Medical Infusion Pump with Warmer (MSLIS04)
医用输液泵（MSLIS04）
MSLIS04 IV流体控制器单元
多功能输液控制
2.带温暖的滴水控制器
3.输液泵加热器
我们的研发生产的MSLIS04“多功能输液加温器控制器”，是国家专利产品和流体控制和热控制的同步。它填补了行业的空白，具有以下特点和临床意义
特点：
1.输液控制+温度控制，双控制功能
2.在低温，四个级别更暖的设置，以提高舒适性，减少副作用。
3.任意输液速率和自动调节，输液精度±5％，保证准确输液。
4.三种模式：滴/ min，ml / h和时间模式
5.友好的界面，键盘视觉简洁，只需把管子放入加热的旋转盘，然后连接电源开始加热。
6.监控及时，多重报警，安全可靠;简化护理和陪护过程
7.节能环保，电源只有1瓦（无加热状态），无任何污染和浪费，全功率可使用8小时以上
8.紧凑，重量只有420克（含电池），花瓶放在输液椅上，吊轨管等，无需特殊用品，是安全，经济，科学的装置
9.适用范围广：可应用于输血，输血和传播场合的营养
输液加热器的临床意义：
1.输液加热可以消除或降低液体温度低，由于输液反应引起，特别是对老年人和儿童身体冷输液，血管痉挛，疼痛，寒战，胃痛，咳嗽等不良刺激时，消除或减少效应;
2.消除或减少为液体温度平衡支付的物理消耗
3.提高分子运动的速度有利于充分效能，易吸收;
4.提高输液速度，缩短输液时间
5.如果长期低温流体，易发生动脉硬化，特别是春，秋，冬较为明显，输液加热器可使输液不冷却无痛，使治疗更人性化。
6.加热可以消除药物分配的低温溶解和病人输液不良的冷现象。 2006年1月修订的美国输血标准护理也提出，加热至35°C之前分配液体。
多功能输液控制
2.带温暖的滴水控制器
3.输液泵加热器
我们的研发生产的MSLIS04“多功能输液加温器控制器”，是国家专利产品和流体控制和热控制的同步。它填补了行业的空白，具有以下特点和临床意义
特点：
1.输液控制+温度控制，双控制功能
2.在低温，四个级别更暖的设置，以提高舒适性，减少副作用。
3.任意输液速率和自动调节，输液精度±5％，保证准确输液。
4.三种模式：滴/ min，ml / h和时间模式
5.友好的界面，键盘视觉简洁，只需把管子放入加热的旋转盘，然后连接电源开始加热。
6.监控及时，多重报警，安全可靠;简化护理和陪护过程
7.节能环保，电源只有1瓦（无加热状态），无任何污染和浪费，全功率可使用8小时以上
8.紧凑，重量只有420克（含电池），花瓶放在输液椅上，吊轨管等，无需特殊用品，是安全，经济，科学的装置
9.适用范围广：可应用于输血，输血和传播场合的营养
输液加热器的临床意义：
1.输液加热可以消除或降低液体温度低，由于输液反应引起，特别是对老年人和儿童身体冷输液，血管痉挛，疼痛，寒战，胃痛，咳嗽等不良刺激时，消除或减少效应;
2.消除或减少为液体温度平衡支付的物理消耗
3.提高分子运动的速度有利于充分效能，易吸收;
4.提高输液速度，缩短输液时间
5.如果长期低温流体，易发生动脉硬化，特别是春，秋，冬较为明显，输液加热器可使输液不冷却无痛，使治疗更人性化。
6.加热可以消除药物分配的低温溶解和病人输液不良的冷现象。 2006年1月修订的美国输血标准护理也提出，加热至35°C之前分配液体。
MSLIS04 IV fluid controller unit
1. Multi-functional infusion controll
2. IV drip controller with warmer
3. Infusion pump with warmer
Our research and development production of MSLIS04 'Multi-purpose infusion-warmer controller', is national patent product and synchronization of the fluid control and heat control. It fills the gap in the industry, and has the following characteristics and Clinical Significance
Characteristics:
1. Infusion control + temperature control, dual control functions
2. In the low temperature, four levels warmer setting to improve comfort and reduce side effects.
3. Arbitrary infusion rate and automatic adjustment, infusion accuracy of ± 5% to guarantee accurate infusion.
4. Three modes in one: Drop / min, ml / h and time patterns
5. Friendly interface, keyboard visual simplicity, and just put tube into the heated rotating disk then connect power began to heat.
6. Monitoring timely, multiple alarm, safety and reliability; Simplified care and accompany process
7. Energy-saving environmental protection, power is only 1 watt (no heating state), without any pollution and waste, full power can be used for more than 8 hours
8. Compact, weighing only 420 grams (including battery), which blossoms placed in the infusion chair, hanging rail tube, etc., no special supplies, it is security, economic, scientific device
9. Applicable to a wide range: Can be applied in transfusion, blood transfusion and transmission occasions nutrition
Clinical Significance of infusion warmer:
1. Infusion heating can eliminate or reduce the liquid temperature is low due to infusion reactions caused, especially to the elderly and children with body when the cold infusion, vascular spasm, pain, chills, stomach pain, cough and other adverse stimuli, have to eliminate or reduce the effect;
2. To eliminate or reduce the the physical consumption paid for the balance of temperature of the liquid
3. To improve the speed of molecular movement is conducive to full efficacy, easy to absorb;
4. Improve the infusion rate, shorten the infusion time
5. If the long-term low-temperature fluids, prone to hardening of the arteries, especial in Spring, Autumn and Winter is more obvious, infusion warmer can make the infusion is not cool and no pain, making treatment more humanized.
6. Heating can eliminate the low-temperature dissolution of pharmaceutical dispensing and patient infusion bad cold phenomena. January 2006 revised American Association of Transfusion Standard of care was also raised that heated to 35 ° C before dispensing liquid.
1. Multi-functional infusion controll
2. IV drip controller with warmer
3. Infusion pump with warmer
Our research and development production of MSLIS04 'Multi-purpose infusion-warmer controller', is national patent product and synchronization of the fluid control and heat control. It fills the gap in the industry, and has the following characteristics and Clinical Significance
Characteristics:
1. Infusion control + temperature control, dual control functions
2. In the low temperature, four levels warmer setting to improve comfort and reduce side effects.
3. Arbitrary infusion rate and automatic adjustment, infusion accuracy of ± 5% to guarantee accurate infusion.
4. Three modes in one: Drop / min, ml / h and time patterns
5. Friendly interface, keyboard visual simplicity, and just put tube into the heated rotating disk then connect power began to heat.
6. Monitoring timely, multiple alarm, safety and reliability; Simplified care and accompany process
7. Energy-saving environmental protection, power is only 1 watt (no heating state), without any pollution and waste, full power can be used for more than 8 hours
8. Compact, weighing only 420 grams (including battery), which blossoms placed in the infusion chair, hanging rail tube, etc., no special supplies, it is security, economic, scientific device
9. Applicable to a wide range: Can be applied in transfusion, blood transfusion and transmission occasions nutrition
Clinical Significance of infusion warmer:
1. Infusion heating can eliminate or reduce the liquid temperature is low due to infusion reactions caused, especially to the elderly and children with body when the cold infusion, vascular spasm, pain, chills, stomach pain, cough and other adverse stimuli, have to eliminate or reduce the effect;
2. To eliminate or reduce the the physical consumption paid for the balance of temperature of the liquid
3. To improve the speed of molecular movement is conducive to full efficacy, easy to absorb;
4. Improve the infusion rate, shorten the infusion time
5. If the long-term low-temperature fluids, prone to hardening of the arteries, especial in Spring, Autumn and Winter is more obvious, infusion warmer can make the infusion is not cool and no pain, making treatment more humanized.
6. Heating can eliminate the low-temperature dissolution of pharmaceutical dispensing and patient infusion bad cold phenomena. January 2006 revised American Association of Transfusion Standard of care was also raised that heated to 35 ° C before dispensing liquid.
