SC-C90
模块化患者监护仪
17寸触摸屏
特征：
CardioTec TM 12引导心电图
2.内置12导联心电图，12导联ECG波形显示在一个屏幕上
3. 呼吸暂停报警
4.采样速率> = 50mL / min（miniflow）低）
5. 17寸HDV液晶触摸屏，分辨率1280Í1024，触摸屏和键操作peration.
6.外部管理机构：隐藏接口，防尘，防止异物掉入，统一管理数据线
7.多个USB接口可以支持外部键盘，支持USB数据传输，支持SD卡存储容量扩展以及软件升级
8.各种端口用于外部设备：辅助插件盒，监视器，CIS和有线网络接口等
9. 360°视觉报警灯：三色报警灯绝对打击您的眼睛，并为生理报警和技术报警提供明确的声明alarm
10.独特的智能I-KlokTM报警系统
11.内置锂离子电池，工作时间2小时。
12. 支持内置热敏打印机。
13. 4 + 1功能模块插槽， 不可热插拔，支持全模块随机组合，软件自动识别，界面动态组合
14.模块导电接触：镀金工艺，导电性好
15.模块数据传输的红外线传输
16.Al-Mg合金散热部件：具有非凡的散热。
可以提供八个模块插槽用于功能扩展
18.模块扩展功能，具有自动识别软件和动态调整界面。
19.记录信息化整合功能档案完整的医疗记录管理记录从医院入境到出院的所有生命监测信息。
20.方便的输入模式，支持PinYin，五股，手写输入法。
21.强大的网络功能支持有线和无线接入，内置WiFi模块可选
22. 床睡觉审查界面：显示床号，病人姓名，报警信息和参数设置等其他床位信息。它支持最多4个波形的另一张床。用户可以配置动态配置和波形。
各种界面：大字体显示，OxyCRG显示，动态趋势显示，计算显示和列表显示。
24. 120分钟波形检查。
25.模块MAP图：显示运行状态
26. 用ST分析，心律失常分析，药物剂量计算，滴定形式和CIS电子病历;
27.新的数据存储模式：非压缩，波形失真;具有断电保存功能;哪个可以节省150小时的趋势图＆图表; 5000组NIBP列表和120分钟波形审查。view.
28.模块的六个参数：ECG /心率/呼吸/温度/ NIBP / SPo2,30，具有原位4.3'LCD显示屏，可应用独立操作系统，可用于C90插件模块或单独监视器.nitor。
29. 与C90一起使用的C30可以同时显示双屏。
30.可以在C30和C90之间交换患者数据，使得C30可以帮助实现数据传输并且共享C90之间的数据。
31. 1.2m防跌落模块
32. 2600mAh锂离子电池，支持患者信息无缝转移。
C90和模块可以同时打开和关闭。
主机可升级为无创性心脏输出ICG，入侵心输出量，麻醉气体，有创血压，深度麻醉功能。
标准配置:(背面显示器）
12-lead ecg / hr，masimo spo2，pr，temp，nibp， co2软件和套接字标准
可选配置：（模块化）
打印机，单或双IBP， 主流ETCO2，Sidestream ETCO2， Nellcor SpO2
17寸触摸屏
特征：
CardioTec TM 12引导心电图
2.内置12导联心电图，12导联ECG波形显示在一个屏幕上
3. 呼吸暂停报警
4.采样速率> = 50mL / min（miniflow）低）
5. 17寸HDV液晶触摸屏，分辨率1280Í1024，触摸屏和键操作peration.
6.外部管理机构：隐藏接口，防尘，防止异物掉入，统一管理数据线
7.多个USB接口可以支持外部键盘，支持USB数据传输，支持SD卡存储容量扩展以及软件升级
8.各种端口用于外部设备：辅助插件盒，监视器，CIS和有线网络接口等
9. 360°视觉报警灯：三色报警灯绝对打击您的眼睛，并为生理报警和技术报警提供明确的声明alarm
10.独特的智能I-KlokTM报警系统
11.内置锂离子电池，工作时间2小时。
12. 支持内置热敏打印机。
13. 4 + 1功能模块插槽， 不可热插拔，支持全模块随机组合，软件自动识别，界面动态组合
14.模块导电接触：镀金工艺，导电性好
15.模块数据传输的红外线传输
16.Al-Mg合金散热部件：具有非凡的散热。
可以提供八个模块插槽用于功能扩展
18.模块扩展功能，具有自动识别软件和动态调整界面。
19.记录信息化整合功能档案完整的医疗记录管理记录从医院入境到出院的所有生命监测信息。
20.方便的输入模式，支持PinYin，五股，手写输入法。
21.强大的网络功能支持有线和无线接入，内置WiFi模块可选
22. 床睡觉审查界面：显示床号，病人姓名，报警信息和参数设置等其他床位信息。它支持最多4个波形的另一张床。用户可以配置动态配置和波形。
各种界面：大字体显示，OxyCRG显示，动态趋势显示，计算显示和列表显示。
24. 120分钟波形检查。
25.模块MAP图：显示运行状态
26. 用ST分析，心律失常分析，药物剂量计算，滴定形式和CIS电子病历;
27.新的数据存储模式：非压缩，波形失真;具有断电保存功能;哪个可以节省150小时的趋势图＆图表; 5000组NIBP列表和120分钟波形审查。view.
28.模块的六个参数：ECG /心率/呼吸/温度/ NIBP / SPo2,30，具有原位4.3'LCD显示屏，可应用独立操作系统，可用于C90插件模块或单独监视器.nitor。
29. 与C90一起使用的C30可以同时显示双屏。
30.可以在C30和C90之间交换患者数据，使得C30可以帮助实现数据传输并且共享C90之间的数据。
31. 1.2m防跌落模块
32. 2600mAh锂离子电池，支持患者信息无缝转移。
C90和模块可以同时打开和关闭。
主机可升级为无创性心脏输出ICG，入侵心输出量，麻醉气体，有创血压，深度麻醉功能。
标准配置:(背面显示器）
12-lead ecg / hr，masimo spo2，pr，temp，nibp， co2软件和套接字标准
可选配置：（模块化）
打印机，单或双IBP， 主流ETCO2，Sidestream ETCO2， Nellcor SpO2
| Model NO. | SC-C90 |
| Type | Patient/Fetal/Maternal Monitor |
| Group | All Patient |
| Specification | g. w: 23kg |
| HS Code | 90181930 |
| Classification | Medical Diagnostic Equipment |
| Certification | CE, ISO13485 |
| Medical Device Regulatory Type | Type 2 |
| Origin | Shenzhen |
Modular SC-C90
Modular Patient Monitor
17inch touch screen
Features:
1. CardioTec TM 12 leads ECG
2. Built-in 12-lead ECG, 12-lead ECG waveforms displayed in one screen
3. Apnea alarm
4. sampling rate ﹥=50mL/min(miniflow)low)
5. 17 inch HDV LCD touch screen, resolution1280Í1024, touch panel and key operationperationperation.
6. External ports management house: to conceal interfaces, to keep dust away, to prevent foreign matter drop in, and to manage uniformly the data lines
7. Multiple USB interfaces can support external keyboard, support USB data transfer, support SD card storage capacity extension as well as software upgrade
8. various ports for external devices: auxiliary plug-in box, monitor, CIS and cable network interface and so on
9. 360° visual alarm lamp: three-color alarm lamp to strike your eye definitely, and make clear for physiological alarm and technical alarmalarmalarm
10. Unique Intelligent I-KlokTM alarm system
11. Built-in Li-ion battery, 2 hours working time.
12. Support built-in thermal printer.
13. 4+1 functional module slot, which is not hot swappable, supporting full -module random combination, automatic identification with software, and interface dynamic combination
14. Module conductive contact: gold-plating process, superior conductivity
15. Infrared transmission for module data transfer
16. Al-Mg alloy heat dissipation components: having extraordinary heat dissipation.
17. Eight module slots can be provided for function expansion
18. The Module Extension Function with automatic identification for software and dynamic adjustment for interface.
19. Informatization integration function of record archives a complete medical record management to record all life monitoring information from hospital entry to exit.
20. Convenient input mode, support PinYin, five-stock, hand writing input method.
21. Powerful network function to support wire and wireless access, built-in WiFi module selectable
22. Bed to bed review interface: To display other bed information such as bed No., patient's name, alarm information and parameter setup. It supports at most 4 waveforms of another bed. Users can configure dynamic configuration and waveform.
23. Various interface: big font display, OxyCRG display, dynamic trend display, calculation display and list display.
24. 120 minutes waveform review.
25. Module MAP diagram: To display operating status
26. With ST analysis, arrhythmia analysis, drug dose calculation, titration form and CIS electronic medical record;
27. New data storage mode: Non-compression, waveform distortion; With Power-off storage function; Which can save 150 hours trend diagram & chart; 5000 groups NIBP list and 120 minutes waveforms review.view.view.
28. Six parameters of the module: ECG/heart rate/breathe/temperature/NIBP/SPo2,30 with in-situ 4.3' LCD display, coped with independent operating system which can be used either for C90 plug-in module or separate monitor.nitor.
29. C30 used together with C90 can be displayed with double screens simultaneously.
30. Patient data can be exchanged between C30 and C90, such that C30 can help to realize the data transfer and to share the data between C90 one another.
31. 1.2m drop proof for the module
32. 2600mAh Li-ion battery, support patients information seamless transfer.
33. C90 and the module can turn on and turn off simultaneously.
34. Host can be upgraded to Noninvasive cardiac output ICG, Invasive cardiac output, Anesthetic gasses, Invasive blood pressure, Depth of anesthesia function.
Standard Configuration: (backside monitor)
12-leads ECG/HR, Masimo SpO2, PR,TEMP, NIBP, co2 software and socket standard
Optional Configuration: (modular)
Printer, single or double IBP, Mainstream ETCO2, Sidestream ETCO2, Nellcor SpO2
17inch touch screen
Features:
1. CardioTec TM 12 leads ECG
2. Built-in 12-lead ECG, 12-lead ECG waveforms displayed in one screen
3. Apnea alarm
4. sampling rate ﹥=50mL/min(miniflow)low)
5. 17 inch HDV LCD touch screen, resolution1280Í1024, touch panel and key operationperationperation.
6. External ports management house: to conceal interfaces, to keep dust away, to prevent foreign matter drop in, and to manage uniformly the data lines
7. Multiple USB interfaces can support external keyboard, support USB data transfer, support SD card storage capacity extension as well as software upgrade
8. various ports for external devices: auxiliary plug-in box, monitor, CIS and cable network interface and so on
9. 360° visual alarm lamp: three-color alarm lamp to strike your eye definitely, and make clear for physiological alarm and technical alarmalarmalarm
10. Unique Intelligent I-KlokTM alarm system
11. Built-in Li-ion battery, 2 hours working time.
12. Support built-in thermal printer.
13. 4+1 functional module slot, which is not hot swappable, supporting full -module random combination, automatic identification with software, and interface dynamic combination
14. Module conductive contact: gold-plating process, superior conductivity
15. Infrared transmission for module data transfer
16. Al-Mg alloy heat dissipation components: having extraordinary heat dissipation.
17. Eight module slots can be provided for function expansion
18. The Module Extension Function with automatic identification for software and dynamic adjustment for interface.
19. Informatization integration function of record archives a complete medical record management to record all life monitoring information from hospital entry to exit.
20. Convenient input mode, support PinYin, five-stock, hand writing input method.
21. Powerful network function to support wire and wireless access, built-in WiFi module selectable
22. Bed to bed review interface: To display other bed information such as bed No., patient's name, alarm information and parameter setup. It supports at most 4 waveforms of another bed. Users can configure dynamic configuration and waveform.
23. Various interface: big font display, OxyCRG display, dynamic trend display, calculation display and list display.
24. 120 minutes waveform review.
25. Module MAP diagram: To display operating status
26. With ST analysis, arrhythmia analysis, drug dose calculation, titration form and CIS electronic medical record;
27. New data storage mode: Non-compression, waveform distortion; With Power-off storage function; Which can save 150 hours trend diagram & chart; 5000 groups NIBP list and 120 minutes waveforms review.view.view.
28. Six parameters of the module: ECG/heart rate/breathe/temperature/NIBP/SPo2,30 with in-situ 4.3' LCD display, coped with independent operating system which can be used either for C90 plug-in module or separate monitor.nitor.
29. C30 used together with C90 can be displayed with double screens simultaneously.
30. Patient data can be exchanged between C30 and C90, such that C30 can help to realize the data transfer and to share the data between C90 one another.
31. 1.2m drop proof for the module
32. 2600mAh Li-ion battery, support patients information seamless transfer.
33. C90 and the module can turn on and turn off simultaneously.
34. Host can be upgraded to Noninvasive cardiac output ICG, Invasive cardiac output, Anesthetic gasses, Invasive blood pressure, Depth of anesthesia function.
Standard Configuration: (backside monitor)
12-leads ECG/HR, Masimo SpO2, PR,TEMP, NIBP, co2 software and socket standard
Optional Configuration: (modular)
Printer, single or double IBP, Mainstream ETCO2, Sidestream ETCO2, Nellcor SpO2
