China Manufacturers Cheap Medical Infusion Pump
中国制造商廉价医用输液泵
MSLIS23多功能双通道医用输液泵低价顶输液泵
产品简介：
MSLIS23型输液泵是我公司的第二代产品。它有液晶显示屏和微电脑控制。蠕动泵是具有多个传感器的动力源，以监测输液泵并且具有各种报警功能。它易于操作，并满足各种输血情况的需求，如单次输液，同时输液两种液体或输液两人。使用具有输注泵的输注装置，其可以控制到患者的液体流。
技术参数：
产品功能：
到输液设备
普通输液装置：可以使用普通的PVC滴定透明或荧光注射装置（管直径约3.5mm）。请确保输液器的管径和管壁必须有一定的弹性系数。新的输液装置应在第一次使用前进行输液精度的校准。
注意：输液装置的其他规格可能无法保持精度（即使正在校准精度）
专业输液设备：专用输液设备具有高弹性硅胶管。请联系我公司采购。
警告：如果使用不推荐的输液器，泵可能无法保持精度。
AC / DC选择：内置NI-MH可充电电池，确保设备仍然可以在突然断电时使用。机器在电池电量低时自动充电，充满电后停止，指示灯熄灭。请确保在7小时左右充满电，否则会缩短电池的使用寿命。当电池电量耗尽时，会发出低压报警，指示灯闪烁，提醒操作人员及时处理。
快速排气：按下快速排气按钮两次，进入快速排气状态。停止状态是快速排气，并且排出的液体将不被计入累积输注速率。开始状态为快速输液，排出液体将计入累计输液速率。松开按钮，快速排气状态将停止
输液速率：具有Drop / min和ml / h两种设置模式供用户选择。
注意：Drop / min和ml / h是从20滴/ ml，这是不同于实际下降。
呼叫接口：预留呼叫接口，为护士站提供集中监控功能。
产品简介：
MSLIS23型输液泵是我公司的第二代产品。它有液晶显示屏和微电脑控制。蠕动泵是具有多个传感器的动力源，以监测输液泵并且具有各种报警功能。它易于操作，并满足各种输血情况的需求，如单次输液，同时输液两种液体或输液两人。使用具有输注泵的输注装置，其可以控制到患者的液体流。
技术参数：
输液流速 | |
专业输液设备 | 0.1ml / h-1200ml / h |
普通输液器 | 0.1ml / h-600ml / h |
备注：用0.1-30ml / h（0.1ml / h /步）;超过30ml / h（1ml / h /步）。 | |
输液精度误差 | |
专业输液设备 | ±5％（中速，23℃，湿度：60％） |
普通输液器 | ±10％（中速，23℃，湿度：60％） |
总输液量预设 | 0.1-9999ml |
备注：用0.1-30ml（0.1ml /步）;超过30ml（1ml /步） | |
闭塞灵敏度：它具有三个可调节的闭塞压力水平，高，中和低 | |
低速（1ml / h） | 250〜500秒; |
中速（120ml / h） | 7〜14秒 |
高速（600ml / h） | 0.2〜1秒 |
产品功能：
| 自动输液 | 根据医生的建议，设置输液量和 速度。线性蠕动泵是微电脑控制的 将管理输液泵使自动 根据设置的输注速度进行输注。 |
| KVO状态 | 在完成输液的总体积后，泵将 自动切换到KVO状态。 （保持静脉打开状态）。 |
| 声光报警 | 五种报警，包括闭锁报警，气泡报警，开门报警， 输液完成报警和欠压报警。当输液失败时，可听见 并发生视觉报警，提醒操作人员及时处理。 |
| 适用于各种液体 | 它可用于注入无色透明液体和高营养液 和颜色不透明液体。 |
到输液设备
普通输液装置：可以使用普通的PVC滴定透明或荧光注射装置（管直径约3.5mm）。请确保输液器的管径和管壁必须有一定的弹性系数。新的输液装置应在第一次使用前进行输液精度的校准。
注意：输液装置的其他规格可能无法保持精度（即使正在校准精度）
专业输液设备：专用输液设备具有高弹性硅胶管。请联系我公司采购。
警告：如果使用不推荐的输液器，泵可能无法保持精度。
AC / DC选择：内置NI-MH可充电电池，确保设备仍然可以在突然断电时使用。机器在电池电量低时自动充电，充满电后停止，指示灯熄灭。请确保在7小时左右充满电，否则会缩短电池的使用寿命。当电池电量耗尽时，会发出低压报警，指示灯闪烁，提醒操作人员及时处理。
快速排气：按下快速排气按钮两次，进入快速排气状态。停止状态是快速排气，并且排出的液体将不被计入累积输注速率。开始状态为快速输液，排出液体将计入累计输液速率。松开按钮，快速排气状态将停止
输液速率：具有Drop / min和ml / h两种设置模式供用户选择。
注意：Drop / min和ml / h是从20滴/ ml，这是不同于实际下降。
呼叫接口：预留呼叫接口，为护士站提供集中监控功能。
MSLIS23 Multifunctional Double channel Medical infusion pump Cheap top infusion pump
Product brief introduction:
MSLIS23 model infusion pump is the second generation product by our company. It has LCD display screen and micro computer controlled. The peristaltic pump is power source with multiple sensors to monitor the infusion pump and has variety of alarm functions. It's easy to operate and meets all the demand of various cases of transfusion, like single infusion, infusion two liquids at the same time or infusion for two people. Using infusion apparatus with the infusion pump, it can control the liquid flow to the patient.
Technical parameters:
Product function:
pply to infusion apparatus
Ordinary infusion apparatus: Normal PVC titration transparent or lucifuge infusion apparatus (pipe diameter is about 3.5mm) can be used. Please make sure the pipe diameter and pipe wall of infusion apparatus must have a certain elasticity coefficient. New infusion apparatus should take calibration of the infusion precision before the first use.
Note: Other specifications of the infusion apparatus may not be able to maintain accuracy (Even if the precision is being calibrated)
Specialized infusion apparatus: Specialized infusion apparatus has high elastic silicone tube. Please contact our company for purchasing.
Warning: The pump may be unable to maintain accuracy if use infusion apparatus which is not recommended.
AC/DC alternative: Built-in NI-MH rechargeable battery makes sure the device still can be used when the sudden power off. The machine automatically charges itself when the battery volume is low and stop when it's fully charged, and the indication light switches off. Please make sure it's fully charged around 7hours or it will shorten the lifespan of battery. Low voltage alarm will occur and indication light will flash when the battery mostly runs out in order to remind the operators to dispose in time.
Quick exhaust: Press the quick exhaust button twice and enter into quick exhaust status. The stop status is quick exhaust, and the exhausted liquid will not be counted into cumulative infusion rate. Start state is quick transfuse, discharged liquid will be counted into cumulative infusion rate. Loosen the button, the quick exhaust state will be stopped
Infusion rate: It has Drop/min and ml/h two setting modes for users to choose.
Note: Drop/min and ml/h is conversed from 20 Drops/ml, which is different from the actual drops.
Call interface: Reserve call interface to provide the centralized monitoring function for nurse station.
Product brief introduction:
MSLIS23 model infusion pump is the second generation product by our company. It has LCD display screen and micro computer controlled. The peristaltic pump is power source with multiple sensors to monitor the infusion pump and has variety of alarm functions. It's easy to operate and meets all the demand of various cases of transfusion, like single infusion, infusion two liquids at the same time or infusion for two people. Using infusion apparatus with the infusion pump, it can control the liquid flow to the patient.
Technical parameters:
Infusion flow rate | |
Specialized infusion apparatus | 0.1ml/h-1200ml/h |
Ordinary infusion apparatus | 0.1ml/h-600ml/h |
Remarks: with 0.1-30ml/h (0.1ml/h/step); over 30ml/h(1ml/h/step). | |
Infusion accuracy error | |
Specialized infusion apparatus | ±5%(medium speed, 23ºC, humidity: 60%) |
Ordinary infusion apparatus | ±10%(medium speed, 23ºC, humidity: 60%) |
Total infusion volume preset | 0.1-9999ml |
Remarks: with 0.1-30ml (0.1ml/step); over 30ml (1ml/step) | |
Occlusion sensitivity:It has three adjustable levels of occlusion pressure as high, medium and low | |
Low speed (1ml/h) | 250~500 seconds; |
Medium speed (120ml/h) | 7~14 seconds |
High speed(600ml/h) | 0.2~1 seconds |
Product function:
| Automatic infusion | According to the doctor's advice, set the infusion volume and speed. The linear peristaltic pump which is microcomputer controlled will manage infusion pump to make automatic infusion according to the setting infusion speed. |
| KVO status | After finishing the the total volume of infusion, the pump will switch to KVO status automatically. (keep vein open status). |
| Audible and visual alarm | Five kinds of alarms including Occlusion alarm, Bubble alarm, Door Open alarm, Infusion Finished alarm and Undervoltage alarm. When infusion failed, audible and visual alarm will occur and remind the operators to dispose in time. |
| Apply to variety liquids | It can be used to infuse colorless transparent liquid and high nutrient solutions and color opaque liquid. |
pply to infusion apparatus
Ordinary infusion apparatus: Normal PVC titration transparent or lucifuge infusion apparatus (pipe diameter is about 3.5mm) can be used. Please make sure the pipe diameter and pipe wall of infusion apparatus must have a certain elasticity coefficient. New infusion apparatus should take calibration of the infusion precision before the first use.
Note: Other specifications of the infusion apparatus may not be able to maintain accuracy (Even if the precision is being calibrated)
Specialized infusion apparatus: Specialized infusion apparatus has high elastic silicone tube. Please contact our company for purchasing.
Warning: The pump may be unable to maintain accuracy if use infusion apparatus which is not recommended.
AC/DC alternative: Built-in NI-MH rechargeable battery makes sure the device still can be used when the sudden power off. The machine automatically charges itself when the battery volume is low and stop when it's fully charged, and the indication light switches off. Please make sure it's fully charged around 7hours or it will shorten the lifespan of battery. Low voltage alarm will occur and indication light will flash when the battery mostly runs out in order to remind the operators to dispose in time.
Quick exhaust: Press the quick exhaust button twice and enter into quick exhaust status. The stop status is quick exhaust, and the exhausted liquid will not be counted into cumulative infusion rate. Start state is quick transfuse, discharged liquid will be counted into cumulative infusion rate. Loosen the button, the quick exhaust state will be stopped
Infusion rate: It has Drop/min and ml/h two setting modes for users to choose.
Note: Drop/min and ml/h is conversed from 20 Drops/ml, which is different from the actual drops.
Call interface: Reserve call interface to provide the centralized monitoring function for nurse station.
